Cache battery is near its end of life, it should be replaced SOON. Run frutil-
to replace.
HSG80_1_A> show this full
Controller:
HSG80 ZG10707861 Software V86F-9, Hardware E12
NODE_ID = 5000-1FE1-0010-1E20
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for dual-redundancy with ZG10707297
In dual-redundant configuration
Device Port SCSI address 7
Time: 21-MAR-2007 23:17:02
Command Console LUN is lun 0 (NOIDENTIFIER)
Host PORT_1:
Reported PORT_ID = 5000-1FE1-0010-1E21
PORT_1_TOPOLOGY = FABRIC (fabric up)
Address = 011100
Host PORT_2:
Reported PORT_ID = 5000-1FE1-0010-1E22
PORT_2_TOPOLOGY = FABRIC (standby)
NOREMOTE_COPY
Cache:
512 megabyte write cache, version 0022
Cache is GOOD
Unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
Mirrored Cache:
Not enabled
Battery:
UPS = DATACENTER_WIDE
Extended information:
Terminal speed 9600 baud, eight bit, no parity, 1 stop bit
Operation control: 00000000 Security state code: 41113
Configuration backup enabled on 36 devices
Cache battery is near its end of life, it should be replaced SOON. Run frutil-
to replace.
HSG80_1_A> show other full
Controller:
HSG80 ZG10707297 Software V86F-9, Hardware E12
NODE_ID = 5000-1FE1-0010-1E20
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for dual-redundancy with ZG10707861
In dual-redundant configuration
Device Port SCSI address 6
Time: 21-MAR-2007 23:17:11
Command Console LUN is lun 0 (NOIDENTIFIER)
Host PORT_1:
Reported PORT_ID = 5000-1FE1-0010-1E21
PORT_1_TOPOLOGY = FABRIC (standby)
Host PORT_2:
Reported PORT_ID = 5000-1FE1-0010-1E22
PORT_2_TOPOLOGY = FABRIC (fabric up)
Address = 011300
NOREMOTE_COPY
Cache:
512 megabyte write cache, version 0022
Cache is GOOD
No unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
Mirrored Cache:
Not enabled
Battery:
UPS = DATACENTER_WIDE
Extended information:
Terminal speed 9600 baud, eight bit, no parity, 1 stop bit
Operation control: 00000000 Security state code: 92795
Configuration backup enabled on 36 devices
Cache battery is near its end of life, it should be replaced SOON. Run frutil-
to replace.
HSG80_1_A> run frutil
Field Replacement Utility - version V86F
Do you intend to replace this controller's cache battery? Y/N [N] y
Completing outstanding battery work. Please wait.
Slot Designations
(front view)
+---+---+---+---+---+---+---+---+---+
| E | E | F | F | F | E | E | O | E |
| C | C | a | a | a | C | C | C | M |
| B | B | n | n | n | B | B | P | U |
| | | | | | | | | |
| B | B | | | | A | A | | |
+---+---+---+---+---+---+---+---+---+
If the batteries were replaced while the cabinet was powered down,
press return.
Otherwise, follow this procedure:
WARNING: Ensure that at least one battery is installed at all times
during this procedure.
1. Insert the new battery in the unused slot next to the old battery.
2. Remove the old battery.
3. Press return.
Updating this battery's expiration date and deep discharge history.
Field Replacement Utility terminated.
%CER--HSG80_1_A> --21-MAR-2007 23:17:26-- Cache battery is sufficiently charged
HSG80_1_A> set this noups
Warning 4020: A restart of both this and the other controller is required
before all the parameters modified will take effect
%CER--HSG80_1_A> --21-MAR-2007 23:17:42-- Restart of this controller required
%CER--HSG80_1_A> --21-MAR-2007 23:17:42-- Restart of the other controller-
required
Cache battery is sufficiently charged
Restart of this controller required
Restart of the other controller required
HSG80_1_A>
Copyright Compaq Computer Corporation 2001. All rights reserved.
HSG80 Software version V86F-9, Hardware version E12
Last fail code: 20090010
Press " ?" at any time for help.
Cache battery is near its end of life, it should be replaced SOON. Run frutil-
to replace.
Restart of this controller required
Restart of the other controller required
HSG80_1_B> run frutil
Field Replacement Utility - version V86F
Do you intend to replace this controller's cache battery? Y/N [N] y
Completing outstanding battery work. Please wait.
Slot Designations
(front view)
+---+---+---+---+---+---+---+---+---+
| E | E | F | F | F | E | E | O | E |
| C | C | a | a | a | C | C | C | M |
| B | B | n | n | n | B | B | P | U |
| | | | | | | | | |
| B | B | | | | A | A | | |
+---+---+---+---+---+---+---+---+---+
If the batteries were replaced while the cabinet was powered down,
press return.
Otherwise, follow this procedure:
WARNING: Ensure that at least one battery is installed at all times
during this procedure.
1. Insert the new battery in the unused slot next to the old battery.
2. Remove the old battery.
3. Press return.
Updating this battery's expiration date and deep discharge history.
Field Replacement Utility terminated.
Restart of this controller required
Restart of the other controller required
%CER--HSG80_1_B> --21-MAR-2007 23:18:25-- Cache battery is sufficiently charged
HSG80_1_B> set this noups
Restart of this controller required
Restart of the other controller required
Cache battery is sufficiently charged
HSG80_1_B> show this full
Controller:
HSG80 ZG10707297 Software V86F-9, Hardware E12
NODE_ID = 5000-1FE1-0010-1E20
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for dual-redundancy with ZG10707861
In dual-redundant configuration
Device Port SCSI address 6
Time: 21-MAR-2007 23:18:35
Command Console LUN is lun 0 (NOIDENTIFIER)
Host PORT_1:
Reported PORT_ID = 5000-1FE1-0010-1E21
PORT_1_TOPOLOGY = FABRIC (standby)
Host PORT_2:
Reported PORT_ID = 5000-1FE1-0010-1E22
PORT_2_TOPOLOGY = FABRIC (fabric up)
Address = 011300
NOREMOTE_COPY
Cache:
512 megabyte write cache, version 0022
Cache is GOOD
No unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
Mirrored Cache:
Not enabled
Battery:
NOUPS
FULLY CHARGED
Expires: 21-MAR-2009
Extended information:
Terminal speed 9600 baud, eight bit, no parity, 1 stop bit
Operation control: 00000000 Security state code: 92795
Configuration backup enabled on 36 devices
Restart of this controller required
Restart of the other controller required
Cache battery is sufficiently charged
HSG80_1_B> show other full
Controller:
HSG80 ZG10707861 Software V86F-9, Hardware E12
NODE_ID = 5000-1FE1-0010-1E20
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for dual-redundancy with ZG10707297
In dual-redundant configuration
Device Port SCSI address 7
Time: 21-MAR-2007 23:18:43
Command Console LUN is lun 0 (NOIDENTIFIER)
Host PORT_1:
Reported PORT_ID = 5000-1FE1-0010-1E21
PORT_1_TOPOLOGY = FABRIC (fabric up)
Address = 011100
Host PORT_2:
Reported PORT_ID = 5000-1FE1-0010-1E22
PORT_2_TOPOLOGY = FABRIC (standby)
NOREMOTE_COPY
Cache:
512 megabyte write cache, version 0022
Cache is GOOD
Unflushed data in cache
CACHE_FLUSH_TIMER = DEFAULT (10 seconds)
Mirrored Cache:
Not enabled
Battery:
NOUPS
FULLY CHARGED
Expires: 21-MAR-2009
Extended information:
Terminal speed 9600 baud, eight bit, no parity, 1 stop bit
Operation control: 00000000 Security state code: 41113
Configuration backup enabled on 36 devices
Restart of this controller required
Restart of the other controller required
Cache battery is sufficiently charged
阅读(2141) | 评论(0) | 转发(0) |
