键盘例子------场景漫游II
这一节里，我们再来看看上次的例子，这次我们讲使用高级的键盘控制。
在初始化那部分，我们有两个变量：deltaAngle和deltaMode。这些变量控制旋转和移动照相机。当为非0时，照相机执行一些动作，当为0时，照相机就不动，这两个变量的初始值是0，也就是说，照相机初始状态是不动的。
#include #include float angle=0.0,deltaAngle = 0.0,ratio;float x=0.0f,y=1.75f,z=5.0f;float lx=0.0f,ly=0.0f,lz=-1.0f;GLint snowman_display_list;int deltaMove = 0; void changeSize(int w, int h) { // Prevent a divide by zero, when window is too short // (you cant make a window of zero width). if(h == 0) h = 1; ratio = 1.0f * w / h; // 重置投影矩阵 glMatrixMode(GL_PROJECTION); glLoadIdentity(); // 设置视口大小。 glViewport(0, 0, w, h); // 设置可视空间 gluPerspective(45,ratio,1,1000); glMatrixMode(GL_MODELVIEW); glLoadIdentity(); gluLookAt(x, y, z, x + lx,y + ly,z + lz, 0.0f,1.0f,0.0f); } void drawSnowMan() { glColor3f(1.0f, 1.0f, 1.0f);// Draw Body glTranslatef(0.0f ,0.75f, 0.0f); glutSolidSphere(0.75f,20,20); // Draw Head glTranslatef(0.0f, 1.0f, 0.0f); glutSolidSphere(0.25f,20,20); // Draw Eyes glPushMatrix(); glColor3f(0.0f,0.0f,0.0f); glTranslatef(0.05f, 0.10f, 0.18f); glutSolidSphere(0.05f,10,10); glTranslatef(-0.1f, 0.0f, 0.0f); glutSolidSphere(0.05f,10,10); glPopMatrix(); // Draw Nose glColor3f(1.0f, 0.5f , 0.5f); glRotatef(0.0f,1.0f, 0.0f, 0.0f); glutSolidCone(0.08f,0.5f,10,2);} GLuint createDL() { //返回一个显示列表 GLuint snowManDL; // Create the id for the list snowManDL = glGenLists(1); // start list glNewList(snowManDL,GL_COMPILE); // call the function that contains // the rendering commands drawSnowMan(); // endList glEndList(); return(snowManDL);} void initScene() { glEnable(GL_DEPTH_TEST); snowman_display_list = createDL(); } void orientMe(float ang) { lx = sin(ang); lz = -cos(ang); glLoadIdentity(); gluLookAt(x, y, z, x + lx,y + ly,z + lz, 0.0f,1.0f,0.0f);} void moveMeFlat(int i) { x = x + i*(lx)*0.1; z = z + i*(lz)*0.1; glLoadIdentity(); gluLookAt(x, y, z, x + lx,y + ly,z + lz, 0.0f,1.0f,0.0f);}下面的代码和以前的有些不同了。下面这个函数最开始，检查我们定义的那两个变量是否为0，如果不为0就调用相应的函数，来控制照相机的移动，和旋转。void renderScene(void) { if (deltaMove) moveMeFlat(deltaMove); if (deltaAngle) { angle += deltaAngle; orientMe(angle); } glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);// Draw ground glColor3f(0.9f, 0.9f, 0.9f); glBegin(GL_QUADS); glVertex3f(-100.0f, 0.0f, -100.0f); glVertex3f(-100.0f, 0.0f, 100.0f); glVertex3f( 100.0f, 0.0f, 100.0f); glVertex3f( 100.0f, 0.0f, -100.0f); glEnd();// Draw 36 SnowMen for(int i = -3; i < 3; i++) for(int j=-3; j < 3; j++) { glPushMatrix(); glTranslatef(i*10.0,0,j * 10.0); glCallList(snowman_display_list);; glPopMatrix(); } glutSwapBuffers();}下面的函数，分别是我们注册的特殊键控制的回调函数，和键的释放（键的松开）。void pressKey(int key, int x, int y) { switch (key) { case GLUT_KEY_LEFT : deltaAngle = -0.01f;break; case GLUT_KEY_RIGHT : deltaAngle = 0.01f;break; case GLUT_KEY_UP : deltaMove = 1;break; case GLUT_KEY_DOWN : deltaMove = -1;break; }} void releaseKey(int key, int x, int y) { switch (key) { case GLUT_KEY_LEFT : case GLUT_KEY_RIGHT : deltaAngle = 0.0f;break; case GLUT_KEY_UP : case GLUT_KEY_DOWN : deltaMove = 0;break; }}Main函数里，有三行新的代码行。 glutIgnoreKeyRepeat函数，传递了一个非0值告诉GLUT不发送keyborad repeat消息，然后，glutSpecialUpFunc和glutKeyboardUpFunc调用注册的回调函数。 int main(int argc, char **argv){ glutInit(&argc, argv); glutInitDisplayMode(GLUT_DEPTH | GLUT_DOUBLE | GLUT_RGBA); glutInitWindowPosition(100,100); glutInitWindowSize(640,360); glutCreateWindow("SnowMen from 3D-Tech"); initScene(); glutIgnoreKeyRepeat(1); glutSpecialFunc(pressKey); glutSpecialUpFunc(releaseKey); glutDisplayFunc(renderScene); glutIdleFunc(renderScene); glutReshapeFunc(changeSize); glutMainLoop(); return(0);}可以在这里下载这节的VC6.0工程（glut7.zip）。还可以自己改下照相机设置的函数。 （原文地址：）
阅读(1791) | 评论(0) | 转发(1) |
