2012年(464)
分类: Delphi
2012-08-20 15:01:45
Select the appropriate lining and grinding media is one way to improve work
efficiency of in sand
production plant. Lined with two effects, one is to protect the cylinder is not
worn, on the other hand to prevent the material in contact with iron, to avoid
material contamination. Generally used in the lining of the more wear and rules
to ensure durable. While increasing the effective volume in the formula into the
feeding amount to the same premise, density, hardness, size is a reasonable
ratio of grinding media in order to shorten the milling time, while reducing the
wear rate of grinding media.
The raw materials used in cement production are
widely available in great quantities. Limestone, marl, and chalk are the most
common sources of calcium in cement (converted into lime through calcination).
Common sources of silicon include clay, sand, and shale. Certain waste products,
such as fly ash, can also be used as a silicon source. The iron and aluminum can
be provided as iron ore and bauxite, but recycled metals can also be used.
Finally, about 5% of cement by weight is gypsum, a common calcium- and
sulfur-based mineral.
Determine the appropriate proportion of material, ball,
water is important in sand production. A grinding load have a significant impact
on the improvement of milling efficiency, loading capacity is too small, the
rattle and abrasive material is small, excessive loading, into the feeding
amount to reduce the grinding media interactions increase on materials for
reduce reactive and abrasive. Grinding media load a certain amount of time each
ball into the feeding amount of different milling is not the same, into the
feeding amount is too small, are able to shorten the milling time, but daily
output is decreased, too much into the feeding amount, the cylinder body
remaining less space, reduce the rattle of the grinding media milling efficiency
is low.
With all of these raw materials, the distance and quality of the
sources have a big impact on transportation energy use. Water is used for
washing, and dust generation. Some aggregates that have been used in concrete
production have turned out to be sources of radon gas. The worst problems were
when uranium mine tailings were used as concrete aggregate, but some natural
stone also emits radon. If concerned, you might want to have the aggregate
tested by for
radon. These are the main points you should pay attention when choose
construction aggregates.