1、 求 20 以内的质数
MySQL8:
with recursive t(n) as (
select 1
union all select n+1 from t where n<20)
select n from t
where n!=1 and n not in (select t1.n*t2.n from t t1 join t t2 on t1.n<=t2.n where t1.n>1 and t2.n between 2 and 20/2 and t1.n*t2.n<=20);
集算器SPL:
A | |
1 | =to(20) |
2 | =to(2,20/2) |
3 | =A2.(A1.step(~,~*2)) |
4 | =A1.to(2,)\A3.conj() |
A3: 针对A2中每一个成员,求出它在20以内的n倍数(n>1),并将所有计算结果组成序列返回
A4: 除去1和所有20以内的合数即为20以内的素数,其中A3.conj()求出20以内的合数
2、 求格力电器 (000651) 最长上涨天数
MySQL8:
with recursive t1 as (select *,row_number() over(order by tdate) rn from stktrade where sid='000651'),
t2 as (select *,0 rise from t1 where rn=1
union all
select t1.*, if(t1.close>t2.close,t2.rise+1,0) from t1 join t2 on t1.rn=t2.rn+1)
select max(rise) from t2;
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query@x("select * from stktrade where sid='000651'order by tdate") |
3 | =a=0,A2.max(a=if(close>close[-1],a+1,0)) |
A2: 按交易日期升序排序
A3: 循环计算 a,若收盘价比上一交易日收盘价高则加 1,否则重新置为 0,然后求每条记录算出来的 a 的最大值
3、 求信息发展 (300469)2018 年 2 月 14 日距历史最高收盘价跌幅
MySQL8:
select 1-t2.close/t1.close fall
from (select max(close) close from stktrade where sid='300469') t1,
(select close from stktrade where sid='300469' and tdate='2018-02-14') t2;
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query@x("select * from stktrade where sid='300469'order by tdate") |
3 | =A2.top@1(1,(if(tdate==date("2018-02-14"),A4=close),-close)) |
4 | =1+@/A3 |
A3: 在循环计算A2中-close最小值(即close最大值)的过程中,将2018年2月14日收盘价close设到A4
A5: @表示本格格值
4、 求信息发展 (300469)2018 年 1 月 1 日到 10 日每天累积成交量
MySQL8:
select tdate,volume,sum(volume) over(order by tdate) cum
from stktrade
where sid='300469' and tdate between '2018-01-01' and '2018-01-10';
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query@x("select tdate,volume,0 cum from stktrade where sid='300469'and tdate between '2018-01-01'and'2018-01-10'order by tdate") |
3 | =A2.run(cum=cum[-1]+volume) |
A3: 针对A2中每条记录,将volume列重新赋值为上条记录的cum列和本条记录的volume列之和,最后返回A2
5、 从 2018 年 1 月 1 日起信息发展 (300469) 经过多少交易日总成交量达到 1000000 股
MySQL8:
with t as (select row_number() over(order by tdate) rn,
sum(volume) over(order by tdate) cum
from stktrade
where sid='300469' and tdate>='2018-01-01')
select min(rn) from t where cum>=1000000;
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query@x("select tdate,volume from stktrade where sid='300469'and tdate>='2018-01-01' order by tdate") |
3 | =A2.iterate((@+=volume,~~+1),0,@>1000000) |
A3: A.iterate(x,a,c)相当于变量~~初始赋值为a,然后对A中成员循环,每次将x的计算结果赋给~~,再判断c是否为真,若真则继续循环,否则返回~~。@表示本格格值,在此用作中间变量。
6、 重叠部分不重复计数时求多个时间段包含的总天数
MySQL8:
with tt(start,end) as (select date'2010-01-07',date'2010-01-9'
union all select date'2010-01-15',date'2010-01-16'
union all select date'2010-01-07',date'2010-01-12'
union all select date'2010-01-08',date'2010-01-11'),
t as (select * from tt order by start),
tmp as (
select t.start, t.end, @m:=if(@m>@p,@m,@p) m,@p:=end,
case when @m>end then 0 when @m
from t,(select @m:=date'1970-01-01',@p:=@m) s
)
select sum(days) from tmp;
说明:@m为本记录以前的结束日期最大值,@p为本记录结束日期, days为本记录自以前最大结束日期后经过的天数。
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query@x("select date'2010-01-07'start,date'2010-01-9'end union all select date'2010-01-15',date'2010-01-16'union all select date'2010-01-07',date'2010-01-12'union all select date'2010-01-08',date'2010-01-11'") |
3 | =A2.sort(start) |
4 |
=A3.iterate((@=max(@, end[-1]), ~~ + if(@>=end:0, @ |
A4: A.iterate函数无第3个参数表示循环A中所有成员
7、 列出信息发展 (300469) 和招商银行 (600036) 从 2018 年 6 月 11 日到 15 日的交易信息及累积换手率
MySQL8:
with k as (select sid,circulation,tdate start,lead(tdate,1, date_add(now(),interval 1 day))over(partition by sid order by tdate) end
from stocks)
select t.*, k.circulation circ, sum(t.volume/k.circulation/10000) over(partition by sid order by tdate) rate
from stktrade t join k on t.sid=k.sid and t.tdate>=k.start and t.tdate
where t.sid in ('300469','600036') and t.tdate between '2018-06-11' and '2018-06-15';
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query("select * from stocks where sid in ('600036','300469') order by sid,tdate") |
3 | =A1.query@x("select * from stktrade where sid in ('600036','300469') and tdate between '2018-06-11'and'2018-06-15'order by sid,tdate") |
4 | =A3.derive((p=A2.pselect@bs(sid:A3.sid,tdate:A3.tdate), p=if(p<0,-p-1,p), A2(p).circulation):circ, iterate(~~+volume/circ/10000,0;sid):rate) |
A2: 流通股本信息按股票代码和日期排序
A3: 交易信息按股票代码和日期排序
A4: 先用A2.pselect@bs(sid:A3.sid,tdate:A3.tdate)查找对应日期的流通股本,若找到则返回行号,否则返回-插入位置,然后用p=if(p<0,-p-1,p)计算出当前交易日对应的流通股本在A2中行号,最后取出流通股本并赋值给circ列;在循环函数中,iterate(x,a;G)在初始或G发生变化时将a赋值给变量~~,然后将x的计算结果赋给~~。
8、 列出招商银行 (600036)2018 年 1 月 1 日到 10 日每天的 20 日收盘均价
MySQL8:
with t as (select *,row_number() over(order by tdate) rn from stktrade where sid='600036'),
t1 as (select * from t where tdate between '2018-01-01' and '2018-01-10')
select t1.tdate, t1.close, avg(t.close) ma20
from t1 join t on t.rn between t1.rn-19 and t1.rn
group by t1.tdate;
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query@x("select tdate,close from stktrade where sid='600036'order by tdate") |
3 | =A2.pselect@a(tdate>=date("2018-01-01") && tdate<=date("2018-01-10")) |
4 | =A2(A3).derive(A2.calc(A3(#),avg(close[-19:0])):ma20) |
A3: 查找所有符合的记录在A2中的行号
A4: A2(A3)根据A3里的行号从A2中取出对应的记录,然后再派生出新记录,新记录复制原记录的字段及值,并增加一列ma20,其值为A2中原记录的20日收盘均价
9、 列出官方语言最多的国家的名称、人口、元首及官方语言数
MySQL8:
select Name, Population, HeadOfState, top.Num
from world.country
join (
select countrycode, count(*) as num
from world.countrylanguage
where isofficial='T'
group by countrycode
having num = (
select max(summary.n)
from (
select countrycode, count(*) as n
from world.countrylanguage
where isofficial='T'
group by countrycode
) as summary
)
) as top on country.code=top.countrycode;
集算器SPL:
A | |
1 | =connect("mysql") |
2 | =A1.query("select * from world.country") |
3 | =A1.query@x("select * from world.countrylanguage where isofficial='T'") |
4 | =A3.group(CountryCode).maxp@a(~.len()) |
5 | =A4.news(A2.select(Code:CountryCode);Name,Population,HeadOfState,A4.~.len():Num) |
A4: 将将各国语言按 CountryCode 分组,然后取出成员数最多的所有组
A5: A4.news对 A4 中每组循环,每组先在 A2 查找对应的国家记录,然后再构造新记录,Num 字段赋值为 A4 中当前组的成员组