分类:
2009-11-08 09:51:15
Be sure the automobile is not in gear. For safety, the car should be in neutral. (The gear stick will be in the middle/up position. Not pointed in any other direction)
Press down the emergency brake. (This will keep you from rolling if you are on a hill. Stick shifts roll easily)
Press the clutch down to the floor. (The clutch is located to the left the break)
With the cluth pressed to the floor and emergency brake on, crank the automobile.
With your foot on the clutch and the brake, release the emergency brake.
(backing) Press down on your gear shift to the direction of your reverse gear. (You will see an "R" for Reverse)
With your foot remaining onto the clutch, place your right foot onto the gas.
Slowly releasing your foot from the clutch, give automobile's gas pedal a light press.
In order to stop or slow your car, release your foot from the gas, pressing the clutch (first or simulataneously with the brake).
After you have backed, with your foot on the clutch and the brakeput automobile in first gear (you will see a 1 indicating 1st gear)
Move slowly from reverse, going back to neutral
Push forward (or backward depending upon where your 1st gear is located. You will see a 1 indicating 1st gear)
Gently press the gas, slowly releasing your foot from the clutch.
In order to change to the 2nd gear press the clutch down and pull the gear shift back into 2nd gear (2 indicating 2nd gear)
Gently press gas, releasing the clutch.
Change from 2nd to 3rd gear by pulling gear shift back, releasing the gas pedal and pressing the clutch.
In order to change to the 3rd gear (3 indicates 3rd gear), press cluch-gently releasing your foot from the gas pedal.
Continue to press clutch down to change to the next gear, releasing the gas pedal.
After changing gears, press gas pedal.
After you have have completed the last gear, press gas and release clutch.
You did it!! Drive as normal...
To downshift (or shift backwards) to slow down or to stop, use the clutch to change gears
When approaching a complete stop, press break simultaneous with brake.
After you come to a complete stop, repeat step 12 (1st gear) and follow remaining stesp until you have completed all gears.