U-Boot 2014.04 (Oct 31 2014 - 17:02:41) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Board: Cubietruck
I2C: ready
DRAM: 2 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: dwmac.1c50000
Hit any key to stop autoboot: 0
reading uEnv.txt
240 bytes read in 16 ms (14.6 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading uImage
2540384 bytes read in 293 ms (8.3 MiB/s)
reading dtb
23026 by黋.~恘j蛠(775.4 KiB/s)
## Booting kernel from Legacy Image at 46000000 ...
Image Name: ARM OpenWrt Linux-3.14.18
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2540320 Bytes = 2.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 49000000
Booting using the fdt blob at 0x49000000
Loading Kernel Image ... OK
Using Device Tree in place at 49000000, end 490089f1
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.18 (hades@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 svn-r173) ) #1 SMP PREEMPT Tue Nov 4 17:11:33 CST 2014
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Cubietech Cubietruck
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 7 pages/cpu @ee7d6000 s7104 r8192 d13376 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2074212K/2097152K available (3603K kernel code, 161K rwdata, 1016K rodata, 182K init, 602K bss, 22940K reserved, 1318912K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc048af04 (4620 kB)
[ 0.000000] .init : 0xc048b000 - 0xc04b8bc0 ( 183 kB)
[ 0.000000] .data : 0xc04ba000 - 0xc04e2660 ( 162 kB)
[ 0.000000] .bss : 0xc04e2660 - 0xc057921c ( 603 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000026] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
[ 0.000183] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
[ 0.000348] Console: colour dummy device 80x30
[ 0.000388] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
[ 0.060081] pid_max: default: 32768 minimum: 301
[ 0.060262] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.060275] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.065935] CPU: Testing write buffer coherency: ok
[ 0.066290] /cpus/cpu@0 missing clock-frequency property
[ 0.066310] /cpus/cpu@1 missing clock-frequency property
[ 0.066323] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.066352] Setting up static identity map for 0x400118a8 - 0x400118dc
[ 0.120548] CPU1: failed to boot: -38
[ 0.120576] Brought up 1 CPUs
[ 0.120583] SMP: Total of 1 processors activated.
[ 0.120590] CPU: All CPU(s) started in SVC mode.
[ 0.125355] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.125698] pinctrl core: initialized pinctrl subsystem
[ 0.126073] regulator-dummy: no parameters
[ 0.126393] NET: Registered protocol family 16
[ 0.126659] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.135947] bio: create slab at 0
[ 0.136589] reg-fixed-voltage ahci-5v.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
[ 0.136617] platform ahci-5v.3: Driver reg-fixed-voltage requests probe deferral
[ 0.136643] reg-fixed-voltage usb1-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[ 0.136658] platform usb1-vbus.4: Driver reg-fixed-voltage requests probe deferral
[ 0.136679] reg-fixed-voltage usb2-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
[ 0.136692] platform usb2-vbus.5: Driver reg-fixed-voltage requests probe deferral
[ 0.136716] reg-fixed-voltage vmmc3.7: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
[ 0.136729] platform vmmc3.7: Driver reg-fixed-voltage requests probe deferral
[ 0.137110] SCSI subsystem initialized
[ 0.137630] usbcore: registered new interface driver usbfs
[ 0.137693] usbcore: registered new interface driver hub
[ 0.137827] usbcore: registered new device driver usb
[ 0.137938] pps_core: LinuxPPS API ver. 1 registered
[ 0.137946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.137970] PTP clock support registered
[ 0.138843] Switched to clocksource timer
[ 0.140350] Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
[ 0.140371] Could not switch to high resolution mode on CPU 0
[ 0.145802] NET: Registered protocol family 2
[ 0.146796] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.146888] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.147010] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.147087] TCP: reno registered
[ 0.147107] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147162] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.147474] NET: Registered protocol family 1
[ 0.148785] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.148887] audit: initializing netlink subsys (disabled)
[ 0.148954] audit: type=2000 audit(0.130:1): initialized
[ 0.149537] bounce pool size: 64 pages
[ 0.157350] VFS: Disk quotas dquot_6.5.2
[ 0.157686] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.159593] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.159605] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.160547] msgmni has been set to 1475
[ 0.162408] io scheduler noop registered
[ 0.162425] io scheduler deadline registered
[ 0.162471] io scheduler cfq registered (default)
[ 0.162746] platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
[ 0.164996] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 0.206537] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.228811] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ 0.809714] console [ttyS0] enabled
[ 0.834128] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 35, base_baud = 1500000) is a U6_16550A
[ 0.844031] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
[ 0.852759] stmmaceth 1c50000.ethernet: no regulator found
[ 0.858300] stmmaceth 1c50000.ethernet: no reset control found
[ 0.864177] Ring mode enabled
[ 0.867232] No HW DMA feature register supported
[ 0.871767] Normal descriptors
[ 0.875089] TX Checksum insertion supported
[ 0.883514] libphy: stmmac: probed
[ 0.886927] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[ 0.893094] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01)
[ 0.898691] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.905255] ehci-platform: EHCI generic platform driver
[ 0.910705] platform 1c14000.usb: Driver ehci-platform requests probe deferral
[ 0.917999] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
[ 0.925445] usbcore: registered new interface driver usb-storage
[ 0.931790] mousedev: PS/2 mouse device common for all mice
[ 0.939015] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.947853] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
[ 0.953102] sunxi-mmc 1c0f000.mmc: base:0xf00f4000 irq:64
[ 0.958985] platform 1c12000.mmc: Driver sunxi-mmc requests probe deferral
[ 0.967157] sunxi-ss 1c15000.crypto-engine: Die ID 0
[ 0.973707] TCP: cubic registered
[ 0.977021] Initializing XFRM netlink socket
[ 0.981402] NET: Registered protocol family 17
[ 0.985948] 8021q: 802.1Q VLAN Support v1.8
[ 0.990225] Registering SWP/SWPB emulation handler
[ 0.995469] registered taskstats version 1
[ 0.999608] regulator-dummy: disabling
[ 1.003933] ahci-5v: 5000 mV
[ 1.007356] usb1-vbus: 5000 mV
[ 1.010924] usb2-vbus: 5000 mV
[ 1.014379] vmmc3: 3300 mV
[ 1.080367] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
[ 1.087855] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
[ 1.093771] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 1.102750] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
[ 1.113728] scsi0 : ahci_platform
[ 1.117395] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[ 1.125702] ehci-platform 1c14000.usb: EHCI Host Controller
[ 1.131460] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[ 1.139303] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000
[ 1.160351] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[ 1.166645] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.174478] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.181729] usb usb1: Product: EHCI Host Controller
[ 1.186623] usb usb1: Manufacturer: Linux 3.14.18 ehci_hcd
[ 1.192131] usb usb1: SerialNumber: 1c14000.usb
[ 1.197207] hub 1-0:1.0: USB hub found
[ 1.201045] hub 1-0:1.0: 1 port detected
[ 1.205610] ehci-platform 1c1c000.usb: EHCI Host Controller
[ 1.211244] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
[ 1.219079] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
[ 1.240328] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[ 1.246596] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.253398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260624] usb usb2: Product: EHCI Host Controller
[ 1.265498] usb usb2: Manufacturer: Linux 3.14.18 ehci_hcd
[ 1.272013] usb usb2: SerialNumber: 1c1c000.usb
[ 1.278065] hub 2-0:1.0: USB hub found
[ 1.281869] hub 2-0:1.0: 1 port detected
[ 1.286994] sunxi-mmc 1c12000.mmc: base:0xf0138000 irq:67
[ 1.367529] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 1.480338] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.500428] Waiting for root device /dev/mmcblk0p2...
[ 1.520369] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 1.570327] mmc0: new high speed SDHC card at address 1234
[ 1.576428] mmcblk0: mmc0:1234 SA08G 7.21 GiB
[ 1.582450] mmcblk0: p1 p2
[ 1.616497] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 1.623960] Freeing unused kernel memory: 180K (c048b000 - c04b8000)
[ 1.811476] usb 1-1: New USB device found, idVendor=148f, idProduct=5370
[ 1.857492] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.864696] usb 1-1: Product: 802.11 n WLAN
[ 1.868878] usb 1-1: Manufacturer: TPlink
[ 1.873961] usb 1-1: SerialNumber: 1.0
[ 1.877732] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
[ 1.937053] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.951337] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.995217] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.006439] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
procd: Console is alive
procd: - watchdog -
procd: - preinit -
[ 2.526016] mmc1: new high speed SDIO card at address 0001
probing /dev/mmcblk0 for uboot env data
Detected generic sunxi // generic sunxi
[ 2.662777] random: mktemp urandom read with 34 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
mounting /dev/root
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
BusyBox v1.22.1 (2014-10-31 17:16:37 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______________________________________________________________
| ____ _ ____ |
| | _ \ __ _ _ __ __| | ___ _ __ __ _| __ ) _____ __ |
| | |_) / _` | '_ \ / _` |/ _ \| '__/ _` | _ \ / _ \ \/ / |
| | __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) > < |
| |_| \__,_|_| |_|\__,_|\___/|_| \__,_|____/ \___/_/\_\ |
| |
| PabdoraBox SDK Plantform |
| Copyright 2013-2014 |
| D-Team Technology Co.,Ltd. ShenZhen |
|______________________________________________________________|
Base on OpenWrt BARRIER BREAKER (14.09, r193)
[root@(none):/]#[ 7.346685] NET: Registered protocol family 10
[ 7.374579] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.409997] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.433295] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 7.449821] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 7.466230] ip_tables: (C) 2000-2006 Netfilter Core Team
[root@(none):/]#[ 7.599988] xt_time: kernel timezone is -0000
[ 7.634646] cfg80211: Calling CRDA to update world regulatory domain
[ 7.660507] cfg80211: World regulatory domain updated:
[ 7.665664] cfg80211: DFS Master region: unset
[ 7.670016] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.721503] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.729515] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.751995] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.760007] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.782489] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.797631] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 7.813066] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 7.830544] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 7.847770] PPP generic driver version 2.4.2
[ 7.868317] NET: Registered protocol family 24
[ 7.918740] usbcore: registered new interface driver rtl8192cu
[root@(none):/]#??x|>n?? >?撖邿傷??1淳12橫W傻lan: port 1(eth0) entered forwarding state
[ 14.206646] br-lan: port 1(eth0) entered forwarding state
[ 16.140763] br-lan: port 1(eth0) entered disabled state
[ 17.140682] libphy: stmmac-0:00 - Link is Up - 1000/Full
[ 17.146156] br-lan: port 1(eth0) entered forwarding state
[ 17.151605] br-lan: port 1(eth0) entered forwarding s
阅读(4946) | 评论(0) | 转发(0) |
