全部博文（2759）
分类： SOLARIS
2016-08-20 05:19:29
原文地址：Solaris下core dump文件的分析方法 作者：liyf0371
Abstract: Abnormal termination of a process will trigger a core dump file. A core dump file is very helpful to programmers or support engineers for determining the root cause of abnormal termination, because it provides invaluable information about the runtime status at crash time. This article provides information about core dumps, as well as features and analysis tools in the Solaris Operating System that can be used to manage core dumps.
Note: The information provided in this article is mainly for the Solaris 10 OS.
Contents:
A core dump is a file that records the contents of a process along with other useful information, such as the processor register's value. There are two types of core dumps: system core dumps and process core dumps. They differ in many aspects, such as the manner in which they are created and the method used to analyze them.
When an application process receives a specific signal and terminates, the system generates a core dump and stops the process. In most cases, the signal leading to the application crash isSIGSEGV orSIGBUS.
SIGSEGV indicates that the application is accessing an invalid memory address. This situation often occurs in C/C++ programs if there are code errors in pointer manipulation.
On the Solaris OS, you can use the libumem(3LIB) library as the user-mode memory allocator instead oflibc. Thelibumem library can help find memory leaks, buffer overflows, attempts to use freed data, and many other memory allocation errors. Also, its memory allocator is very fast and scalable with multithreaded applications.
SIGBUS indicates that the application is accessing a memory address that does not conform to CPU memory alignment rules. This usually happens to a system with an UltraSPARC processor. Systems with x86/x64 CPUs can handle unaligned memory addresses, but there is a performance impact.
The Sun Studio C/C++ compiler has the -xmemalign option, which can be used to adjust the behavior of the UltraSPARC CPU when there are unaligned memory addresses that can be determined at compile time. The-xmemalign option causes the compiler to generate additional load/store instructions for unaligned memory access. However, the-xmemalign option cannot handle unaligned memory access during runtime. If unaligned memory access happens during runtime, the developer needs to change the source code.
There are other signals whose default disposition is to create a core dump, for example,SIGFPE, which indicates a floating point exception. TheSignal(3HEAD) man page provides more details.
The Solaris OS attempts to create up to three core dump files for each abnormally terminated process. One of the core dump files, which is called the per-process core file, is located in the current directory. Another core dump file, which is called the global core file, is created in the system-wide location. If the process is running in a local zone, a third core file is created in the global zone's location.
You can use the coreadm(1M) command to manage the core dumps. All the settings are saved in the/etc/coreadm.conf configuration file.
Below is a typical scenario, which shows the current system configuration for core dumps:
-bash-3.00# coreadm
global core file pattern:
global core file content: default
init core file pattern: core
init core file content: default
global core dumps: disabled
per-process core dumps: enabled
global setid core dumps: disabled
per-process setid core dumps: disabled
global core dump logging: disabled
|
In the previous output:
You can also use the coreadm command to control the core dump file name:
-bash-3.00# coreadm -i core.%f.%p
|
This command causes the per-process core file name to be appended with the program file name(%f) and the runtime process ID(%p). A core dump file will be generated in the current working directory of the process.
-bash-3.00# coreadm -g /globalcore/core.%f.%p -e global
|
By default, the global core dump is disabled. You need to use the coreadm command with the-e global option to enable it. The-g option causes the command to append the program name(%f) and the runtime process ID(%p) to the core file name.
As indicated previously, coreadm can specify the parts of the process that will be saved to the core file. Previously, when you performed a post-mortem analysis, you needed to obtain all the specific versions of the dependent libraries and runtime modules, because the core dump file does not contain this text information. It is quite a headache for programmers to recreate the environment from the original machine.
With the default configuration, the Solaris OS applies the "default" pattern to each process core dump, which means the process core dump contains stack, heap, text, shared memory (SHM), intimate shared memory (ISM), and dynamic intimate shared memory (DISM) information, plus other information. The text part of the process core dump also contains a partial symbol table (dynsm), which will help you get a readable stack trace directly from one core file without any other boring dependent libraries. If the dynsm is insufficient, you can use coreadm to include all symbol tables, as follows:
-bash-3.00# coreadm -G all -I all
|
This previous command makes both the global core file (-G) and the per-process core file (-I) contain all the parts of the process.
Here's how to use coreadm to verify the changes:
-bash-3.00# coreadm
global core file pattern: /globalcore/core.%f.%p
global core file content: all
init core file pattern: core.%f.%p
init core file content: all
global core dumps: enabled
per-process core dumps: enabled
global setid core dumps: disabled
per-process setid core dumps: disabled
global core dump logging: disabled
|
The coreadm command is used to edit the configuration file of thecoreadm service, which is managed by the Service Management Facility (SMF) with this service identifier:svc:/system/coreadm:default.
The Solaris OS provides the gcore(1) command in case you need to create a core dump manually for a live process for analysis purposes:
-bash-3.00# echo $$
2770
-bash-3.00# gcore $$
gcore: core.2770 dumped
|
The live process ID is appended automatically to the name of the generated core dump. In the previous example, the process of the current shell is dumped and its process ID is 2770.
Note: There are other constraints you need take into account while generating the core dump, for example, the write permissions on the destination directory, the existence of the destination directory, the file system mount option, and process resource limitation. For resource limitation information, refer to the man pages forsetrlimit(2) andulimit(1).
Another useful tool called AppCrash is available. It automatically collects diagnostic and debugging information when any application crashes under the Solaris OS. This article does not address its usage. For more information on using AppCrash, refer to Greg Nakhimovsky'sblog.
There are lots of tools in the Solaris OS for analyzing core dump files: dbx(1), mdb(1), and pstack(1). The most convenient method is to use thepstack tool to determine the process stack. This tool helps show multithreaded programs as well:
-bash-3.00# pstack core.2580 | more
core 'core.2580' of 2580: java_vm
----------------- lwp# 1 / thread# 1 --------------------
fef40a27 read (b, 804280c, 1)
feb11ba8 __1cDhpiEread6FipvI_I_ (b, 804280c, 1) + a8
feb11aef JVM_Read (b, 804280c, 1) + 2f
fe77045e ???????? (80685b8, 8042864, 22)
...
feb1d55c jni_CallStaticVoidMethod (80685b8, 8069020, 80e8355,
0) + 14c
080516c2 main (2, 8047168, 8047174) + 50c
08050daa ???????? (2, 80472cc, 80472d4, 0, 80472d5, 8047301)
----------------- lwp# 2 / thread# 2 --------------------
fef40d27 lwp_cond_wait (8067ae8, 8067ad0, fb3a9c08, 0)
fef2de3f _lwp_cond_timedwait (8067ae8, 8067ad0, fb3a9c50) + 35
...
fef3fc32 _thr_setup (fef82400) + 4e
fef3ff20 _lwp_start (fef82400, 0, 0, fb3a9ff8, fef3ff20,
fef82400)
----------------- lwp# 3 / thread# 3 --------------------
fef40d27 lwp_cond_wait (8116588, 8116570, 0, 0)
feab737c __1cCosHSolarisFEventEpark6M_v_ (8116548) + 4c
...
|
In general, if the program's symbol table is not stripped and its runtime stack trace is available, you can expect almost 50 percent of the problems to be resolved.
dbx is a free source-level debug tool provided by Sun Studio software. Sun Studio software includes free, optimizing C, C++, and Fortran compilers that can be used on both the Solaris OS and Linux.dbx not only helps you inspect the state of your program, but it also collects the program performance data. Here is a typical scenario for analyzing the core file usingdbx. For more details ondbx, please refer to the document called.
-bash-3.00# /opt/SUNWspro/bin/dbx tServer core
For information about new features see 'help changes'
To remove this message, put 'dbxenv suppress_startup_message 7.5'
in your .dbxrc
Reading tServer
core file header read successfully
Reading ld.so.1
Reading libpthread.so.1
Reading librt.so.1
Reading libsocket.so.1
Reading libnsl.so.1
Reading libc.so.1
Reading libthread.so.1
Reading libCrun.so.1
Reading libm.so.1
Reading libkstat.so.1
t@1 (l@1) program terminated by signal SEGV (no mapping at
the fault address)
0xffffffff7ce3ce90: strcmp+0x0014: ldub [%i1], %i5
Current function is txnAtomMatchRqst
177 && strcmp(pMsg->inHeader.msgVer, "01" == 0)) {
(dbx) threads ** show all the threads
o> t@1 a l@1 ?() signal SIGSEGV in strcmp()
t@2 b l@2 tTimerThread() LWP suspended in __pollsys()
(dbx) thread -info t@1 ** show the thread information
Thread t@1 (0xffffffff7a500000) at priority 0
state: active on l@1
base function: 0x0: 0x0000000000000000() stack:
0xffffffff80000000[8388608]
flags: (none)
masked signals: (none)
Currently active in strcmp
(dbx) where ** show the thread stack
current thread: t@1
[1] strcmp(0x100263d63, 0x0, 0xac, 0x0, 0x30, 0x31), at
0xffffffff7ce3ce90
=>[2] tAtomMatchRqst(), line 177 in "tAtomMatchRqst.c"
[3] tFlow(), line 96 in "tFlow.c"
[4] tServer(rqst = 0x1001e6c58), line 73 in "tServer.c"
[5] _tsvcdsp(0x1700, 0x0, 0x10004ca60, 0x1001e55c0, 0x0,
0x1001d9440), at 0xffffffff7e15d138
[6] _trunserver(0x1001e3844, 0x1001da958, 0x0,
0xffffffff7e3525c8, 0x1400, 0x1001ee400), at 0xffffffff7e180ea0
[7] _tstartserver(0x0, 0xffffffff7ffff568, 0x1001bcc38,
0x1001d9440, 0x0, 0x0), at 0xffffffff7e15be28
[8] main(0xf, 0xffffffff7ffff568, 0xffffffff7ffff5e8, 0x0,
0x0, 0x100000000), at 0x1000099ec
(dbx) quit
-bash-3.00#
|
From the previous example, you can use dbx to determine the abnormal thread, which is marked with "o," and its root cause by showing the source code. Of course, this will not happen unless you provide the application source code and add debug information during the compile phase.
If you are familiar with assembly language and hardware specifications, you can usemdb to debug the core file, becausemdb is a low-level debugging utility for both programs and the Solaris OS.
There are lots of reasons why the Solaris OS might crash and produce a core dump. Not only software problems, such as like drivers and programs, but also hardware errors can induce a system core dump.
When detecting whether the integrity of data was corrupted or whether a fatal error in hardware occurred, the Solaris OS invokespanic(). Thepanic() routine interrupts all processes as if the OS is suspended. Then it generates a system core dump, which is a copy of OS in the memory, and saves it to the dump device. After a crash, the OS usesavecore(1) to retrieve the core dump from the dump device to thesavecore directory during the next boot. Thesavecore routine generates two files. One file isunix.
You can use dumpadm(1M) to manage dump devices and the savecore directory:
-bash-3.00# dumpadm -d /dump -s /savecore
Dump content: kernel pages
Dump device: /dump (dedicated)
Savecore directory: /savecore
Savecore enabled: yes
|
To verify this or see the current configuration, you can run only dumpadm:
-bash-3.00# dumpadm
Dump content: kernel pages
Dump device: /dump (dedicated)
Savecore directory: /savecore
Savecore enabled: yes
|
You can also use dumpadm to set the dump content and enable savecore(1) operation during the boot.
All the configuration information is saved in the /etc/dumpadm.conf configure file. The system crash dump service is also managed by SMF with this service identifier:svc:/system/dumpadm:default.
In some cases, you need to save a core dump manually to take a snapshot of the live system. In the Solaris OS, there are several means you can use. For example, you can usereboot -d to force the generation of a core dump with reboot. Or you can usesavecore -L to create a live OS core dump. If you want to usesavecore(1M) to create a live core dump, you must usedumpadm to set a non-swap device as the dump device, because live core dumps take a swap device as a part of virtual memory, which is to be dumped.
Sometimes, the system will hang without crashing. If you are using a Sun UltraSPARC processor-based machine, you can press Stop-A to run in OpenBoot PROM (OBP) mode, and then use thesync OBP command to force a crash core dump.
On x86 platforms, there is no corresponding OBP unit. However, you can use kmdb(1M). To use kmdb to create a core dump, you need load its module during system booting.
Here are the steps for the Solaris 10 1/06 OS or later.
title Solaris 10 11/06 s10x_u3wos_10 X86
root (hd0,1,a)
kernel /platform/i86pc/multiboot -k
module /platform/i86pc/boot_archive
|
This will make the OS boot with kmdb.
Alternatively, if you are using the Solaris 10 GA OS, just enter b -k when you see theSelect (B)oot or (I)nterpreter: system prompt during the system boot stage.
After performing these steps, press F1-A to break the system to kmdb. This action must be performed in console mode, becausekmdb suspends the system and GUI applications. If you are using a desktop system, the Solaris OS will fail to switch to console mode and your desktop will appear to hang. Howeverkmdb is running and you can still type commands.
$ |
The systemdump command generates the core dump file for you. The dump device andsavecore directory for this operation are still constrained bydumpadm.
Sometimes, the system will hang without any response even when you use kmdb or OBP. In this case, use the "deadman timer." The deadman timer allows the OS to force a kernel panic in the event of a system hang. This feature is available on x86 and SPARC systems. Add the following line to /etc/system and reboot so the deadman timer will be enabled.
set snooping=1
|
The enabled deadman timer will perform a level 15 interrupt once a second. It will check whether the kernellbolt variable is updated. If the deadman timer notices that thelbolt variable has not been incremented for a period of time (the default is 50 seconds), it will cause a panic. The period of time can be configured in/etc/system. The following example makes the deadman timer wait 120 seconds for thelbolt variable update:
set snoop_interval=120000000
|
Solaris Dynamic Tracing (DTrace) was introduced with the release of Solaris 10 OS. DTrace allows you to understand and explore applications or the operating system. DTrace contains a feature called Anonymous Tracing. It provides device driver developers with a way to debug and trace system activity that occurs during the system boot. If the Solaris OS hangs, you can use this feature to generate a core dump and catch other information you want. For the information on using DTrace, refer to the and the.
This article cannot provide solutions for fixing a system core dump, because such an analysis requires much low-level computing knowledge of the OS kernel and also of the hardware. However here are some basic guidelines for your reference:
Thanks to Xinfeng Liu and Oliver Yang, Professional Engineers from the Sun China Engineering & Research Institute, for their invaluable comments.
The author can also be reached at .
