全部博文(395)
| 标题 | 阅读 | 评论 | 转发 | 发布日期 | |
|---|---|---|---|---|---|
| linux 启动脚本 | 1314 | 0 | 1 | 2012-02-21 | |
| linux /proc/devices 和 /dev区别 | 3405 | 0 | 3 | 2012-02-21 | |
| 【推荐】 嵌入式Linux内核模块的配置与编译 | 9220 | 0 | 0 | 2012-02-20 | |
| 硬中断 软中断 | 3786 | 0 | 1 | 2012-02-20 | |
| Hello World 模块以及对应的内核makefile详解 | 8237 | 0 | 2 | 2012-02-20 | |
| VMware Run in background | 2556 | 0 | 0 | 2012-02-20 | |
| ioctl 传输大数据量 | 5448 | 0 | 1 | 2012-02-18 | |
| 使用pthread_mutex_t锁 | 3245 | 0 | 1 | 2012-02-18 | |
| 使用vmware 安装ghost xp出错的解决办法 | 2742 | 0 | 0 | 2012-02-18 | |
| linux 和vxworks ifconfig配置mac地址 | 5435 | 0 | 0 | 2012-02-15 | |
| linux 内核 栈空间 大小限制 | 6418 | 0 | 1 | 2012-02-15 | |
| 【推荐】 volatile和不加volatile的区别 | 2805 | 0 | 4 | 2012-02-08 | |
| ./**.sh与./XXX/**.sh区别 | 991 | 0 | 0 | 2012-02-08 | |
| linux 配置nfs 服务 | 941 | 0 | 1 | 2012-02-07 | |
| 淘宝开店 向银行打钱如何查看 | 1475 | 0 | 0 | 2012-02-05 | |
| 信号量的理解 | 1427 | 0 | 0 | 2012-01-12 | |
| 内核模块makefile精简版(x86) | 2368 | 0 | 0 | 2011-11-27 | |
| 青年学子的出路与FPGA芯片应用开发 | 2626 | 0 | 0 | 2011-11-23 | |
| 名人的作为 | 1420 | 0 | 0 | 2011-11-22 | |
| 发工资 | 1546 | 2 | 0 | 2011-11-16 |
hangxing782011-10-04 16:48
对于博文重写ads设置,axd连调,jlink-v8设置,驱动安装等
你好,我的AXD LOG的确出现
ARM RDI 1.5.1 -> ASYNC RDI Protocol Converter ADS v1.2 [Build number 805]. Copyright (c) ARM Limited 2001.
SEGGER J-Link RDI DLL V4.08l, compiled Sep 17 2009 09:42:38
SEGGER J-Link ARM DLL V4.08l, compiled Sep 17 2009 09:41:55
Firmware: J-Link ARM V8 compiled Dec 1 2009 11:42:48
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
VTarget = 3.267V
Found 1 JTAG device, Total IRLen = 4:
Id of device #1: 0x0032409D
Found ARM with core Id 0x0032409D (ARM9)
但为什么target的内核却是
ARM79_0呢而不是ARM920T