Epson me1+ (china only)
Color inkjet printer, works Perfectly
Recommended driver: Epson Stylus C46
Generic instructions for: CUPS, LPD, LPRng, PPR, PDQ, no spooler
User-contributed Printer Entry
This printer entry is not yet included in the Foomatic packages and the data on this page is not verified or proofread. This entry can be edited by everyone.
Edit this printer
Add a similar printer
Notes
This printer basically doesn't work with linux and according to the local suppliers will NEVER work with linux. The best I could manage was to get the paper streaming thru ie non-stop, by calling it a different model - "new stylus". I tried 'foo2zjs' after 'gutenprint' which was the closest to this model. no luck. gave up after 2 weeks.
It works just fine. Use CUPS, Epson Stylus C46 Foomatic/gutenprint-ijs.5.0. Very good printing and cheap non-Epson refills.
Discussion forum
Look for help in our forum for printers from Epson.
Miscellaneous
Printer does not support PJL.
Refill: colour and b&w run about 3 GBP here
No known autodetection signatures.
Drivers
The following driver(s) are known to drive this printer:
Recommended driver:
Epson Stylus C46
Epson Stylus C46 Foomatic/gutenprint-ijs.5.0
--------------------next---------------------
阅读(344) | 评论(0) | 转发(0) |
