Chinaunix首页 | 论坛 | 博客
  • 博客访问: 651586
  • 博文数量: 128
  • 博客积分: 4385
  • 博客等级: 上校
  • 技术积分: 1546
  • 用 户 组: 普通用户
  • 注册时间: 2010-07-22 14:05
文章分类

全部博文(128)

文章存档

2012年(2)

2011年(51)

2010年(75)

分类: 嵌入式

2011-07-20 15:34:35

%E4%BD%BF%E7%94%A8%E4%BB%8B%E7%BB%8D

Linux下的Minicom的功能与Windows下的超级终端功能相似,可以通过串口控制外部的硬件
设备.适于在linux通过超级终端对嵌入式设备行管理.同样也可以使用minicom对外置Modem
进行控制.

GTES 10,10.5,11版本都包含minicom包,你可以直接安装他们:

# rpm -ivh minicom-xxx.rpm

源码包下载地址:

minicom/

安装源码包:

# tar zxf minicom-2.2.tar.gz
# cd minicom-2.2
# ./configure
# make
# make install

第一次运行minicom,需要进行minicom的设置:

# minicom -s

┌─────[configuration]──────┐
│ Filenames and paths │
│ File transfer protocols │
│ Serial port setup │
│ Modem and dialing │
│ Screen and keyboard │
│ Save setup as dfl │
│ Save setup as.. │
│ Exit │
│ Exit from Minicom
└──────────────────────────┘


A — Serial Device : /dev/ttyS0

B — lockfile Location : /var/lock

C — Calling Program :

D — Callout Program:

E — Bps/par/Bits : 9600 8N1

F — Hardware Flow Control : YES

G — Software Flow Control : NO

Change with setting?

将选项A的值设置为/dev/ttyS0 表示是串口1.
将选项E的值设置为9600.

初始化设置中可以设置默认上传/下载的目录,传输协议参数,串口波特率等.设置完成后,
选择”Save setup as dfl”,保存为默认设置.然后选择”Exit”,按Ctrl-A,再按z,
即可进入Minicom的主界面.

Welco┌───────────────────────────────────────────────────────────────────┐
Minicom Command Summary │
OPTIO│ │
Compi│ Commands can be called by CTRL-A
│ │
Press│ Main Functions Other Functions │
│ │
│ Dialing directory..D run script (Go)....G | Clear Screen.......C │
│ Send files.........S Receive files......R | cOnfigure Minicom..O │
│ comm Parameters....P Add linefeed.......A | Suspend minicom....J │
│ Capture on/off.....L Hangup.............H | eXit and reset.....X │
│ send break.........F initialize Modem...M | Quit with no reset.Q │
│ Terminal settings..T run Kermit.........K | Cursor key mode....I │
│ lineWrap on/off....W local Echo on/off..E | Help screen........Z │
│ | scroll Back........B │
│ │
│ Select function or press Enter for none. │
│ │
│ Written by Miquel van Smoorenburg 1991-1995 │
│ Some additions by Jukka Lahtinen 1997-2000 │
│ i18n by Arnaldo Carvalho de Melo 1998 │
└───────────────────────────────────────────────────────────────────┘
CTRL-A Z for help | 38400 8N1 | NOR | Minicom 2.00.0 | VT102 | Offline

可以按快捷键进入相应的菜单.

调试北电ALTEON 180E设备示例.

Welcome to minicom 2.00.0
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
Compiled on Mar 7 2005, 10:29:09.

Press CTRL-A Z for help on special keys

Enter password:
Password incorrect.

Enter password:
System Information at 14:53:56 Fri Dec 15, 2006

Alteon 180e
sysName: 180e
sysLocation:
Switch is up 0 days, 0 hours, 8 minutes and 50 seconds.
Last boot: 14:45:06 Fri Dec 15, 2006 (power cycle)
MAC address: 00:60:cf:48:82:d0 IP (If 1) address: 0.0.0.0
Hardware Revision: A
Hardware Part No: E09_5B-B_7B-A
Software Version 10.0.25-SSH (FLASH image1), active configuration.
*****DNS Load Balancing*****
------------------------------------------------------------
[Main Menu]
info - Information Menu
stats - Statistics Menu
cfg - Configuration Menu
oper - Operations Command Menu
boot - Boot Options Menu
maint - Maintenance Menu
diff - Show pending config changes [global command]
apply - Apply pending config changes [global command]
save - Save updated config to FLASH [global command]
revert - Revert pending or applied changes [global command]
exit - Exit [global command, always available]
阅读(4269) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~