华为单臂路由实战

华为路由器AR Huawei AR2240 Route
路由器配置
如果利用路由器作为dhcp服务器，交换机作为dhcp delay中继使用。
 #

dhcp enable

#

ip pool 1

 gateway-list 192.168.1.1 

 network 192.168.1.0 mask 255.255.255.0 

 dns-list 192.168.1.8 

#

ip pool 2

 gateway-list 192.168.2.1 

 network 192.168.2.0 mask 255.255.255.0 

 dns-list 192.168.2.8 

# 

#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/1.1
 dot1q termination vid 10
 ip address 192.168.1.1 255.255.255.0
 dhcp select global
#
interface GigabitEthernet0/0/1.2
 dot1q termination vid 20
 ip address 192.168.2.1 255.255.255.0
 dhcp select global
#
交换机relay配置：
一般dhcp-server跟交换机不在同一个设备上。
#

interface GigabitEthernet0/0/0
#
interface GigabitEthernet0/0/0.2
 dot1q termination vid 2
 ip address 172.16.1.1 255.255.255.0
 arp broadcast enable
#
interface GigabitEthernet0/0/0.3
 dot1q termination vid 3
 ip address 172.16.2.1 255.255.255.0
 arp broadcast enable
#
interface GigabitEthernet0/0/0.4
 dot1q termination vid 4
 ip address 172.16.3.1 255.255.255.0
 arp broadcast enable
#

交换机配置
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 2 to 4094
#
interface GigabitEthernet0/0/2
 port link-type access
 port default vlan 2
#
interface GigabitEthernet0/0/3
 port link-type access
 port default vlan 3
#
interface GigabitEthernet0/0/4

 port default vlan 4
#

.rar