Drilling Fluids Decanting Centrifuges

Introduction:

LW series centrifuge, widely used in solid control system for drilling mud, mainly operates the drilling fluid solid-liquid separation, dislodging the detrimental detrital material of drilling muds, so as to make sure the security , recycle the precious weighting materials such as barite etc and reduce the cost of mud fluid. 

Technical advantages:

A flow controller for adjusting and controlling the feed quantity of the centrifuge 
A main bearing seat of the centrifuge used for drilling fluid solid-control system 
A discharge accelerator for the screw conveyer of the centrifuge 
A fluid discharge port of the centrifuge used of drilling fluid solids control system 
Main engine foundation of the centrifuge 
Elevated hanging basket of the centrifuge 
Centrifuge(the centrifuge for drilling fluid separation) 

Technical parameters:

LW520 Series Centrifuge 

Technical performance		unit	Rated freq. LW520×1320/1924-N			Variable freq. LW520×1320/1924BP-N
			N1	N2	N3
Diameter of bowl		mm	520
Active length of bowl		mm	1320/1924
Max. rotation speed of bowl		r/min	2800	2800	2800	≤3000
Active rotation speed of bowl		r/min	2800	2800	2800	1200～2800Adjustable
G-force			1537	1817	2119	≤2279
Max. throughput(specific gravity ＜1.1g/cm3		m3/h	50～60	55～65		60～70 Adjustable
Main Motor	Model		YB250M-4	YB250M-4/YB280S-4
	Rated power	kw	55	55/75
	Rated speed	r/min	1480	1480
Back Motor	Model		YB160L-6	YB160L-6 /YB180L-6
	Rated power	kw	11	11/15
	Rated speed	r/min	970
Model of feed pump: centrifugal pump LSB2×3, SB2×3or screw pump
Overall dimension (length*width*height)		mm	3300/3800×1708×1760(YB250M-4) 3300/3800×1708×1820 (YB280S-4)
Overall weight (including feed pump)		kg	4000/5200	4600/5800 Including control cabinet