Decanter Centrifuge Supplier

Introduction:

LW series, widely used in solid control system for drilling mud, mainly operates the drilling fluid solid-liquid separation, dislodging the detrimental detrital material of drilling muds, so as to make sure the security , recycle the precious weighting materials such as barite etc and reduce the cost of mud fluid. 

Technical advantages:

A flow controller for adjusting and controlling the feed quantity of the centrifuge 
A main bearing seat of the centrifuge used for drilling fluid solid-control system 
A discharge accelerator for the screw conveyer of the centrifuge 
A fluid discharge port of the centrifuge used of drilling fluid solids control system 
Main engine foundation of the centrifuge 
Elevated hanging basket of the centrifuge 
Centrifuge(the centrifuge for drilling fluid separation) 

Technical parameters:

LW450×1000 Series Centrifuge 

Technical performance		unit	Rated freq. LW450×1000-N					Variable freq. LW450×1000BP-N
			N1	N2			N3
Diameter of bowl		mm	450
Active length of bowl		mm	1000
Max. rotation speed of bowl		r/min	2500
Active rotation speed of bowl		r/min	1800	2000			2200	≤2200
G-force			815	1007			1219	≤1219
Max. throughput(specific gravity＜1.1g/cm3		m3/h	40	45 to 50				50 to 60
Main Motor	Model		YB200L-4	YB225S-4				YB200L-4
	Rated power	kw	30	37				30
	Rated speed	r/min	1470	1480
Back Motor	Model		YB160M-6
	Rated power	kW	7.5
	Rated speed	r/min	970
Model of feed pump: centrifugal pump LSB2×3, SB2×3or screw pump
Overall dimension (length*width*height)		mm	2750×1580×1720(YB200L-4) 2750×1580×1780(YB225S-4)
Overall weight (including feed pump)		kg	3400		3500	4000 Including control cabinet