Chinaunix首页 | 论坛 | 博客
  • 博客访问: 3504
  • 博文数量: 1
  • 博客积分: 0
  • 博客等级: 民兵
  • 技术积分: 10
  • 用 户 组: 普通用户
  • 注册时间: 2013-08-13 14:16
文章分类
文章存档

2013年(1)

我的朋友
最近访客

分类: LINUX

2013-08-13 14:41:28

网上关于最新内核移植相关的文章几乎找不到。最新的似乎只有“友善之臂”针对mini2440移植2.6.32.2文档,不能照搬在俺的杂牌板上。特意下 载了最新的稳定版本的内核linux-2.6.36,在俺的s3c2440开发板上试试。其中用到了”友善之臂“提供的编译器:ARM-Linux GCC 4.3.2和根文件系统:Rootfs-Qtopia-Qt4。下面是过程的大概。

1.解压进入原码顶层目录linux-2.6.36,修改Makefile文件
 
          "ARCH ?= arm"
           "CROSS_COMPILE ?= /usr/local/arm/4.3.2/bin/arm-linux-"
2. 将原有的arch/arm/mach-s3c2440/mach-mini2440.c删除,将arch/arm/mach-s3c2440/mach- smdk2440.c复制一份,命名为mach-mini2440.c,放在相同的目录下。修改三处mach-mini2440.c的内容先:
 1>MACHINE_START(S3C2440, "SMDK2440") ==> MACHINE_START(MINI2440, "MINI2440")
 2>s3c24xx_init_clocks(16934400) ==> s3c24xx_init_clocks(12000000)
 3>将"smdk_machine_init();"注释掉,否则链接会报错.

3.修改机器码:将”arch/arm/tools/mach-types“文件中的mini2440相关的机器码改成自己的开发板的机器码,俺的改成:“mini2440        MACH_MINI2440       MINI2440        5244

4make mini2440_defconfig;make;ok可以启动试一下了。由于不同于mini2440开发板,硬件配置不同,启动后错误很多。搭建开发环境,先不理它。

开发环境必须的网卡驱动。”友善之臂“的mini2440开发板用的是DM9000的网卡,俺的开发板用的是cs8900的网卡。只能“google+自力更生”了。

5.将准备好的cs8900.c/cs8900.h两个文件复制到drivers/net/arm目录下

6.在include/net/目录下创建文件smdk2410.h,并添加如下代码:
  #define pSMDK2410_ETH_IO        __phys_to_pfn(0x19000000)
  #define vSMDK2410_ETH_IO        0xE0000000
  #define SMDK2410_EHT_IRQ        IRQ_EINT9

7.在arch/arm/mach-s3c2440/mach-mini2440.c中加入"include "
在struct map_desc smdk2440_iodesc[]中添加cs8900相应的io空间映射:
   {vSMDK2410_ETH_IO, pSMDK2410_ETH_IO, SZ_1M, MT_DEVICE}

8.在drivers/net/arm/目录下的Makefile中加入cs8900相关项:
    obj-$(CONFIG_ARM_CS8900)    += cs8900.o
 在drivers/net/arm/目录下的Kconfig中加入cs8900相关项:
config ARM_CS8900
    tristate "CS8900 support"
    depends on NET_ETHERNET && ARM && (ARCH_SMDK2410 || ARCH_ZL2440 || MACH_MINI2440)
    help
      Support for CS8900A chipset based Ethernet cards. If you have a
      network (Ethernet) card of this type, say Y and read the
      Ethernet-HOWTO, available from
      < as well as .
   
      To compile this driver as a module, choose M here and read
      .  The module will be called   

8.make menuconfig选中cs8900选项,去掉dm9000选项。

9.make 之后可以启动了。

下面说一下内核中网卡和cs8900驱动相关的话题:
由于内核更新后,struct net_device结构体及相关宏定义有变化,或造成在2.6.16/2.6.22/2.6.24内核工作的cs8900驱动在2.6.36上不能编译通过。主要修改如下:
    1>"IRQT_RISING"改成"IRQ_TYPE_EDGE_RISING"
    2>2.6.36内核的net_device中没有“priv“和"mc_list"项”。代码都要作相应修改。
    3>以前内核(2.6.16/2.6.22/2.6.24)struct net_device中的函数指针域在2.6.36中都放在struct net_device_ops类型的指针netdev_ops指向的结构体中。也要作相应修改。


附件是修改后的cs8900.c和cs8900.h文件。
文件传不上来。贴上吧。
下面是cs8900.c文件:



 
#define VERSION_STRING "Cirrus Logic CS8900A driver for Linux (Modified for ZL2440)"





#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/version.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/irq.h>
//#include

#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>

// Added BSt

#include <asm/mach-types.h>



//#ifdef CONFIG_ARCH_SMDK2410

#if 1
//#include "asm/arch-s3c2410/regs-irq.h"

#include "mach/regs-mem.h"
//#include "asm/arch/smdk2410.h"

#include "net/smdk2410.h"

#endif

#include "cs8900.h"

//#define FULL_DUPLEX

//#define DEBUG


typedef struct {
    struct net_device_stats stats;
    u16 txlen;
    int char_devnum;

        spinlock_t lock;
} cs8900_t;

int cs8900_probe (struct net_device *dev);
static struct net_device *cs8900_dev ;



#define MAX_EEPROM_SIZE        256





static inline u16 cs8900_read (struct net_device *dev,u16 reg)
{
    outw (reg,dev->base_addr + PP_Address);
    return (inw (dev->base_addr + PP_Data));
}

static inline void cs8900_write (struct net_device *dev,u16 reg,u16 value)
{
    outw (reg,dev->base_addr + PP_Address);
    outw (value,dev->base_addr + PP_Data);
}

static inline void cs8900_set (struct net_device *dev,u16 reg,u16 value)
{
    cs8900_write (dev,reg,cs8900_read (dev,reg) | value);
}

static inline void cs8900_clear (struct net_device *dev,u16 reg,u16 value)
{
    cs8900_write (dev,reg,cs8900_read (dev,reg) & ~value);
}

static inline void cs8900_frame_read (struct net_device *dev,struct sk_buff *skb,u16 length)
{
    insw (dev->base_addr,skb_put (skb,length),(length + 1) / 2);
}

static inline void cs8900_frame_write (struct net_device *dev,struct sk_buff *skb)
{
    outsw (dev->base_addr,skb->data,(skb->len + 1) / 2);
}



#ifdef DEBUG
static inline int printable (int c)
{
    return ((c >= 32 && c <= 126) ||
            (c >= 174 && c <= 223) ||
            (c >= 242 && c <= 243) ||
            (c >= 252 && c <= 253));
}

static void dump16 (struct net_device *dev,const u8 *s,size_t len)
{
    int i;
    char str[128];

    if (!len) return;

    *str = '\0';

    for (i = 0; i < len; i++) {
        if (i && !(i % 4)) strcat (str," ");
        sprintf (str,"%s%.2x ",str,s[i]);
    }

    for ( ; i < 16; i++) {
        if (i && !(i % 4)) strcat (str," ");
        strcat (str," ");
    }

    strcat (str," ");
    for (i = 0; i < len; i++) sprintf (str,"%s%c",str,printable (s[i]) ? s[i] : '.');

    printk (KERN_DEBUG "%s: %s\n",dev->name,str);
}

static void hexdump (struct net_device *dev,const void *ptr,size_t size)
{
    const u8 *s = (u8 *) ptr;
    int i;
    for (i = 0; i < size / 16; i++, s += 16) dump16 (dev,s,16);
    dump16 (dev,s,size % 16);
}

static void dump_packet (struct net_device *dev,struct sk_buff *skb,const char *type)
{
    printk (KERN_INFO "%s: %s %d byte frame %.2x:%.2x:%.2x:%.2x:%.2x:%.2x to %.2x:%.2x:%.2x:%.2x:%.2x:%.2x type %.4x\n",
            dev->name,
            type,
            skb->len,
            skb->data[0],skb->data[1],skb->data[2],skb->data[3],skb->data[4],skb->data[5],
            skb->data[6],skb->data[7],skb->data[8],skb->data[9],skb->data[10],skb->data[11],
            (skb->data[12] << 8) | skb->data[13]);
    if (skb->len < 0x100) hexdump (dev,skb->data,skb->len);
}


#endif    



static void cs8900_receive (struct net_device *dev)
{
    
//cs8900_t *priv = (cs8900_t *) dev->priv;

    cs8900_t *priv = (cs8900_t *)netdev_priv(dev);
    struct sk_buff *skb;
    u16 status,length;

    status = cs8900_read (dev,PP_RxStatus);
    length = cs8900_read (dev,PP_RxLength);

    if (!(status & RxOK)) {
        priv->stats.rx_errors++;
        if ((status & (Runt | Extradata))) priv->stats.rx_length_errors++;
        if ((status & CRCerror)) priv->stats.rx_crc_errors++;
        return;
    }

    if ((skb = dev_alloc_skb (length + 4)) == NULL) {
        priv->stats.rx_dropped++;
        return;
    }

    skb->dev = dev;
    skb_reserve (skb,2);

    cs8900_frame_read (dev,skb,length);

#ifdef FULL_DUPLEX
    dump_packet (dev,skb,"recv");
#endif    

    skb->protocol = eth_type_trans (skb,dev);

    netif_rx (skb);
    dev->last_rx = jiffies;

    priv->stats.rx_packets++;
    priv->stats.rx_bytes += length;
}

static int cs8900_send_start (struct sk_buff *skb,struct net_device *dev)
{
    
//cs8900_t *priv = (cs8900_t *) dev->priv;

    cs8900_t *priv = (cs8900_t *)netdev_priv(dev);
    u16 status;

    spin_lock_irq(&priv->lock);
    netif_stop_queue (dev);

    cs8900_write (dev,PP_TxCMD,TxStart (After5));
    cs8900_write (dev,PP_TxLength,skb->len);

    status = cs8900_read (dev,PP_BusST);

    if ((status & TxBidErr)) {
        spin_unlock_irq(&priv->lock);
        printk (KERN_WARNING "%s: Invalid frame size %d!\n",dev->name,skb->len);
        priv->stats.tx_errors++;
        priv->stats.tx_aborted_errors++;
        priv->txlen = 0;
        return (1);
    }

    if (!(status & Rdy4TxNOW)) {
        spin_unlock_irq(&priv->lock);
        printk (KERN_WARNING "%s: Transmit buffer not free!\n",dev->name);
        priv->stats.tx_errors++;
        priv->txlen = 0;
        
        return (1);
    }

    cs8900_frame_write (dev,skb);
    spin_unlock_irq(&priv->lock);

#ifdef DEBUG
    dump_packet (dev,skb,"send");
#endif    

    dev->trans_start = jiffies;

    dev_kfree_skb (skb);

    priv->txlen = skb->len;

    return (0);
}

static irqreturn_t cs8900_interrupt (int irq,void *id)
{
    struct net_device *dev = (struct net_device *) id;
    cs8900_t *priv;
    volatile u16 status;
     irqreturn_t handled = 0;

#if 0
    if (dev->priv == NULL) {
        printk (KERN_WARNING "%s: irq %d for unknown device.\n",dev->name,irq);
        return 0;
    }
#endif

    
//priv = (cs8900_t *) dev->priv;

    priv = (cs8900_t *)netdev_priv(dev);
    
    while ((status = cs8900_read (dev, PP_ISQ))) {
        handled = 1;
        switch (RegNum (status)) {
        case RxEvent:
            cs8900_receive (dev);
            break;

        case TxEvent:
            priv->stats.collisions += ColCount (cs8900_read (dev,PP_TxCOL));
            if (!(RegContent (status) & TxOK)) {
                priv->stats.tx_errors++;
                if ((RegContent (status) & Out_of_window)) priv->stats.tx_window_errors++;
                if ((RegContent (status) & Jabber)) priv->stats.tx_aborted_errors++;
                break;
            } else if (priv->txlen) {
                priv->stats.tx_packets++;
                priv->stats.tx_bytes += priv->txlen;
            }
            priv->txlen = 0;
            netif_wake_queue (dev);
            break;

        case BufEvent:
            if ((RegContent (status) & RxMiss)) {
                u16 missed = MissCount (cs8900_read (dev,PP_RxMISS));
                priv->stats.rx_errors += missed;
                priv->stats.rx_missed_errors += missed;
            }
            if ((RegContent (status) & TxUnderrun)) {
                priv->stats.tx_errors++;
                priv->stats.tx_fifo_errors++;

                priv->txlen = 0;
                netif_wake_queue (dev);
            }
            
            break;

        case TxCOL:
            priv->stats.collisions += ColCount (cs8900_read (dev,PP_TxCOL));
            break;

        case RxMISS:
            status = MissCount (cs8900_read (dev,PP_RxMISS));
            priv->stats.rx_errors += status;
            priv->stats.rx_missed_errors += status;
            break;
        }
    }
    return IRQ_RETVAL(handled);
}

static void cs8900_transmit_timeout (struct net_device *dev)
{
    
//cs8900_t *priv = (cs8900_t *) dev->priv;

    cs8900_t *priv = (cs8900_t *)netdev_priv(dev);
    priv->stats.tx_errors++;
    priv->stats.tx_heartbeat_errors++;
    priv->txlen = 0;
    netif_wake_queue (dev);
}

static int cs8900_start (struct net_device *dev)
{
    int result;

    
//set_irq_type(dev->irq, IRQT_RISING);

    set_irq_type(dev->irq, IRQ_TYPE_EDGE_RISING);

    
    cs8900_set (dev,PP_RxCFG,RxOKiE | BufferCRC | CRCerroriE | RuntiE | ExtradataiE);
    cs8900_set (dev,PP_RxCTL,RxOKA | IndividualA | BroadcastA);
    cs8900_set (dev,PP_TxCFG,TxOKiE | Out_of_windowiE | JabberiE);
    cs8900_set (dev,PP_BufCFG,Rdy4TxiE | RxMissiE | TxUnderruniE | TxColOvfiE | MissOvfloiE);
    cs8900_set (dev,PP_LineCTL,SerRxON | SerTxON);
    cs8900_set (dev,PP_BusCTL,EnableRQ);

#ifdef FULL_DUPLEX
    cs8900_set (dev,PP_TestCTL,FDX);
#endif    
    udelay(200);    
    
    if ((result = request_irq (dev->irq, &cs8900_interrupt, 0, dev->name, dev)) < 0) {
        printk (KERN_ERR "%s: could not register interrupt %d\n",dev->name, dev->irq);
        return (result);
    }
    
    
    netif_start_queue (dev);

    return (0);
}

static int cs8900_stop (struct net_device *dev)
{
    
    cs8900_write (dev,PP_BusCTL,0);
    cs8900_write (dev,PP_TestCTL,0);
    cs8900_write (dev,PP_SelfCTL,0);
    cs8900_write (dev,PP_LineCTL,0);
    cs8900_write (dev,PP_BufCFG,0);
    cs8900_write (dev,PP_TxCFG,0);
    cs8900_write (dev,PP_RxCTL,0);
    cs8900_write (dev,PP_RxCFG,0);

    
    free_irq (dev->irq,dev);

    
    netif_stop_queue (dev);

    return (0);
}

static struct net_device_stats *cs8900_get_stats (struct net_device *dev)
{
    
//cs8900_t *priv = (cs8900_t *) dev->priv;

    cs8900_t *priv = (cs8900_t *)netdev_priv(dev);
    return (&priv->stats);
}

static void cs8900_set_receive_mode (struct net_device *dev)
{
    if ((dev->flags & IFF_PROMISC))
        cs8900_set (dev,PP_RxCTL,PromiscuousA);
    else
        cs8900_clear (dev,PP_RxCTL,PromiscuousA);

    
//if ((dev->flags & IFF_ALLMULTI) && dev->mc_list)

    if ((dev->flags & IFF_ALLMULTI) && !netdev_mc_empty(dev))
        cs8900_set (dev,PP_RxCTL,MulticastA);
    else
        cs8900_clear (dev,PP_RxCTL,MulticastA);
}




int __init cs8900_probe (struct net_device *dev)
{
    static cs8900_t *priv;
    int i,result;
    u16 value;

    printk (VERSION_STRING"\n");

    memset (&priv,0,sizeof (cs8900_t));

    
//+kevin

    __raw_writel(0x2211d110,S3C2410_BWSCON);
    __raw_writel(0x1f7c,S3C2410_BANKCON3);



//#if defined(CONFIG_ARCH_SMDK2410)

#if 1
    dev->dev_addr[0] = 0x00;
    dev->dev_addr[1] = 0x00;
    dev->dev_addr[2] = 0x3e;
    dev->dev_addr[3] = 0x26;
    dev->dev_addr[4] = 0x0a;
    dev->dev_addr[5] = 0x00;

#endif

    dev->if_port = IF_PORT_10BASET;
    
//dev->priv = (void *) &priv;

    priv = (cs8900_t *)netdev_priv(dev);
    spin_lock_init(&priv->lock);

    
//hejiasheng SET_MODULE_OWNER (dev);



//#if defined(CONFIG_ARCH_SMDK2410)

#if 1
    dev->base_addr = vSMDK2410_ETH_IO + 0x300;
    dev->irq = IRQ_EINT9;
    printk("debug:[%s-%d]\n", __func__, __LINE__);
#endif

    if ((result = check_mem_region (dev->base_addr, 16))) {
        printk (KERN_ERR "%s: can't get I/O port address 0x%lx\n",dev->name,dev->base_addr);
        return (result);
    }
    request_mem_region (dev->base_addr, 16, dev->name);
    
    printk("debug:[%s-%d]\n", __func__, __LINE__);
     
    if ((value = cs8900_read (dev,PP_ProductID)) != EISA_REG_CODE) {
        printk (KERN_ERR "%s: incorrect signature 0x%.4x\n",dev->name,value);
        return (-ENXIO);
    }
    printk("debug:[%s-%d]\n", __func__, __LINE__);

    
    value = cs8900_read (dev,PP_ProductID + 2);
    if (VERSION (value) != CS8900A) {
        printk (KERN_ERR "%s: unknown chip version 0x%.8x\n",dev->name,VERSION (value));
        return (-ENXIO);
    }
    
    cs8900_write (dev,PP_IntNum,0);


    printk (KERN_INFO "%s: CS8900A rev %c at %#lx irq=%d",
        dev->name,'B' + REVISION (value) - REV_B, dev->base_addr, dev->irq);

    for (i = 0; i < ETH_ALEN; i += 2)
        cs8900_write (dev,PP_IA + i,dev->dev_addr[i] | (dev->dev_addr[i + 1] << 8));

    printk (", addr:");
    for (i = 0; i < ETH_ALEN; i += 2)
    {
        u16 mac = cs8900_read (dev,PP_IA + i);
        printk ("%cX:%2X", (i==0)?' ':':', mac & 0xff, (mac >> 8));
    }
    printk ("\n");

    return (0);
}


static const struct net_device_ops net_ops = {
    .ndo_init = cs8900_probe,
    .ndo_open        = cs8900_start,
    .ndo_stop        = cs8900_stop,
    .ndo_tx_timeout        = cs8900_transmit_timeout,
    .ndo_start_xmit     = cs8900_send_start,
    .ndo_get_stats        = cs8900_get_stats,
    .ndo_set_multicast_list = cs8900_set_receive_mode,
#if 0
    .ndo_set_mac_address     = set_mac_address,
    .ndo_poll_controller    = net_poll_controller,
    .ndo_change_mtu        = eth_change_mtu,
    .ndo_validate_addr    = eth_validate_addr,
#endif
};


static int __init cs8900_init (void)
{
    struct net_device *ndev;

    ndev = alloc_etherdev(sizeof (cs8900_t));
    if (!ndev) {
        printk("%s: could not allocate device.\n", "cs8900");
        return -ENOMEM;
    }
    printk("allocate cs8900 device ok.\n");

    cs8900_dev = ndev;
    
//cs8900_dev->init = cs8900_probe;

    ether_setup (ndev);
#if 0
    ndev->open = cs8900_start;
    ndev->stop = cs8900_stop;
    ndev->hard_start_xmit = cs8900_send_start;
    ndev->get_stats = cs8900_get_stats;
    ndev->set_multicast_list = cs8900_set_receive_mode;
    ndev->tx_timeout = cs8900_transmit_timeout;
#endif
    ndev->netdev_ops = &net_ops;
    ndev->watchdog_timeo = HZ;



    return (register_netdev (cs8900_dev));
}

static void __exit cs8900_cleanup (void)
{
//    cs8900_t *priv = (cs8900_t *) cs8900_dev->priv;

    cs8900_t *priv = (cs8900_t *)netdev_priv(cs8900_dev);
    if( priv->char_devnum)
    {
        unregister_chrdev(priv->char_devnum,"cs8900_eeprom");
    }
    release_mem_region (cs8900_dev->base_addr,16);
    unregister_netdev (cs8900_dev);
}

MODULE_AUTHOR ("Abraham van der Merwe ");
MODULE_DESCRIPTION (VERSION_STRING);
MODULE_LICENSE ("GPL");

module_init (cs8900_init);
module_exit (cs8900_cleanup);



以下是cs8900.h


#ifndef CS8900_H
#define CS8900_H





#define PP_Address        0x0a    
#define PP_Data            0x0c    



#define PP_ProductID        0x0000    
#define PP_MemBase            0x002c    
#define PP_IntNum            0x0022    
#define PP_EEPROMCommand    0x0040    
#define PP_EEPROMData        0x0042    
#define PP_RxCFG            0x0102    
#define PP_RxCTL            0x0104    
#define PP_TxCFG            0x0106    
#define PP_BufCFG            0x010a    
#define PP_LineCTL            0x0112    
#define PP_SelfCTL            0x0114    
#define PP_BusCTL            0x0116    
#define PP_TestCTL            0x0118    
#define PP_ISQ                0x0120    
#define PP_TxEvent            0x0128    
#define PP_BufEvent            0x012c    
#define PP_RxMISS            0x0130    
#define PP_TxCOL            0x0132    
#define PP_SelfST            0x0136    
#define PP_BusST            0x0138    
#define PP_TxCMD            0x0144    
#define PP_TxLength            0x0146    
#define PP_IA                0x0158    
#define PP_RxStatus            0x0400    
#define PP_RxLength            0x0402    
#define PP_RxFrame            0x0404    
#define PP_TxFrame            0x0a00    




#define INTRQ0            0x0000
#define INTRQ1            0x0001
#define INTRQ2            0x0002
#define INTRQ3            0x0003


#define EISA_REG_CODE    0x630e
#define REVISION(x)        (((x) & 0x1f00) >> 8)
#define VERSION(x)        ((x) & ~0x1f00)

#define CS8900A            0x0000
#define REV_B            7
#define REV_C            8
#define REV_D            9


#define Skip_1            0x0040
#define StreamE            0x0080
#define RxOKiE            0x0100
#define RxDMAonly        0x0200
#define AutoRxDMAE        0x0400
#define BufferCRC        0x0800
#define CRCerroriE        0x1000
#define RuntiE            0x2000
#define ExtradataiE        0x4000


#define IAHashA            0x0040
#define PromiscuousA    0x0080
#define RxOKA            0x0100
#define MulticastA        0x0200
#define IndividualA        0x0400
#define BroadcastA        0x0800
#define CRCerrorA        0x1000
#define RuntA            0x2000
#define ExtradataA        0x4000


#define Loss_of_CRSiE    0x0040
#define SQErroriE        0x0080
#define TxOKiE            0x0100
#define Out_of_windowiE    0x0200
#define JabberiE        0x0400
#define AnycolliE        0x0800
#define T16colliE        0x8000


#define SWint_X            0x0040
#define RxDMAiE            0x0080
#define Rdy4TxiE        0x0100
#define TxUnderruniE    0x0200
#define RxMissiE        0x0400
#define Rx128iE            0x0800
#define TxColOvfiE        0x1000
#define MissOvfloiE        0x2000
#define RxDestiE        0x8000


#define SerRxON            0x0040
#define SerTxON            0x0080
#define AUIonly            0x0100
#define AutoAUI_10BT    0x0200
#define ModBackoffE        0x0800
#define PolarityDis        0x1000
#define L2_partDefDis    0x2000
#define LoRxSquelch        0x4000


#define RESET            0x0040
#define SWSuspend        0x0100
#define HWSleepE        0x0200
#define HWStandbyE        0x0400
#define HC0E            0x1000
#define HC1E            0x2000
#define HCB0            0x4000
#define HCB1            0x8000


#define ResetRxDMA        0x0040
#define DMAextend        0x0100
#define UseSA            0x0200
#define MemoryE            0x0400
#define DMABurst        0x0800
#define IOCHRDYE        0x1000
#define RxDMAsize        0x2000
#define EnableRQ        0x8000


#define DisableLT        0x0080
#define ENDECloop        0x0200
#define AUIloop            0x0400
#define DisableBackoff    0x0800
#define FDX                0x4000


#define RegNum(x) ((x) & 0x3f)
#define RegContent(x) ((x) & ~0x3d)

#define RxEvent            0x0004
#define TxEvent            0x0008
#define BufEvent        0x000c
#define RxMISS            0x0010
#define TxCOL            0x0012


#define IAHash            0x0040
#define Dribblebits        0x0080
#define RxOK            0x0100
#define Hashed            0x0200
#define IndividualAdr    0x0400
#define Broadcast        0x0800
#define CRCerror        0x1000
#define Runt            0x2000
#define Extradata        0x4000

#define HashTableIndex(x) ((x) >> 0xa)


#define After5            0
#define After381        1
#define After1021        2
#define AfterAll        3
#define TxStart(x) ((x) << 6)

#define Force            0x0100
#define Onecoll            0x0200
#define InhibitCRC        0x1000
#define TxPadDis        0x2000


#define TxBidErr        0x0080
#define Rdy4TxNOW        0x0100


#define Loss_of_CRS        0x0040
#define SQEerror        0x0080
#define TxOK            0x0100
#define Out_of_window    0x0200
#define Jabber            0x0400
#define T16coll            0x8000

#define TX_collisions(x) (((x) >> 0xb) & ~0x8000)


#define SWint            0x0040
#define RxDMAFrame        0x0080
#define Rdy4Tx            0x0100
#define TxUnderrun        0x0200
#define RxMiss            0x0400
#define Rx128            0x0800
#define RxDest            0x8000


#define MissCount(x) ((x) >> 6)


#define ColCount(x) ((x) >> 6)


#define T3VActive        0x0040
#define INITD            0x0080
#define SIBUSY            0x0100
#define EEPROMpresent    0x0200
#define EEPROMOK        0x0400
#define ELpresent        0x0800
#define EEsize            0x1000


#define EEWriteEnable 0x00F0
#define EEWriteDisable 0x0000
#define EEWriteRegister    0x0100
#define EEReadRegister    0x0200
#define EEEraseRegister    0x0300
#define ELSEL            0x0400

#endif 


阅读(338) | 评论(0) | 转发(0) |
0

上一篇:没有了

下一篇:没有了

给主人留下些什么吧!~~