Chinaunix首页 | 论坛 | 博客
  • 博客访问: 939411
  • 博文数量: 119
  • 博客积分: 6248
  • 博客等级: 准将
  • 技术积分: 1419
  • 用 户 组: 普通用户
  • 注册时间: 2008-08-08 14:14
文章分类

全部博文(119)

文章存档

2014年(1)

2012年(1)

2011年(2)

2010年(22)

2009年(81)

2008年(12)

分类: LINUX

2009-09-16 16:59:07

今天在网上溜达,发现了这个nload查看流量的小工具,于是就在本地安装了一个看看效果,我下载的是nload-0.7.2.tar.gz版本的,下载地址:
 
#tar zxvf nload-0.7.2.tar.gz
#cd nload-0.7.2
#./configure --prefix=/usr/local/nload && make && make install
 
安装好以后,来看看效果
 
#/usr/local/nload/bin/nload
 
Device eth0 [192.168.100.210] (1/13):
===================================================================================
Incoming:
 
                                                                                                                        Curr: 31.23 kBit/s
                                                                                                                        Avg: 95.94 kBit/s
                                                                                                                        Min: 0.89 Bit/s
                                                                                                                        Max: 0.54 kBit/s
                                     Ttl: 2.41 GByte
                                                                                   
Outgoing:
 
 
                                     Curr: 41.34 kBit/s
                                                                                                                        Avg: 82.34 kBit/s
                                                                                                                        Min: 7.41 kBit/s
                                                                                                                        Max: 0.30 kBit/s
                                     Ttl: 3.84 GByte
 
可以看到他可以监控到输出和输入的流量,感觉还不错,呵呵,完全可以用到流量监控报警机制上,那个就是要看你的脚本功底了 哈哈.
 
阅读(2425) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~