linux下挂载NTFS文件系统

呵呵,linux默认核心是不支持NTFS文件系统的.很遗憾噢,我们可以通过编译内核加载NTFS支持或者安装插件搞定,对于我这个大菜鸟来说编译内似乎苛刻了 点,呵呵~~~那我们选安装插件吧 .在网上搜索N次后终于找到了插件.嘿嘿~~~~~哥几个有的玩了.嘿嘿~



下载相应版本即可~~~
安装过程很快,大概几秒就好了.^_^好了.那我们可以加载分区了
呵呵,那我们得先了解分区情况,来确定我们该加载哪个.呵呵~~命令效果如下
================================================
[root@localhost ~]# fdisk -l

Disk /dev/hda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        1913    15366141    7  HPFS/NTFS
/dev/hda2            1914       19457   140922180    f  W95 Ext'd (LBA)
/dev/hda5            1914        2884     7799526    7  HPFS/NTFS
/dev/hda6            2885        2897      104391   83  Linux
/dev/hda7            2898       11553    69529288+  83  Linux
/dev/hda8           11554       14103    20482843+  83  Linux
/dev/hda9           14104       16015    15358108+  83  Linux
/dev/hda10          16016       17927    15358108+  83  Linux
/dev/hda11          17928       19202    10241406   83  Linux
/dev/hda12          19203       19457     2048256   82  Linux swap / Solaris

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        2081    16715601    c  W95 FAT32 (LBA)
/dev/sda2            2082        9729    61432560    f  W95 Ext'd (LBA)
/dev/sda5            2082        9729    61432528+   7  HPFS/NTFS

--------------------------------------------------------------------------------------------------------------------------------

LABEL=/                 /                       ext3    defaults        1 1
LABEL=/var              /var                    ext3    defaults        1 2
LABEL=/opt              /opt                    ext3    defaults        1 2
LABEL=/usr              /usr                    ext3    defaults        1 2
LABEL=/home1            /home                   ext3    defaults        1 2
LABEL=/boot1            /boot                   ext3    defaults        1 2
tmpfs                   /dev/shm                tmpfs   defaults        0 0
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
sysfs                   /sys                    sysfs   defaults        0 0
proc                    /proc                   proc    defaults        0 0
LABEL=SWAP-hda12        swap                    swap    defaults        0 0
/dev/hda1                /mnt/winc                ntfs utf8,umask=0222   0 0
/dev/hda5                /mnt/wine                ntfs utf8,umask=0222   0 0
/dev/sda1                /mnt/wind                vfat utf8,umask=0000 0 0
/dev/sda5                /mnt/winf                ntfs utf8,umask=0222   0 0
/dev/hdd                 /media/cdrecorder        auto     pamconsole,fscontext=system_u:object_r:removable_t,ro,exec,noauto,managed 0 0
/dev/hdc                 /media/cdrom             auto     pamconsole,fscontext=system_u:object_r:removable_t,ro,exec,noauto,managed 0 0

-------------------------------------------------------------------------------------------------------------------------------

.修改好了以后 我们保存.
然后用

mkdir /mnt/winc
mkdir /mnt/wind
mkdir /mnt/wine
mkdir /mnt/winf
在/mnt下建立 winc.....winf目录.用来访问
然后回到终端,然后mount -a一下,如果没有任何提示,说明OK了.
然后我们就能访问NTFS分区了!