全部博文(395)
标题 | 阅读 | 评论 | 转发 | 发布日期 | |
---|---|---|---|---|---|
各种参考文档 | 1362 | 0 | 0 | 2011-08-04 | |
【推荐】 经典makefile例子 | 16885 | 2 | 16 | 2011-08-04 | |
makefile 缺省规则 | 1569 | 0 | 0 | 2011-08-04 | |
makefile的内置规则 | 1262 | 0 | 0 | 2011-07-26 | |
makefile中的预定义变量CFLAGS CCFLAGS问题 | 13836 | 0 | 0 | 2011-07-23 | |
关于MAKEfile和环境变量的使用1 | 16685 | 1 | 3 | 2011-07-23 | |
make的自动变量和预定义变量 | 3475 | 0 | 0 | 2011-07-23 | |
makefile 练习一 | 1516 | 0 | 1 | 2011-07-22 |
hangxing782011-10-04 16:48
对于博文重写ads设置,axd连调,jlink-v8设置,驱动安装等
你好,我的AXD LOG的确出现
ARM RDI 1.5.1 -> ASYNC RDI Protocol Converter ADS v1.2 [Build number 805]. Copyright (c) ARM Limited 2001.
SEGGER J-Link RDI DLL V4.08l, compiled Sep 17 2009 09:42:38
SEGGER J-Link ARM DLL V4.08l, compiled Sep 17 2009 09:41:55
Firmware: J-Link ARM V8 compiled Dec 1 2009 11:42:48
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
VTarget = 3.267V
Found 1 JTAG device, Total IRLen = 4:
Id of device #1: 0x0032409D
Found ARM with core Id 0x0032409D (ARM9)
但为什么target的内核却是
ARM79_0呢而不是ARM920T