|
#ifndef CFG_BOOTM_LEN
#define CFG_BOOTM_LEN 0x800000 /* use 8MByte as default max gunzip size */
#endif
image_header_t header; //这是很重要的全局变量， 会被armlinux.c 里面的do_bootm_linux()使用
ulong load_addr = CFG_LOAD_ADDR; /* Default Load Address */
//定义在include/configs/*.h 中 ，比如ep7312.h 是这样定义的:
//#define CFG_LOAD_ADDR 0xc0500000 /* default load address */
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong iflag;
ulong addr;
ulong data, len, checksum;
ulong *len_ptr;
uint unc_len = CFG_BOOTM_LEN;
int i, verify;
char *name, *s;
int (*appl)(int, char *[]);
image_header_t *hdr = &header;//之前定义的全局变量
s = getenv ("verify");
verify = (s && (*s == 'n')) ? 0 : 1;
//addr 就是kernel的临时下载的地址
if (argc < 2) {
addr = load_addr;//我们的环境: load_addr = 0x33000000
} else {
addr = simple_strtoul(argv[1], NULL, 16);
}
SHOW_BOOT_PROGRESS (1);
printf ("## Booting image at %08lx ...\n", addr);
//读取kernel image的header
/* Copy header so we can blank CRC field for re-calculation */
#ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash(addr)){
read_dataflash(addr, sizeof(image_header_t), (char *)&header);
} else
#endif
memmove (&header, (char *)addr, sizeof(image_header_t));
//判断魔数，一般不会出错
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
#ifdef __I386__ /* correct image format not implemented yet - fake it */
if (fake_header(hdr, (void*)addr, -1) != NULL) {
/* to compensate for the addition below */
addr -= sizeof(image_header_t);
/* turnof verify,
* fake_header() does not fake the data crc
*/
verify = 0;
} else
#endif /* __I386__ */
{
puts ("Bad Magic Number\n");
SHOW_BOOT_PROGRESS (-1);
return 1;
}
}
SHOW_BOOT_PROGRESS (2);
data = (ulong)&header;
len = sizeof(image_header_t); //header的长度0x40 (64个byte)
checksum = ntohl(hdr->ih_hcrc);
hdr->ih_hcrc = 0;
//crc校验
if (crc32 (0, (uchar *)data, len) != checksum) {
puts ("Bad Header Checksum\n");
SHOW_BOOT_PROGRESS (-2);
return 1;
}
SHOW_BOOT_PROGRESS (3);
#ifdef CONFIG_HAS_DATAFLASH
if (addr_dataflash(addr)){
len = ntohl(hdr->ih_size) + sizeof(image_header_t);
read_dataflash(addr, len, (char *)CFG_LOAD_ADDR);
addr = CFG_LOAD_ADDR;
}
#endif
/* for multi-file images we need the data part, too */
print_image_hdr ((image_header_t *)addr);
//////////////////////////////////////////////////////////////////////////////////
//这里很关键的， 指向了后面的kernel的部分
data = addr + sizeof(image_header_t);//指向后面的kernel部分
len = ntohl(hdr->ih_size); //kernel的实际大小，就是编译后的大小
if (verify) {
puts (" Verifying Checksum ... ");
if (crc32 (0, (uchar *)data, len) != ntohl(hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
SHOW_BOOT_PROGRESS (-3);
return 1;
}
puts ("OK\n");
}
SHOW_BOOT_PROGRESS (4);
len_ptr = (ulong *)data;
#if defined(__PPC__)
if (hdr->ih_arch != IH_CPU_PPC)
#elif defined(__ARM__)
if (hdr->ih_arch != IH_CPU_ARM)
#elif defined(__I386__)
if (hdr->ih_arch != IH_CPU_I386)
#elif defined(__mips__)
if (hdr->ih_arch != IH_CPU_MIPS)
#elif defined(__nios__)
if (hdr->ih_arch != IH_CPU_NIOS)
#elif defined(__M68K__)
if (hdr->ih_arch != IH_CPU_M68K)
#elif defined(__microblaze__)
if (hdr->ih_arch != IH_CPU_MICROBLAZE)
#elif defined(__nios2__)
if (hdr->ih_arch != IH_CPU_NIOS2)
#elif defined(__blackfin__)
if (hdr->ih_arch != IH_CPU_BLACKFIN)
#elif defined(__avr32__)
if (hdr->ih_arch != IH_CPU_AVR32)
#else
# error Unknown CPU type
#endif
{
printf ("Unsupported Architecture 0x%x\n", hdr->ih_arch);
SHOW_BOOT_PROGRESS (-4);
return 1;
}
SHOW_BOOT_PROGRESS (5);
switch (hdr->ih_type) {
case IH_TYPE_STANDALONE:
name = "Standalone Application";
/* A second argument overwrites the load address */
if (argc > 2) {
hdr->ih_load = htonl(simple_strtoul(argv[2], NULL, 16));
}
break;
case IH_TYPE_KERNEL:
name = "Kernel Image";
break;
case IH_TYPE_MULTI:
name = "Multi-File Image";
len = ntohl(len_ptr[0]);
/* OS kernel is always the first image */
data += 8; /* kernel_len + terminator */
for (i=1; len_ptr[i]; ++i)
data += 4;
break;
default: printf ("Wrong Image Type for %s command\n", cmdtp->name);
SHOW_BOOT_PROGRESS (-5);
return 1;
}
SHOW_BOOT_PROGRESS (6);
//执行kernel的准备工作
//--------进入最后的阶段
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#ifdef CONFIG_AMIGAONEG3SE
/*
* We've possible left the caches enabled during
* bios emulation, so turn them off again
*/
icache_disable();
invalidate_l1_instruction_cache();
flush_data_cache();
dcache_disable();
#endif
/* 最关键的地方: 搬运kernel到ih_load指定的地址上去*/
switch (hdr->ih_comp) {
case IH_COMP_NONE: // -C none
if(ntohl(hdr->ih_load) == addr) { //判断download的地址是否和kernel规定的地址相同
printf (" XIP %s ... ", name); //XIP: 原地执行
} else {
#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
size_t l = len;
void *to = (void *)ntohl(hdr->ih_load);
void *from = (void *)data;
printf (" Loading %s ... ", name);
while (l > 0) {
size_t tail = (l > CHUNKSZ) ? CHUNKSZ : l;
WATCHDOG_RESET();
memmove (to, from, tail);
to += tail;
from += tail;
l -= tail;
}
#else /* !(CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG) */
//这里就是搬运的代码
memmove(void * dest, const void * src, size_t count) ((void *) ntohl(hdr->ih_load), (uchar *)data, len);
#endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
}
break;
case IH_COMP_GZIP:
printf (" Uncompressing %s ... ", name);
if (gunzip ((void *)ntohl(hdr->ih_load), unc_len, // 把它解压到 ih_load的位置上去
(uchar *)data, &len) != 0) {
puts ("GUNZIP ERROR - must RESET board to recover\n");
SHOW_BOOT_PROGRESS (-6);
do_reset (cmdtp, flag, argc, argv);
}
break;
#ifdef CONFIG_BZIP2
case IH_COMP_BZIP2:
printf (" Uncompressing %s ... ", name);
/*
* If we've got less than 4 MB of malloc() space,
* use slower decompression algorithm which requires
* at most 2300 KB of memory.
*/
i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load),
&unc_len, (char *)data, len,
CFG_MALLOC_LEN < (4096 * 1024), 0);
if (i != BZ_OK) {
printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i);
SHOW_BOOT_PROGRESS (-6);
udelay(100000);
do_reset (cmdtp, flag, argc, argv);
}
break;
#endif /* CONFIG_BZIP2 */
default:
if (iflag)
enable_interrupts();
printf ("Unimplemented compression type %d\n", hdr->ih_comp);
SHOW_BOOT_PROGRESS (-7);
return 1;
}
//搬运完毕
puts ("OK\n");
SHOW_BOOT_PROGRESS (7);
switch (hdr->ih_type) {
case IH_TYPE_STANDALONE:
if (iflag)
enable_interrupts();
/* load (and uncompress), but don't start if "autostart"
* is set to "no"
*/
if (((s = getenv("autostart")) != NULL) && (strcmp(s,"no") == 0)) {
char buf[32];
sprintf(buf, "%lX", len);
setenv("filesize", buf);
return 0;
}
appl = (int (*)(int, char *[]))ntohl(hdr->ih_ep);
(*appl)(argc-1, &argv[1]);
return 0;
case IH_TYPE_KERNEL:
case IH_TYPE_MULTI:
/* handled below */
break;
default:
if (iflag)
enable_interrupts();
printf ("Can't boot image type %d\n", hdr->ih_type);
SHOW_BOOT_PROGRESS (-8);
return 1;
}
SHOW_BOOT_PROGRESS (8);
//判断何种操作系统
switch (hdr->ih_os) {
default: /* handled by (original) Linux case */
case IH_OS_LINUX:
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
//接下来就要调用do_bootm_linux() 函数了，这里要启动kernel
do_bootm_linux (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
case IH_OS_NETBSD:
do_bootm_netbsd (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
#ifdef CONFIG_LYNXKDI
case IH_OS_LYNXOS:
do_bootm_lynxkdi (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
#endif
case IH_OS_RTEMS:
do_bootm_rtems (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
#if (CONFIG_COMMANDS & CFG_CMD_ELF)
case IH_OS_VXWORKS:
do_bootm_vxworks (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
case IH_OS_QNX:
do_bootm_qnxelf (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
#endif /* CFG_CMD_ELF */
#ifdef CONFIG_ARTOS
case IH_OS_ARTOS:
do_bootm_artos (cmdtp, flag, argc, argv,
addr, len_ptr, verify);
break;
#endif
}
SHOW_BOOT_PROGRESS (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
do_reset (cmdtp, flag, argc, argv);
#endif
return 1;
}
U_BOOT_CMD(
bootm, CFG_MAXARGS, 1, do_bootm,
"bootm - boot application image from memory\n",
"[addr [arg ...]]\n - boot application image stored in memory\n"
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
"\t'arg' can be the address of an initrd image\n"
#ifdef CONFIG_OF_FLAT_TREE
"\tWhen booting a Linux kernel which requires a flat device-tree\n"
"\ta third argument is required which is the address of the of the\n"
"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
"\tuse a '-' for the second argument. If you do not pass a third\n"
"\ta bd_info struct will be passed instead\n"
#endif
);
|
