Chinaunix首页 | 论坛 | 博客
  • 博客访问: 2384965
  • 博文数量: 328
  • 博客积分: 4302
  • 博客等级: 上校
  • 技术积分: 5486
  • 用 户 组: 普通用户
  • 注册时间: 2010-07-01 11:14
个人简介

悲剧,绝对的悲剧,悲剧中的悲剧。

文章分类

全部博文(328)

文章存档

2017年(6)

2016年(18)

2015年(28)

2014年(73)

2013年(62)

2012年(58)

2011年(55)

2010年(28)

分类: LINUX

2011-09-04 10:58:57

一、版本
通常的Linux发行版中都带有NetCat(简称nc),甚至在拯救模式光盘中也由busybox提供了 简版的nc工具。但不同的版本,其参数的使用略有差异。
NetCat 官方地址:

引用

[root@hatest1 ~]# cat /etc/asianux-release
Asianux release 2.0 (Trinity SP2)
[root@hatest1 ~]# cat /etc/redflag-release
Red Flag DC Server release 5.0 (Trinity SP2)
[root@hatest1 ~]# type -a nc
nc is /usr/bin/nc
[root@hatest1 ~]# rpm -q nc
nc-1.10-22
建议在使用前,先用man nc看看帮助。这里以红旗DC Server 5.0上的1.10版本进行简单说明。
假设两服务器信息:

引用

server1: 192.168.228.221
server2: 192.168.228.222


二、常见使用
1、远程拷贝文件
从server1拷贝文件到server2上。需要先在server2上,用nc激活监听,server2上运行:

引用

[root@hatest2 tmp]# nc -lp 1234 > install.log
server1上运行:

引用

[root@hatest1 ~]# ll install.log
-rw-r–r–   1 root root 39693 12月 20   2007 install.log
[root@hatest1 ~]# nc -w 1 192.168.228.222 1234 < install.log


2、克隆硬盘或分区
操作与上面的拷贝是雷同的,只需要由dd获得硬盘或分区的数据,然后传输即可。
克隆硬盘或分区的操作,不应在已经mount的的系统上进行。所以,需要使用安装光盘引导后,进入拯救模式(或使用工 具光盘)启动系统后,在server2上进行类似的监听动作:

# nc -l -p 1234 | dd of=/dev/sda

server1上执行传输,即可完成从server1克隆sda硬盘到server2的任务:

# dd if=/dev/sda | nc 192.168.228.222 1234

※ 完成上述工作的前提,是需要落实光盘的拯救模式支持服务器上的网卡,并正确配置IP。

3、端口扫描
可以执行:

引用

# nc -v -w 1 192.168.228.222 -z 1-1000
hatest2 [192.168.228.222] 22 (ssh) open


4、保存Web页面

# while true; do nc -l -p 80 -q 1 < somepage.html; done

5、模拟HTTP Headers

引用

[root@hatest1 ~]# nc  80
GET / HTTP/1.1
Host: ispconfig.org
Referrer: mypage.com
User-Agent: my-browser

HTTP/1.1 200 OK
Date: Tue, 16 Dec 2008 07:23:24 GMT
Server: Apache/2.2.6 (Unix) DAV/2 mod_mono/1.2.1 mod_python/3.2.8 Python/2.4.3 mod_perl/2.0.2 Perl/v5.8.8
Set-Cookie: PHPSESSID=bbadorbvie1gn037iih6lrdg50; path=/
Expires: 0
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Cache-Control: private, post-check=0, pre-check=0, max-age=0
Set-Cookie: oWn_sid=xRutAY; expires=Tue, 23-Dec-2008 07:23:24 GMT; path=/
Vary: Accept-Encoding
Transfer-Encoding: chunked
Content-Type: text/html
[......]
在nc命令后,输入红色部分的内容,然后按两次回车,即可从对方获得HTTP Headers内容。


6、聊天
nc还可以作为简单的字符下聊天工具使用,同样的,server2上需要启动监听:

[root@hatest2 tmp]# nc -lp 1234

server1上传输:

[root@hatest1 ~]# nc 192.168.228.222 1234

这样,双方就可以相互交流了。使用Ctrl+D正常退出。

7、传输目录
从server1拷贝nginx-0.6.34目录内容到server2上。需要先在server2上,用nc激活监听,server2上运行:

引用

[root@hatest2 tmp]# nc -l 1234 |tar xzvf -
server1上运行:

引用

[root@hatest1 ~]# ll -d nginx-0.6.34
drwxr-xr-x 8 1000 1000 4096 12-23 17:25 nginx-0.6.34
[root@hatest1 ~]# tar czvf – nginx-0.6.34|nc 192.168.228.222 1234


8、参数简介
这仅是一个1.10版本的简单说明,详细的参数使用还是需要看man:

引用

想要连接到某处: nc [-options] hostname port[s] [ports] …
绑定端口等待连接: nc -l -p port [-options] [hostname] [port]
参数:
-g gateway source-routing hop point[s], up to 8
-G num source-routing pointer: 4, 8, 12, …
-h 帮助信息
-i secs 延时的间隔
-l 监听模式,用于入站连接
-n 指定数字的IP地址,不能用hostname
-o file 记录16进制的传输
-p port 本地端口号
-r 任意指定本地及远程端口
-s addr 本地源地址
-u UDP模式
-v 详细输出——用两个-v可得到更详细的内容
-w secs timeout的时间
-z 将输入输出关掉——用于扫描时,其中端口号可以指定一个或者用lo-hi式的指定范围。

三、版本差异
不用系统上提供的nc版本会有说不同,其提供的参数使用方法也略有差异。
例如,红旗Asianux 3.0 SP1拯救光盘上的版本是供使用的参数仅有一部分:

引用

# nc -h
BusyBox v1.2.0 (2008.04.14-01:35+0000) multi-call binary

Usage: nc [OPTIONS] [IP] [port]

Netcat opens a pipe to IP:port

Options:
         -l               listen mode, for inbound connects
         -p PORT         local port number
         -i SECS         delay interval for lines sent
         -e PROG         program to exec after connect (dangerous!)
         -w SECS         timeout for connects and final net reads
而在Asianux 3.0 SP1系统中提供的nc版本则是1.84的,按上面的参数用法写会执行不了:

引用

[root@ftpserver ~]# rpm -q nc
nc-1.84-10
[root@ftpserver ~]# nc -lp 1234
usage: nc [-46DdhklnrStUuvzC] [-i interval] [-p source_port]
           [-s source_ip_address] [-T ToS] [-w timeout] [-X proxy_version]
           [-x proxy_address[:port]] [hostname] [port[s]]
讲查看man文档,可见在这个版本中,-l是不能与-s、-p、-z一起使用的,-w参数也会被忽略,所以,正确的用法是:

[root@ftpserver tmp]# nc -l 1234

四、用在脚本中
nc每次启动监听后,都会在客户端连接完成并退出的同时,服务端一同退出。所以,如果需要不断的使用nc进行数据传输,需要在脚本中使用循环。利用nc实 现更多的功能,可参考其rpm提供的参考脚本:

引用

# rpm -qd nc
/usr/share/doc/nc-1.10/Changelog
/usr/share/doc/nc-1.10/README
/usr/share/doc/nc-1.10/scripts/README
/usr/share/doc/nc-1.10/scripts/alta
/usr/share/doc/nc-1.10/scripts/bsh
/usr/share/doc/nc-1.10/scripts/dist.sh
/usr/share/doc/nc-1.10/scripts/irc
/usr/share/doc/nc-1.10/scripts/iscan
/usr/share/doc/nc-1.10/scripts/ncp
/usr/share/doc/nc-1.10/scripts/probe
/usr/share/doc/nc-1.10/scripts/web
/usr/share/doc/nc-1.10/scripts/webproxy
/usr/share/doc/nc-1.10/scripts/webrelay
/usr/share/doc/nc-1.10/scripts/websearch
/usr/share/man/man1/nc.1.gz

转自:

阅读(1846) | 评论(0) | 转发(1) |
给主人留下些什么吧!~~