分类：
2012-05-15 20:00:38
cisco 模拟器 dynamipsgui 模拟器模块
为了方便大家做实验,免得一个一个去试,做这里我把每个设备的模块的信息都写出来.(bat文件)
(针对刚刚接触dynamips不久的朋友)
注意：保证你的IOS版本在12.2S以上,在模拟交换时候为了保证实验能成功.IOS版本在12.3以上
首先从C7200开始
Slot 0:
C7200-IO-FE <——> 支持1个Fastethernet
C7200-IO-2FE <——> 支持2个 Fastethernet接口 (DynamipsGUI 2.3 里面没有这个选项,想用只有自己添加了)
C7200-IO-GE-E <——> 插这个卡以后会同时出现2个端口,Ethernet0/0和GigabitEthernet0/0 (反正我没有用到过这个卡)
注意:这三个卡只允许插在Slot0口,如果插入后面的slot口是无效的.
Slot 1-5:
PA-2FE-TX <——> 支持2个Fastethernet接口
PA-FE-TX <——> 支持1个Fastethernet接口
PA-4E <——> 支持4个Ethernet接口
PA-4T+ <——> 支持4个serial接口
PA-8E <——> 支持8个Ethernet接口
PA-8T <——> 支持8个serial接口
PA-A1 <——> 支持1个ATM port adapter接口
PA-GE <——> 支持1个GigabitEthernet接口
PA-POS-OC3<——> 支持1个Packet Over SONET/SDH接口(用于更高速度的接口)
然后是C3600(3620/3640/3660)
NM-16ESW <——> 支持16个Fastethernet接口(交换模块,在使用此模块做交换实验时候,请使用no ip routing 关闭端口路由)
NM-1E <——> 支持1个Ethernet接口
NM-1FE-TX<——> 支持1个Fastethernet接口
NM-4E <——> 支持4个Ethernet接口
NM-4T <——> 支持4个serial接口
Leopard-2FE<——>支持2个Fastethernet接口(3660专用,并且只能在slot 0 下使用)
注意:3620只能使用2个slot,3640可以使用4个slot,除Leopard-2FE模块做了限制,其他模块没有做限制插具体哪个 slot. (DynamipsGUI里对slot已经做了限制,最近DynamipSeeV2.0已经发布了,但是里面不支持3660)
c3725/c3745/c2691
GT96100-FE <——>支持2个Fastethernet接口(只限制在slot 0)
NM-16ESW <——>支持16个Fastethernet接口(不做重复说明)
NM-1FE-TX <——>支持1个Fastethernet接口
NM-4T <——>支持4个serial接口
c2600(2610/2611/2620/2621/2610XM/2620XM/2650XM)
NM-16ESW <——> 支持16个Fastethernet接口
NM-1E <——> 支持1个Ethernet接口
NM-1FE-TX<——> 支持1个Fastethernet接口
NM-4E <——> 支持4个Ethernet接口
CISCO2600-MB-2E<——>支持2个Ethernet接口
CISCO2600-MB-2FE<——>支持2个Fastethernet接口
注>DynamipsGUI里的模块CISCO2600-MB-2E,CISCO2600-MB-2FE,并且只有2620类型可选
Dynamipsee里有2610/2611/2620/2621/2610XM/2620XM/2650XM类型选择.但没有2610/2611 /2620/2621/2610XM/2620XM/2650XM
建议找个小的IOS把2600模拟成主机用 C2600IOS
===========1700s===========
1710
Slots: 0 (available)
WIC slots: 0
CISCO1710-MB-1FE-1E (1FastEthernet port and 1 Ethernet port, automatically used)
Note, interfaces do notuse a slot designation (e.g. “f0”)
1720
Note, interfaces do notuse a slot designation (e.g. “f0”)
1721
Note, interfaces do notuse a slot designation (e.g. “f0”)
1750
Note, interfaces do notuse a slot designation (e.g. “f0”)
1751
1760
Slots: 0 (available)
WIC slots: 2
C1700-MB-1ETH (1FastEthernet port, automatically used)
Cards:
- WIC-1T (1 Serial port)
- WIC-2T (2 Serialports)
- WIC-1ENET (1 Ethernetports)
===========2600s===========
2610
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1E (1Ethernet port, automatically used)
2611
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2E (2Ethernet ports, automatically used)
2620
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1FastEthernet port, automatically used)
2621
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
2610XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernetport, automatically used)
2611XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
2620XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1FastEthernet port, automatically used)
2621XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
2650XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1FastEthernet port, automatically used)
2651XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2FastEthernet ports, automatically used)
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet, 4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernetswitch module, 16 ports)
- NM-NAM
- NM-IDS
- WIC-1T (1 Serial port)
- WIC-2T (2 Serialports)
===========3600s===========
3660
Slots: 6 (available)
3640
Slots: 4
3620
Slots: 2
Cards:
- NM-1E (Ethernet, 1 port)
- NM-4E (Ethernet,4 ports)
- NM-1FE-TX (FastEthernet, 1 port)
- NM-16ESW (Ethernetswitch module, 16 ports)
- NM-4T (Serial,4 ports)
- Leopard-2FE (Cisco3660 FastEthernet in slot 0, automatically used)
===========3700s===========
2691 (The 2691 isessentially a 3700 with 1 slot)
Slots: 1 (available)
WIC slots: 3
3725
Slots: 2 (available)
WIC slots: 3
3745
Slots: 4 (available)
WIC slots: 3
Cards:
- NM-1FE-TX (FastEthernet, 1 port)
- NM-4T (Serial,4 ports)
- NM-16ESW (Ethernetswitch module, 16 ports)
- GT96100-FE (2integrated ports, automatically used)
- NM-NAM
- NM-IDS
- WIC-1T (1 Serial port)
- WIC-2T (2 Serialports)
===========7200s===========
7206
Slots: 6 (available)
Chassis types:
- STD
- VXR
NPEs:
- NPE-100
- NPE-150
- NPE-175
- NPE-200
- NPE-225
- NPE-300
- NPE-400
- NPE-G1
- NPE-G2 (Requires the useof NPE-G2 IOS images)
Cards:
- C7200-IO-FE (FastEthernet, slot 0 only)
- C7200-IO-2FE (FastEthernet,2 ports, slot 0 only)
- C7200-IO-GE (GigabitEthernet, slot 0 only)
- PA-FE-TX (FastEthernet)
- PA-2FE-TX (FastEthernet, 2ports)
- PA-4E (Ethernet, 4 ports)
- PA-8E (Ethernet, 8 ports)
- PA-4T+ (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)
- PA-POS-OC3 (POS)
- PA-GE (GigabitEthernet)
