做技术要：鹰击长空，鱼翔浅底。
分类： 嵌入式
2015-01-21 19:36:37
| Starting kernel ... |
| Uncompressing Linux............................................................. ...................................... done, booting the kernel. |
| Linux version 2.6.22.6 (sishuai@ubuntu) (gcc version 3.4.5) #3 Wed Jan 21 03:05: 58 PST 2015 |
| CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 |
| Machine: SMDK2440 |
| Memory policy: ECC disabled, Data cache writeback |
| CPU S3C2440A (id 0x32440001) |
| S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz |
| S3C24XX Clocks, (c) 2004 Simtec Electronics |
| CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on |
| CPU0: D VIVT write-back cache |
| CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets |
| CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets |
| Built 1 zonelists. Total pages: 16256 |
| Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0 |
| irq: clearing subpending status 00000002 |
| PID hash table entries: 256 (order: 8, 1024 bytes) |
| timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 |
| Console: colour dummy device 80x30 |
| Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) |
| Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) |
| Memory: 64MB = 64MB total |
| Memory: 61616KB available (2784K code, 313K data, 132K init) |
| Mount-cache hash table entries: 512 |
| CPU: Testing write buffer coherency: ok |
| NET: Registered protocol family 16 |
| S3C2410 Power Management, (c) 2004 Simtec Electronics |
| S3C2440: Initialising architecture |
| S3C2440: IRQ Support |
| S3C2440: Clock Support, DVS off |
| S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics |
| DMA channel 0 at c4800000, irq 33 |
| DMA channel 1 at c4800040, irq 34 |
| DMA channel 2 at c4800080, irq 35 |
| DMA channel 3 at c48000c0, irq 36 |
| usbcore: registered new interface driver usbfs |
| usbcore: registered new interface driver hub |
| usbcore: registered new device driver usb |
| NET: Registered protocol family 2 |
| IP route cache hash table entries: 1024 (order: 0, 4096 bytes) |
| TCP established hash table entries: 2048 (order: 2, 16384 bytes) |
| TCP bind hash table entries: 2048 (order: 1, 8192 bytes) |
| TCP: Hash tables configured (established 2048 bind 2048) |
| TCP reno registered |
| NetWinder Floating Point Emulator V0.97 (double precision) |
| JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. |
| io scheduler noop registered |
| io scheduler anticipatory registered (default) |
| io scheduler deadline registered |
| io scheduler cfq registered |
| s3c2410-lcd s3c2410-lcd: invalid bpp 16 |
| Console: switching to colour frame buffer device 30x40 |
| fb0: s3c2410fb frame buffer device |
| lp: driver loaded but no devices found |
| ppdev: user-space parallel port driver |
| S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics |
| Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
| s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440 |
| s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 |
| s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440 |
| RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
| loop: module loaded |
| dm9000 Ethernet Driver |
| Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx |
| BAST NOR-Flash Driver, (c) 2004 Simtec Electronics |
| S3C24XX NAND Driver, (c) 2004 Simtec Electronics |
| s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns |
| NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi t) |
| Scanning device for bad blocks |
| Bad eraseblock 84 at 0x00a80000 |
| Bad eraseblock 505 at 0x03f20000 |
| Bad eraseblock 825 at 0x06720000 |
| Bad eraseblock 1490 at 0x0ba40000 |
| Bad eraseblock 1504 at 0x0bc00000 |
| Bad eraseblock 1583 at 0x0c5e0000 |
| Bad eraseblock 1614 at 0x0c9c0000 |
| Creating 8 MTD partitions on "NAND 256MiB 3,3V 8-bit": |
| 0x00000000-0x00004000 : "Boot Agent" |
| mtd: partition "Boot Agent" doesn't end on an erase block -- force read-only |
| 0x00000000-0x00200000 : "S3C2410 flash partition 1" |
| 0x00400000-0x00800000 : "S3C2410 flash partition 2" |
| 0x00800000-0x00a00000 : "S3C2410 flash partition 3" |
| 0x00a00000-0x00e00000 : "S3C2410 flash partition 4" |
| 0x00e00000-0x01800000 : "S3C2410 flash partition 5" |
| 0x01800000-0x03000000 : "S3C2410 flash partition 6" |
| 0x03000000-0x04000000 : "S3C2410 flash partition 7" |
| usbmon: debugfs is not available |
| s3c2410-ohci s3c2410-ohci: S3C24XX OHCI |
| s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 |
| s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 |
| usb usb1: configuration #1 chosen from 1 choice |
| hub 1-0:1.0: USB hub found |
| hub 1-0:1.0: 2 ports detected |
| mice: PS/2 mouse device common for all mice |
| S3C24XX RTC, (c) 2004,2006 Simtec Electronics |
| s3c2440-i2c s3c2440-i2c: slave address 0x10 |
| s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz |
| s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter |
| TCP cubic registered |
| NET: Registered protocol family 1 |
| drivers/rtc/hctosys.c: unable to open rtc device (rtc0) |
| List of all partitions: |
| 1f00 16 mtdblock0 (driver?) |
| 1f01 2048 mtdblock1 (driver?) |
| 1f02 4096 mtdblock2 (driver?) |
| 1f03 2048 mtdblock3 (driver?) |
| 1f04 4096 mtdblock4 (driver?) |
| 1f05 10240 mtdblock5 (driver?) |
| 1f06 24576 mtdblock6 (driver?) |
| 1f07 16384 mtdblock7 (driver?) |
| No filesystem could mount root, tried: ext3 ext2 cramfs msdos vfat romfs |
| Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3) |
