分类：
2011-09-28 15:47:52
原文地址：u-boot-1.1.6移植到FL2440-I开发板 作者：mistyrain
Author: misty (qixb_11(a)163.com)
1 建立环境 1.1 交叉编译工具解压arm-linux-gcc-3.3.2.tar.bz2到/opt目录下，编辑.bashrc，添加一行设置PATH变量。
|
[xxx@localhost ~]$ vi .bashrc export PATH=$PATH:/opt/usr/local/arm/3.3.2/bin |
1.2 u-boot环境
进入board目录，拷贝smdk2410为fl2440；进入board/fl2440，将smdk2410.c重命名为fl2440.c，修改Makefile，将smdk2410.o修改为fl2440.o；修改根目录下的Makefile，添加fl2440_config；进入include/configs目录，将smdk2410.h拷贝为fl2440.h。将include目录下的s3c2410.h拷贝为s3c2440.h；删除cpu/arm920t目录下的除s3c24x0外的其它目录。删除include目录下，除asm-arm外的其它目录。
|
[xxx@localhost u-boot-1.1.6]$ cd board/ [xxx@localhost board]$ [xxx@localhost board]$ cp -r smdk2410 fl2440 [xxx@localhost board]$ cd fl -bash: cd: fl: No such file or directory [xxx@localhost board]$ cd fl2440/ [xxx@localhost fl2440]$ ls config.mk flash.c lowlevel_init.S Makefile smdk2410.c u-boot.lds [xxx@localhost fl2440]$ [xxx@localhost fl2440]$ mv smdk2410.c fl2440.c [xxx@localhost u-boot-1.1.6]$ vi Makefile [xxx@localhost u-boot-1.1.6]$ cd include/configs/ [xxx@localhost configs]$ cp smdk2410.h fl2440.h |
Makefile中添加的代码如下：
|
1879 smdk2410_config : unconfig 1880 @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 1881 1882 fl2440_config : unconfig 1883 @$(MKCONFIG) $(@:_config=) arm arm920t fl2440 NULL s3c24x0 |
做好以后可以编译下试试看是否可以编译通。
|
[qixb@localhost u-boot-1.1.6]$make fl2440_config [qixb@localhost u-boot-1.1.6]$make |
可以编译通过，但现在编译出来的是smdk2410的u-boot，下面修改相应文件移植到FL2440-I开发板上。
1.3 删除目录（非必需）
删除cpu目录下，除arm920t之外的其它目录；删除board目录下，除smdk2410和fl2440之外的其它目录；删除include/configs目录，除fl2440.h之外的其它文件。
|
[xxx@localhost u-boot-1.1.6]$ cd cpu/ [xxx@localhost cpu]$ ls 74xx_7xx arm920t arm946es bf533 lh7a40x mips mpc8220 mpc83xx mpc8xx ppc4xx sa1100 arm1136 arm925t arm_intcm i386 mcf52x2 mpc5xx mpc824x mpc85xx nios pxa arm720t arm926ejs at32ap ixp microblaze mpc5xxx mpc8260 mpc86xx nios2 s3c44b0 [xxx@localhost cpu]$ ls arm920t [xxx@localhost cpu]$ [xxx@localhost board]$ ls 100ask24x0 fl2440 smdk2400 smdk2410 [xxx@localhost configs]$ ls 100ask24x0.h fl2440.h smdk2400.h smdk2410.h [xxx@localhost configs]$ |
2 移植
首先，将使用宏CONFIG_S3C2410的地方也添加CONFIG_S3C2440（可以使用SI的搜索功能找到所有CONFIG_S3C2410的地方）。
修改的部分我用Beyond Compare比较结果贴出来。
2.1 start.Scpu/arm/arm920t
修改cpu/arm/arm920t目录下的start.S文件，
修改中断和时钟频率。如果在RAM中运行，则修改relocate条件。
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\cpu\arm920t\start.S
Right file: Z:\work\origin\u-boot-1.1.6\cpu\arm920t\start.S
|
124 |
#elif defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) |
<> |
124 |
#elif defined(CONFIG_S3C2410) |
|
|
||||
|
129 |
|
+- |
|
|
|
130 |
#if defined(CONFIG_S3C2440) |
|
|
|
|
131 |
#define CLK_CTL_BASE 0x4c000000 |
|
|
|
|
132 |
#define MDIV_405 0x7f<<12 |
|
|
|
|
133 |
#define PSDIV_405 0x21 |
|
|
|
|
134 |
#endif /* CONFIG_S3C2440 */ |
|
|
|
|
|
||||
|
137 |
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) |
<> |
131 |
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) |
|
|
||||
|
149 |
ldr r1, =0x7ff /*Old Vlaue 0x3ff modify 0x7ff */ |
<> |
|
|
|
150 |
ldr r0, =INTSUBMSK |
|
143 |
ldr r1, =0x3ff |
|
151 |
str r1, [r0] |
|
|
|
|
152 |
# endif |
|
|
|
|
153 |
|
|
|
|
|
154 |
# if defined(CONFIG_S3C2440) |
|
|
|
|
155 |
ldr r1, =0x7fff /* INTSUBMASK have 15bits */ |
|
|
|
|
|
||||
|
160 |
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) |
+- |
|
|
|
|
||||
|
166 |
#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ |
<> |
153 |
#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ |
|
167 |
|
|
|
|
|
168 |
#if defined(CONFIG_S3C2440) |
|
|
|
|
169 |
/* FCLK:HCLK:PCLK = 1:4:8 */ |
|
|
|
|
170 |
/* default FCLK is 120 MHz ! */ |
|
|
|
|
171 |
ldr r0, =CLKDIVN |
|
|
|
|
172 |
mov r1, #5 |
|
|
|
|
173 |
str r1, [r0] |
|
|
|
|
174 |
#endif /* CONFIG_S3C2440 */ |
|
|
|
|
175 |
|
|
|
|
|
176 |
/* if HDIVN is not 0, has to be changed from fast bus mode to Asynchronous bus mode */ |
|
|
|
|
177 |
/* R1_nF and R1_iA reference to vivi s3c2440.h */ |
|
|
|
|
178 |
/* MMU_SetAsyncBusMode */ |
|
|
|
|
179 |
mrc p15,0,r1,c1,c0,0 |
|
|
|
|
180 |
orr r1,r1,#0xc0000000 |
|
|
|
|
181 |
mcr p15,0,r1,c1,c0,0 |
|
|
|
|
182 |
|
|
|
|
|
183 |
#if defined(CONFIG_S3C2440) |
|
|
|
|
184 |
/* set CPU clock 405MHz */ |
|
|
|
|
185 |
mov r1,#CLK_CTL_BASE |
|
|
|
|
186 |
mov r2,#MDIV_405 |
|
|
|
|
187 |
add r2,r2,#PSDIV_405 |
|
|
|
|
188 |
str r2,[r1,#0x04] |
|
|
|
|
189 |
#endif |
|
|
|
|
190 |
|
|
|
|
|
191 |
#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */ |
|
|
|
2.2 lowlevel_init.S
board/fl2440
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\board\fl2440\lowlevel_init.S
Right file: Z:\work\origin\u-boot-1.1.6\board\fl2440\lowlevel_init.S
|
54 |
#define B1_BWSCON (DW16) |
<> |
54 |
#define B1_BWSCON (DW32) |
|
55 |
#define B2_BWSCON (DW16 + WAIT + UBLB) |
|
55 |
#define B2_BWSCON (DW16) |
|
56 |
#define B3_BWSCON (DW16 + UBLB) |
|
56 |
#define B3_BWSCON (DW16 + WAIT + UBLB) |
|
57 |
#define B4_BWSCON (DW16 + WAIT + UBLB) |
|
57 |
#define B4_BWSCON (DW16) |
|
58 |
#define B5_BWSCON (DW8) |
|
58 |
#define B5_BWSCON (DW16) |
|
|
||||
|
93 |
#define B3_Tacp 0x3 /* 6clk */ |
<> |
93 |
#define B3_Tacp 0x3 /* 6clk */ |
|
|
||||
|
97 |
#define B4_Tcos 0x3 /* 4clk */ |
<> |
97 |
#define B4_Tcos 0x0 /* 0clk */ |
|
|
||||
|
99 |
#define B4_Tcoh 0x1 /* 1clk */ |
<> |
99 |
#define B4_Tcoh 0x0 /* 0clk */ |
|
100 |
#define B4_Tah 0x3 /* 4clk */ |
|
100 |
#define B4_Tah 0x0 /* 0clk */ |
|
101 |
#define B4_Tacp 0x6 /* 6clk */ |
|
101 |
#define B4_Tacp 0x0 |
|
|
||||
|
|
|
-+ |
123 |
#define Trp 0x0 /* 2clk */ |
|
|
||||
|
125 |
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) |
+- |
|
|
|
126 |
#define Trp 0x0 /* 2clk */ |
|
|
|
|
|
||||
|
128 |
#endif |
+- |
|
|
|
129 |
#if defined(CONFIG_S3C2440) |
|
|
|
|
130 |
#define Trp 0x1 /* 3clk */ |
|
|
|
|
131 |
#define REFCNT 0x4f4 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ |
|
|
|
|
132 |
#endif |
|
|
|
2.3 fl2440.c
board/fl2440
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\board\fl2440\fl2440.c
Right file: Z:\work\origin\u-boot-1.1.6\board\fl2440\fl2440.c
|
39 |
#elif FCLK_SPEED==1 |
<> |
39 |
#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ |
|
40 |
#if defined(CONFIG_S3C2410) /* Fout = 202.8MHz */ |
|
|
|
|
|
||||
|
44 |
#elif defined(CONFIG_S3C2440) /* Fout = 405MHz */ |
+- |
|
|
|
45 |
#define M_MDIV 0x7F |
|
|
|
|
46 |
#define M_PDIV 0x2 |
|
|
|
|
47 |
#define M_SDIV 0x1 |
|
|
|
|
|
||||
|
49 |
#endif /* FCLK_SPEED==1 */ |
+- |
|
|
|
|
||||
|
58 |
#if defined(CONFIG_S3C2410) |
<> |
|
|
|
59 |
#define U_M_MDIV 0x38 |
|
52 |
#define U_M_MDIV 0x48 |
|
60 |
#define U_M_PDIV 0x2 |
|
53 |
#define U_M_PDIV 0x3 |
|
|
||||
|
62 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
63 |
#define U_M_MDIV 0x38 |
|
|
|
|
64 |
#define U_M_PDIV 0x2 |
|
|
|
|
65 |
#define U_M_SDIV 0x2 |
|
|
|
|
66 |
#endif |
|
|
|
|
|
||||
|
118 |
#ifdef CONFIG_S3C2440 |
<> |
|
|
|
119 |
gd->bd->bi_arch_number = MACH_TYPE_FL2440; |
|
|
|
|
120 |
#elif |
|
|
|
|
121 |
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; |
|
106 |
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; |
|
122 |
#endif |
|
107 |
|
2.4 fl2440.h
include/configs
修改网络的配置
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\include\configs\fl2440.h
Right file: Z:\work\origin\u-boot-1.1.6\include\configs\fl2440.h
|
29 |
#ifndef __CONFIG_FL2440_H |
<> |
29 |
#ifndef __CONFIG_H |
|
30 |
#define __CONFIG_FL2440_H |
|
30 |
#define __CONFIG_H |
|
|
||||
|
32 |
#define CONFIG_SKIP_LOWLEVEL_INIT |
+- |
|
|
|
33 |
#define CONFIG_SKIP_RELOCATE_UBOOT |
|
|
|
|
34 |
|
|
|
|
|
|
||||
|
40 |
#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2410 SoC */ |
<> |
37 |
#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ |
|
41 |
//#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ |
|
|
|
|
42 |
#define CONFIG_FL2440 1 /* on a FL2440 Board */ |
|
38 |
#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ |
|
|
||||
|
60 |
#if 0 |
+- |
|
|
|
|
||||
|
64 |
#endif |
+- |
|
|
|
65 |
#define CONFIG_DRIVER_DM9000 1 |
|
|
|
|
66 |
#define CONFIG_DM9000_USE_16BIT 1 |
|
|
|
|
67 |
#define CONFIG_DM9000_BASE 0x20000000 |
|
|
|
|
68 |
#define DM9000_IO CONFIG_DM9000_BASE |
|
|
|
|
69 |
#define DM9000_DATA (CONFIG_DM9000_BASE+4) |
|
|
|
|
|
||||
|
122 |
#define CFG_PROMPT "FL2440 # " /* Monitor Command Prompt */ |
<> |
111 |
#define CFG_PROMPT "SMDK2410 # " /* Monitor Command Prompt */ |
|
|
||||
|
|
|
-+ |
157 |
#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ |
|
|
||||
|
169 |
#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ |
<> |
159 |
#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ |
|
|
||||
|
171 |
#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ |
+- |
|
|
注：如果不在DRAM中调试，则不用定义CONFIG_SKIP_LOWLEVEL_INIT和CONFIG_SKIP_RELOCATE_UBOOT。
DM9000A接NGCS4，IO映射区为BANK4。
CONFIG_DM9000_BASE的值有的选择0x20000300，目前还不知道为什么。但是选择0x20000000可以使用。
因为DM9000A的CMD管脚接ADDR2线，所以偏移地址加4。
2.5 mach_types.h
include/asm目录下
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\include\asm-arm\mach-types.h
Right file: Z:\work\origin\u-boot-1.1.6\include\asm-arm\mach-types.h
|
209 |
#define MACH_TYPE_FL2440 888 |
+- |
|
|
2.6 common.h
include
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\include\common.h
Right file: Z:\work\origin\u-boot-1.1.6\include\common.h
|
449 |
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) || defined(CONFIG_S3C2440) |
<> |
449 |
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) |
2.7 s3c24x0.h
include
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\include\s3c24x0.h
Right file: Z:\work\origin\u-boot-1.1.6\include\s3c24x0.h
|
89 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
90 |
S3C24X0_REG32 SUBSRCPND; |
|
|
|
|
91 |
S3C24X0_REG32 INTSUBMSK; |
|
|
|
|
92 |
#endif |
|
|
|
|
|
||||
|
102 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
103 |
S3C24X0_REG32 DISRCC; |
|
|
|
|
104 |
#endif |
|
|
|
|
|
||||
|
107 |
S3C24X0_REG32 DIDSTC; |
+- |
|
|
|
108 |
#endif |
|
|
|
|
109 |
#ifdef CONFIG_S3C2440 |
|
|
|
|
|
||||
|
121 |
S3C24X0_REG32 res[7]; |
+- |
|
|
|
122 |
#endif |
|
|
|
|
123 |
#ifdef CONFIG_S3C2440 |
|
|
|
|
|
||||
|
142 |
#if defined (CONFIG_S3C2440) |
+- |
|
|
|
143 |
S3C24X0_REG32 CAMDIVN; |
|
|
|
|
144 |
#endif |
|
|
|
|
|
||||
|
165 |
S3C24X0_REG32 LCDINTPND; |
+- |
|
|
|
166 |
S3C24X0_REG32 LCDSRCPND; |
|
|
|
|
167 |
S3C24X0_REG32 LCDINTMSK; |
|
|
|
|
168 |
S3C24X0_REG32 LPCSEL; |
|
|
|
|
169 |
#endif |
|
|
|
|
170 |
#ifdef CONFIG_S3C2440 |
|
|
|
|
|
||||
|
476 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
477 |
S3C24X0_REG32 GPACON; |
|
|
|
|
478 |
S3C24X0_REG32 GPADAT; |
|
|
|
|
479 |
S3C24X0_REG32 res1[2]; |
|
|
|
|
480 |
S3C24X0_REG32 GPBCON; |
|
|
|
|
481 |
S3C24X0_REG32 GPBDAT; |
|
|
|
|
482 |
S3C24X0_REG32 GPBUP; |
|
|
|
|
483 |
S3C24X0_REG32 res2; |
|
|
|
|
484 |
S3C24X0_REG32 GPCCON; |
|
|
|
|
485 |
S3C24X0_REG32 GPCDAT; |
|
|
|
|
486 |
S3C24X0_REG32 GPCUP; |
|
|
|
|
487 |
S3C24X0_REG32 res3; |
|
|
|
|
488 |
S3C24X0_REG32 GPDCON; |
|
|
|
|
489 |
S3C24X0_REG32 GPDDAT; |
|
|
|
|
490 |
S3C24X0_REG32 GPDUP; |
|
|
|
|
491 |
S3C24X0_REG32 res4; |
|
|
|
|
492 |
S3C24X0_REG32 GPECON; |
|
|
|
|
493 |
S3C24X0_REG32 GPEDAT; |
|
|
|
|
494 |
S3C24X0_REG32 GPEUP; |
|
|
|
|
495 |
S3C24X0_REG32 res5; |
|
|
|
|
496 |
S3C24X0_REG32 GPFCON; |
|
|
|
|
497 |
S3C24X0_REG32 GPFDAT; |
|
|
|
|
498 |
S3C24X0_REG32 GPFUP; |
|
|
|
|
499 |
S3C24X0_REG32 res6; |
|
|
|
|
500 |
S3C24X0_REG32 GPGCON; |
|
|
|
|
501 |
S3C24X0_REG32 GPGDAT; |
|
|
|
|
502 |
S3C24X0_REG32 GPGUP; |
|
|
|
|
503 |
S3C24X0_REG32 res7; |
|
|
|
|
504 |
S3C24X0_REG32 GPHCON; |
|
|
|
|
505 |
S3C24X0_REG32 GPHDAT; |
|
|
|
|
506 |
S3C24X0_REG32 GPHUP; |
|
|
|
|
507 |
S3C24X0_REG32 res8; |
|
|
|
|
508 |
|
|
|
|
|
509 |
S3C24X0_REG32 MISCCR; |
|
|
|
|
510 |
S3C24X0_REG32 DCLKCON; |
|
|
|
|
511 |
S3C24X0_REG32 EXTINT0; |
|
|
|
|
512 |
S3C24X0_REG32 EXTINT1; |
|
|
|
|
513 |
S3C24X0_REG32 EXTINT2; |
|
|
|
|
514 |
S3C24X0_REG32 EINTFLT0; |
|
|
|
|
515 |
S3C24X0_REG32 EINTFLT1; |
|
|
|
|
516 |
S3C24X0_REG32 EINTFLT2; |
|
|
|
|
517 |
S3C24X0_REG32 EINTFLT3; |
|
|
|
|
518 |
S3C24X0_REG32 EINTMASK; |
|
|
|
|
519 |
S3C24X0_REG32 EINTPEND; |
|
|
|
|
520 |
S3C24X0_REG32 GSTATUS0; |
|
|
|
|
521 |
S3C24X0_REG32 GSTATUS1; |
|
|
|
|
522 |
S3C24X0_REG32 GSTATUS2; |
|
|
|
|
523 |
S3C24X0_REG32 GSTATUS3; |
|
|
|
|
524 |
S3C24X0_REG32 GSTATUS4; |
|
|
|
|
525 |
#endif |
|
||
2.8 s3c2440.h
include
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\include\s3c2440.h
Right file: Z:\work\origin\u-boot-1.1.6\include\s3c2440.h
|
25 |
* NAME : s3c2440.h |
<> |
25 |
* NAME : s3c2410.h |
|
26 |
* Version : 03.06.2011 |
|
26 |
* Version : 31.3.2003 |
|
|
||||
|
31 |
#ifndef __S3C2440_H__ |
<> |
31 |
#ifndef __S3C2410_H__ |
|
32 |
#define __S3C2440_H__ |
|
32 |
#define __S3C2410_H__ |
2.9 s3c24x0_rtc.h
rtc
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\rtc\s3c24x0_rtc.c
Right file: Z:\work\origin\u-boot-1.1.6\rtc\s3c24x0_rtc.c
|
37 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
38 |
#include |
|
|
|
2.10 serial.c
cpu/arm/arm920t/s3c24x0
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\cpu\arm920t\s3c24x0\serial.c
Right file: Z:\work\origin\u-boot-1.1.6\cpu\arm920t\s3c24x0\serial.c
|
22 |
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) || defined(CONFIG_S3C2440) |
<> |
22 |
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) |
|
|
||||
|
28 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
29 |
#include |
|
|
|
|
|
||||
|
185 |
#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) || defined (CONFIG_S3C2440) */ |
<> |
183 |
#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ |
2.11 speed.c
cpu/arm/arm920t/s3c24x0
修改get_PLLCLK函数
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\cpu\arm920t\s3c24x0\speed.c
Right file: Z:\work\origin\u-boot-1.1.6\cpu\arm920t\s3c24x0\speed.c
|
33 |
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) || defined(CONFIG_S3C2440) |
<> |
33 |
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) |
|
|
||||
|
39 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
40 |
#include |
|
|
|
|
|
||||
|
72 |
#if defined(CONFIG_S3C2440) |
+- |
|
|
|
73 |
if (pllreg == MPLL) |
|
|
|
|
74 |
return((CONFIG_SYS_CLK_FREQ * m * 2) / (p << s)); |
|
|
|
|
75 |
else if (pllreg == UPLL) |
|
|
|
|
76 |
#endif |
|
|
|
|
77 |
|
|
|
|
|
|
||||
|
87 |
/* for s3c2440 */ |
+- |
|
|
|
88 |
#define S3C2440_CLKDIVN_PDIVN (1<<0) |
|
|
|
|
89 |
#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1) |
|
|
|
|
90 |
#define S3C2440_CLKDIVN_HDIVN_1 (0<<1) |
|
|
|
|
91 |
#define S3C2440_CLKDIVN_HDIVN_2 (1<<1) |
|
|
|
|
92 |
#define S3C2440_CLKDIVN_HDIVN_4_8 (2<<1) |
|
|
|
|
93 |
#define S3C2440_CLKDIVN_HDIVN_3_6 (3<<1) |
|
|
|
|
94 |
#define S3C2440_CLKDIVN_UCLK (1<<3) |
|
|
|
|
95 |
|
|
|
|
|
96 |
#define S3C2440_CAMDIVN_CAMCLK_MASK (0xf<<0) |
|
|
|
|
97 |
#define S3C2440_CAMDIVN_CAMCLK_SEL (1<<4) |
|
|
|
|
98 |
#define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) |
|
|
|
|
99 |
#define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) |
|
|
|
|
100 |
#define S3C2440_CAMDIVN_DVSEN (1<<12) |
|
|
|
|
101 |
|
|
|
|
|
|
||||
|
106 |
unsigned long clkdiv; |
+- |
|
|
|
107 |
unsigned long camdiv; |
|
|
|
|
108 |
int hdiv = 1; |
|
|
|
|
109 |
|
|
|
|
|
110 |
#if defined(CONFIG_S3C2440) |
|
|
|
|
111 |
clkdiv = clk_power->CLKDIVN; |
|
|
|
|
112 |
camdiv = clk_power->CAMDIVN; |
|
|
|
|
|
||||
|
114 |
/* work out clock scalings */ |
+- |
|
|
|
115 |
switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) |
|
|
|
|
116 |
{ |
|
|
|
|
117 |
case S3C2440_CLKDIVN_HDIVN_1: |
|
|
|
|
118 |
hdiv = 1; |
|
|
|
|
119 |
break; |
|
|
|
|
120 |
|
|
|
|
|
121 |
case S3C2440_CLKDIVN_HDIVN_2: |
|
|
|
|
122 |
hdiv = 2; |
|
|
|
|
123 |
break; |
|
|
|
|
124 |
|
|
|
|
|
125 |
case S3C2440_CLKDIVN_HDIVN_4_8: |
|
|
|
|
126 |
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; |
|
|
|
|
127 |
break; |
|
|
|
|
128 |
|
|
|
|
|
129 |
case S3C2440_CLKDIVN_HDIVN_3_6: |
|
|
|
|
130 |
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; |
|
|
|
|
131 |
break; |
|
|
|
|
132 |
} |
|
|
|
|
133 |
|
|
|
|
|
134 |
return get_FCLK() / hdiv; |
|
|
|
|
135 |
#else |
|
|
|
|
|
||||
|
137 |
#endif |
+- |
|
|
2.12 usb_ohci.c
cpu/arm/arm920t/s3c24x0
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\cpu\arm920t\s3c24x0\usb_ohci.c
Right file: Z:\work\origin\u-boot-1.1.6\cpu\arm920t\s3c24x0\usb_ohci.c
|
47 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
48 |
#include |
|
|
|
2.13 interrupts.c
cpu/arm/arm920t/s3c24x0
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\cpu\arm920t\s3c24x0\interrupts.c
Right file: Z:\work\origin\u-boot-1.1.6\cpu\arm920t\s3c24x0\interrupts.c
|
33 |
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) || defined(CONFIG_S3C2440) |
<> |
33 |
#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) |
|
|
||||
|
40 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
41 |
#include |
|
|
|
|
|
||||
|
183 |
defined(CONFIG_FL2440) || \ |
+- |
|
|
2.14 i2c.c
cpu/arm/arm920t/s3c24x0
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\cpu\arm920t\s3c24x0\i2c.c
Right file: Z:\work\origin\u-boot-1.1.6\cpu\arm920t\s3c24x0\i2c.c
|
37 |
#elif defined(CONFIG_S3C2440) |
+- |
|
|
|
38 |
#include |
|
|
|
|
|
||||
|
67 |
|
<> |
65 |
|
|
68 |
#ifdef CONFIG_S3C2440 |
|
|
|
|
69 |
return (gpio->GPEDAT & 0x8000) >> 15; |
|
|
|
|
70 |
#endif |
|
|
|
|
|
||||
|
90 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
91 |
gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14; |
|
|
|
|
92 |
#endif |
|
|
|
|
|
||||
|
150 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
151 |
ulong old_gpecon = gpio->GPECON; |
|
|
|
|
152 |
#endif |
|
|
|
|
|
||||
|
161 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
162 |
/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ |
|
|
|
|
163 |
gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000; |
|
|
|
|
164 |
#endif |
|
|
|
|
|
||||
|
189 |
#ifdef CONFIG_S3C2440 |
+- |
|
|
|
190 |
gpio->GPECON = old_gpecon; |
|
|
|
|
191 |
#endif |
|
||
2.15 dm9000x.c
drivers
Mode: Differences
Left file: Z:\work\u-boot-1.1.6\drivers\dm9000x.c
Right file: Z:\work\origin\u-boot-1.1.6\drivers\dm9000x.c
|
266 |
DM9000_DBG("resetting DM9000A\n"); |
<> |
266 |
DM9000_DBG("resetting\n"); |
中运行
修改后，重新编译成功。
使用JLink Commander通过JLink下载到DRAM的0x33f80000地址后运行，串口有输出如下：
|
U-Boot 1.1.6 (Jun 2 2011 - 20:38:32)
DRAM: 64 MB
Flash: 512 kB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
FL2440 #
FL2440 # ?
? - alias for 'help'
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
bootvx - Boot vxWorks from an ELF image
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
date - get/set/reset date & time
dcache - enable or disable data cache
echo - echo args to console
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
icache - enable or disable instruction cache
iminfo - print header information for application image
imls - list all images found in flash
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
tftpboot- boot image via network using TFTP protocol
version - print monitor version
FL2440 # version
U-Boot 1.1.6 (Jun 2 2011 - 20:38:32)
FL2440 # FL2440 # date
Date: 2005-07-08 (unknown day) Time: 13:12:04
FL2440 # printenv
bootdelay=3
baudrate=115200
ipaddr=10.0.0.110
serverip=10.0.0.1
netmask=255.255.255.0
stdin=serial
stdout=serial
stderr=serial
Environment size: 127/65532 bytes |
先跑通了再说。
