Chinaunix首页 | 论坛 | 博客
  • 博客访问: 345860
  • 博文数量: 464
  • 博客积分: 13586
  • 博客等级: 上将
  • 技术积分: 4800
  • 用 户 组: 普通用户
  • 注册时间: 2012-04-02 10:25
文章分类
文章存档

2012年(464)

我的朋友

分类: Delphi

2012-06-14 10:38:47

Bimetallic composite technology develop rapidly

 When the wear-resistant alloy cost is higher, you can also reduce costs. In recent years, bimetallic composite technology has developed rapidly.
    (L) Methods of production. ① Casting process method. Precast blocks are to be placed in advance in the mold cavity, and then revert to type cavity poured another metal material; ② Double liquid metal method. That under certain conditions, two different liquid metal has cast into the same mold; ③ Middle partition of the casting method. Inserted in the mold the middle of a low-carbon steel plate, then poured into the liquid metal on both sides at the same time; ④ An imitation of ecology "teeth and gums" design principle, the new bi-metallic composite wear jaw plate.
  (2) Application example
  (A) The board of the Tangshan Engineering College, Hebei University developed the bi-metallic composite jaw, face material for the high chromium cast iron, the support plate of the tooth plate material for manganese steel. Test materials as granite, for the PE -250 mm x400 mm, , two times the service life of high-manganese steel jaw plates; broken and soft materials, service life is 5-7 times of high manganese steel jaw plates.
  (B) The Wuhan Mining Machinery Plant developed PE -250 mm x400 mm, jaw crusher bimetallic composite jaw plate, life is 2 to 3 times of high manganese steel.
   The test results can be seen: ① Cone crusher liner will withstand the tremendous impact load in the broken ore to produce a good work-hardening effect. The liner surface hardness HB is up to 500 or more, the hardening depth under 2 mm. Therefore, it requires  the liner is good in toughness and sufficient in strength to resist the enormous impact load and fragmentation; ② Different parts of the same liner surface hardening value is not the same, which indicates that the lining in different parts suffer uneven force  and the sizes of ore are also different. The upper part (head) of moving lining will bear the biggest impact of lump ores, thus hardening value is the highest; The impact force on lower part of the (big) moving lining is relatively weak, so the surface hardening value is low.
Taking in high end technology all round the world, Zhengzhou Red Star Company takes a relatively large market share in domestic machinery market. He persist on independent innovation by combinating research and production, and launched  1200 type and 1500 type double-chamber crusher, which compensates the blank domestic market of middle type and small type tertiary crushers, and which can be also seen in reports in many foreign coutries.
 

阅读(183) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~