Chinaunix首页 | 论坛 | 博客
  • 博客访问: 4729964
  • 博文数量: 930
  • 博客积分: 12070
  • 博客等级: 上将
  • 技术积分: 11448
  • 用 户 组: 普通用户
  • 注册时间: 2008-08-15 16:57
文章分类

全部博文(930)

文章存档

2011年(60)

2010年(220)

2009年(371)

2008年(279)

分类: LINUX

2008-11-24 16:44:57

使用 ubuntu 已经有两个星期了, 才忽然发现原来一直都没有安装防火墙, 赶紧去找些资料看看, 下面给出我自己的 iptables 设置, 供和我一样新来的兄弟们参考,水平有限,多多指教。(对于防火墙的设置,有两种策略:一种是全部通讯口都允许使用,只是阻止一些我们知道的不安全的或者容 易被利用的口;另外一种,则是先屏蔽所有的通讯口,而只是允许我们需要使用的通讯端口。这里使用的是第二种原则,如果你需要开启其他端口,请先参考计算机 通讯口说明,然后自己添加。)
代码:
#删除原来 iptables 里面已经有的规则
iptables -F
iptables -X

#抛弃所有不符合三种链规则的数据包
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP

#设置:本地进程 lo  的 INPUT 和 OUTPUT 链接 ; eth1的 INPUT链
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -i eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -i eth1 -m state --state NEW,INVALID -j LOG
iptables -A OUTPUT -o lo -j ACCEPT

#对其他主要允许的端口的 OUTPUT设置:
# DNS
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 53 -j ACCEPT
iptables -A OUTPUT -o eth1 -p UDP --sport 1024:65535 --dport 53 -j ACCEPT

#HTTP
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 80 -j ACCEPT

#HTTPS
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 443 -j ACCEPT

#Email 接受 和发送
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 110 -j ACCEPT
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 25 -j ACCEPT

# FTP 数据和控制
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 20 -j ACCEPT
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 21 -j ACCEPT

#DHCP
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 68 -j ACCEPT
iptables -A OUTPUT -o eth1 -p UDP --sport 1024:65535 --dport 68 -j ACCEPT

#POP3S Email安全接收
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 995 -j ACCEPT

#时间同步服务器 NTP
iptables -A OUTPUT -o eth1 -p TCP --sport 1024:65535 --dport 123 -j ACCEPT

#拒绝 eth1 其他剩下的
iptables -A OUTPUT -o eth1 --match state --state NEW,INVALID -j LOG


最后是有关于iptables存储的命令:
代码:
iptables-save > /etc/iptables.up.rule # 存在你想存的地方

代码:
iptables-restore < /etc/iptables.up.rules #调用


因为iptables 在每次机器重新启动以后,需要再次输入或者调用,为了方便操作,使用
代码:
sudo gedit /etc/network/interfaces


代码:
auto ath0
       iface ath0 inet dhcp
后面加上
代码:
pre-up iptables-restore < /etc/iptables.up.rules #启动自动调用已存储的iptables

代码:
post-down iptables-save > /etc/iptables.up.rule #关机时,把当前iptables 储存
阅读(5613) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~