Madplay音乐播放器移植到TQ2440

一、编译环境及库文件

linux环境：ubuntu-10.10
交叉编译：4.3.3
arm板子：tq2440

zlib-1.2.7.tar.gz
libid3tag-0.15.1b.tar.gz
libmad-0.15.1b.tar.gz
madplay-0.15.2b.tar.gz


二、madplayer移植

1、交叉编译zlib

# CC=arm-linux-gcc ./configure --prefix=/opt/EmbedSky/4.3.3/arm-none-linux-gnueabi --shared
# make
# make install

2、交叉编译libid3tag

# ./configure CC=arm-linux-gcc --host=arm-linux --disable-shared --enable-static --prefix=/opt/EmbedSky/4.3.3/arm-none-linux-gnueabi
# make
# make install

3、交叉编译libmad

#./configure CC=arm-linux-gcc --host=arm-linux --disable-shared --enable-static --prefix=/opt/EmbedSky/4.3.3/arm-none-linux-gnueabi
# make
出现错误：
cc1: error: unrecognized command line option "-fforce-mem"
make[2]: *** [version.lo] Error 1

解决方法：将Makefile中的"-fforce-mem"选项去掉

# make
# make install

4、编译madplay-0.15.2b.tar.gz

# ./configure CC=arm-linux-gcc --host=arm-linux --disable-shared --enable-static --prefix=/opt/EmbedSky/4.3.3/arm-none-linux-gnueabi
#make