Solaris10的安装

 

Solaris10的安装其实和8的安装相比，没有什么太多差别，但由于Solaris10支持建立Zone的新增功能，所以安装之前先应规划好，比如Global OS建立在那里，建立几个Zone，其中每个Zone建立在那些存储上，怎样指配系统资源等。

 

本文档中安装的机器为Sun Fire 480R，2个硬盘，4个CPU，8G内存。

 

安装规划为Global OS建立在c2t0d0上，另外建立3个Zone在c2t1d0上，Zone分别命名为omc_i_zone、

omc_r_zone、omc_s_zone。

ID NAME             STATUS         PATH                 IP

 0 global           running        /                                  10.12.100.66

 2 omc_i_zone       running        /data/omc_i_zone         10.12.100.67

 4 omc_r_zone       running        /data/omc_r_zone        10.12.100.68

 6 omc_s_zone       running        /data/omc_s_zone              10.12.100.69

 

由于服务器不带显卡，所以安装步骤是通过笔记本，用超级终端连上Server的方式来安装，即整个安装过程都在字符方式下进行。

 

对于安装过程中出现的问题，本文会通过说明的方式给以红色标注。

 

另外一个需要注意的地方是安装光盘分DVD光盘和普通安装光盘，DVD格式的话整个安装过程就一张盘（所以不会出现文档中的换盘的过程，本文档中使用的是普通安装光盘），而普通格式的为5张盘，分别为Installation、Software 1~3、Languages（这张盘可以不需要，因为整个应用环境为English）。

 

 

 

插入solaris 10引导光盘

 

{0} ok状态下键入boot cdrom回车

 

       ：笔记本没有STOP+A键，可通过连上原来OS（原来机器安装来Solaris8），键入halt进入OK状态。其实也应该通过笔记本组合键（如CTRL+BREAK）进入，但敲boot cdrom总提示boot command disable

 

Select a Language

 

   0. English

   1. French

   2. German

   3. Italian

   4. Japanese

   5. Korean

   6. Simplified Chinese

   7. Spanish

   8. Swedish

   9. Traditional Chinese

 

Please make a choice (0 - 9), or press h or ? for help: 键入0 回车

 

 

What type of terminal are you using?

 1) ANSI Standard CRT

 2) DEC VT52

 3) DEC VT100

 4) Heathkit 19

 5) Lear Siegler ADM31

 6) PC Console

 7) Sun Command Tool

 8) Sun Workstation

 9) Televideo 910

 10) Televideo 925

 11) Wyse Model 50

 12) X Terminal Emulator (xterms)

 13) CDE Terminal Emulator (dtterm)

 14) Other

Type the number of your choice and press Return: 键入3回车

 

键入F2进入下一步

键入F2

 

q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Specify Yes if the system is connected to the network by one of the Solaris

  or vendor network/communication Ethernet cards that are supported on the

  Solaris CD. See your hardware documentation for the current list of

  supported cards.

  Specify No if the system is connected to a network/communication card that

  is not supported on the Solaris CD, and follow the instructions listed under

  Help.

 

 

      Networked

      qqqqqqqqq

      [X] Yes

      [ ] No

 

 

 

键入F2

 

q DHCP for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Specify whether or not this network interface should use DHCP to configure

  itself.  Choose Yes if DHCP is to be used, or No if the network interface is

  to be configured manually.

 

  NOTE: DHCP support will not be enabled, if selected, until after the system

  reboots.

 

      Use DHCP for eri0

      qqqqqqqqqqqqqqqqq

      [ ] Yes

      [X] No

 

 

 

键入F2

q Host Name for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Enter the host name which identifies this system on the network.  The name

  must be unique within your domain; creating a duplicate host name will cause

  problems on the network after you install Solaris.

 

  A host name must be at least two characters; it can contain letters, digits,

  and minus signs (-).

 

 

    Host name for eri0: lcr01-04                       

 

键入F2

 

q IP Address for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Enter the Internet Protocol (IP) address for this network interface.  It

  must be unique and follow your site's address conventions, or a

  system/network failure could result.

 

  IP addresses contain four sets of numbers separated by periods (for example

  129.200.9.1).

 

 

    IP address for eri0: 键入10.12.100.66

 

键入F2

 

q Subnet for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must specify whether this system is part of a subnet.  If

  you specify incorrectly, the system will have problems communicating on the

  network after you reboot.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      System part of a subnet

      qqqqqqqqqqqqqqqqqqqqqqq

      [X] Yes

      [ ] No

 

键入F2 

 

q Netmask for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must specify the netmask of your subnet.  A default

  netmask is shown; do not accept the default unless you are sure it is

  correct for your subnet.  A netmask must contain four sets of numbers

  separated by periods (for example 255.255.255.0).

 

 

    Netmask for eri0 键入255.255.255.0 

 

 

键入F2

 

q IPv6 for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Specify whether or not you want to enable IPv6, the next generation Internet

  Protocol, on this network interface.  Enabling IPv6 will have no effect if

  this machine is not on a network that provides IPv6 service.  IPv4 service

  will not be affected if IPv6 is enabled.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Enable IPv6 for eri0

      qqqqqqqqqqqqqqqqqqqq

      [ ] Yes

      [X] No

 

 

键入F2

 

q Set the Default Route for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  To specify the default route, you can let the software try to detect one

  upon reboot, you can specify the IP address of the router, or you can choose

  None.  Choose None if you do not have a router on your subnet.

 

  > To make a selection, use the arrow keys to select your choice and press

  Return to mark it [X].

 

 

      Default Route for eri0

      qqqqqqqqqqqqqqqqqqqqqqqqqq

      [ ] Detect one upon reboot

      [X] Specify one

      [ ] None

 

 

 

 

键入F2

 

q Default Route IP Address for eri0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Enter the IP address of the default route. This entry will be placed in the

  /etc/defaultrouter file and will be the default route after you reboot

  (example 129.146.89.225).

 

 

 

    Router IP Address for eri0 键入10.12.100.1  

 

键入F2

 

键入F2

 

q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Specify Yes if the system will use the Kerberos security mechanism.

 

  Specify No if this system will use standard UNIX security.

 

      Configure Kerberos Security

      qqqqqqqqqqqqqqqqqqqqqqqqqqq

      [ ] Yes

      [X] No

 

 

键入F2

键入F2

 

q Name Service qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must provide name service information.  Select the name

  service that will be used by this system, or None if your system will either

  not use a name service at all, or if it will use a name service not listed

  here.

 

  > To make a selection, use the arrow keys to highlight the option

    and press Return to mark it [X].

 

 

      Name service

      qqqqqqqqqqqq

      [ ] NIS+

      [ ] NIS

      [ ] DNS

      [ ] LDAP

      [X] None

 

键入F2

键入F2

 

q Time Zone qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must specify your default time zone.  You can specify a

  time zone in three ways:  select one of the continents or oceans from the

  list, select other - offset from GMT, or other - specify time zone file.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Continents and Oceans

      qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  -   [ ] Africa

  x   [ ] Americas

  x   [ ] Antarctica

  x   [ ] Arctic Ocean

  x   [X] Asia

  x   [ ] Atlantic Ocean

  x   [ ] Australia

  x   [ ] Europe

  v   [ ] Indian Ocean

 

键入F2

 

q Country or Region qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Countries and Regions

      qqqqqqqqqqqqqqqqqqqqqqqq

  -   [ ] Afghanistan

  x   [ ] Armenia

  x   [ ] Azerbaijan

  x   [ ] Bahrain

  x   [ ] Bangladesh

  x   [ ] Bhutan

  x   [ ] Brunei

  x   [ ] Cambodia

  x   [X] China

  x   [ ] Cyprus

  x   [ ] East Timor

  x   [ ] Georgia

  v   [ ] Hong Kong

键入F2

 

q Date and Time qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  > Accept the default date and time or enter

    new values.

 

  Date and time: 2005-01-10 12:11

 

    Year   (4 digits) : 2005

    Month  (1-12)     : 01

    Day    (1-31)     : 10

    Hour   (0-23)     : 12

    Minute (0-59)     : 11

 

键入F2

键入F2

 

 

q Root Password qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Please enter the root password for this system.

 

  The root password may contain alphanumeric and special characters.  For

  security, the password will not be displayed on the screen as you type it.

 

  > If you do not want a root password, leave both entries blank.

 

 

    Root password: 键入 ****

    Root password:  键入****  

 

键入F2

 

 

键入 F2_Standard

 

q Eject a CD/DVD Automatically? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  During the installation of Solaris software, you may be using one or more

  CDs/DVDs. You can choose to have the system eject each CD/DVD automatically

  after it is installed or you can choose to manually eject each CD/DVD.

 

 

            [X] Automatically eject CD/DVD

            [ ] Manually eject CD/DVD

 

键入F2

 

q Reboot After Installation? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  After Solaris software is installed, the system must be rebooted. You can

  choose to have the system automatically reboot, or you can choose to

  manually reboot the system if you want to run scripts or do other

  customizations before the reboot.  You can manually reboot a system by using

  the reboot(1M) command.

 

 

            [ ] Auto Reboot

            [X] Manual Reboot

 

 

 

 

键入F2

 

q Solaris Interactive Installation qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  This system is upgradable, so there are two ways to install the Solaris

  software.

 

  The Upgrade option updates the Solaris software to the new release, saving

  as many modifications to the previous version of Solaris software as

  possible.  Back up the system before using the Upgrade option.

 

  The Initial option overwrites the system disks with the new version of

  Solaris software.  This option allows you to preserve any existing file

  systems.  Back up any modifications made to the previous version of Solaris

  software before starting the Initial option.

 

  After you select an option and complete the tasks that follow, a summary of

  your actions will be displayed.

 

!!键入 F4 Initial安装

 

键入 F2 Accept License

 

q Select Geographic Regions qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Select the geographic regions for which support should be installed.

 

  > [ ] Australasia

  V [/] Asia

    [ ]     Hindi UTF-8

    [ ]     Japanese EUC (ja)

    [ ]     Japanese PC Kanji (ja_JP.PCK)

    [ ]     Japanese UTF-8 (ja_JP.UTF-8)

    [ ]     Korean EUC

    [ ]     Korean UTF-8

    [ ]     Simplified Chinese EUC

    [ ]     Simplified Chinese GB18030

    [ ]     Simplified Chinese GBK

    [X]     Simplified Chinese UTF-8

    [ ]     Thai TIS620

    [ ]     Thai UTF-8

    [ ]     Traditional Chinese (Hong Kong) BIG5+HKSCS

    [ ]     Traditional Chinese (Hong Kong) UTF-8

 

   Locale is selected.  Press Return to deselect

 

键入F2

 

q Select System Locale qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Select the initial locale to be used after the system has been installed.

 

    [ ]     POSIX C ( C )

        Asia

    [X]     Simplified Chinese UTF-8 ( zh.UTF-8 )

 

键入F2

 

q Select Products qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Select the products you would like to install.

 

  > [ ] Solaris 10 Documentation........................    0.00 MB

  > [ ] Solaris 10 Extra Value Software.................    0.00 MB

  > [ ] Solaris Software Companion CD...................    0.00 MB

 

键入F2

 

q Additional Products qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  To scan for additional products, select the location you wish to scan.

  Products found at the selected location that are in a Web Start Ready

  install form will be added to the Products list.

 

  Web Start Ready product scan location:

 

 

      [X]  None

      [ ]  CD/DVD

      [ ]  Kiosk Download

      [ ]  Network File System

 

键入F2

 

q Select Software qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Select the Solaris software to install on the system.

 

  NOTE: After selecting a software group, you can add or remove software by

  customizing it. However, this requires understanding of software

  dependencies and how Solaris software is packaged.

 

      [ ]  Entire Distribution plus OEM support ....... 5114.00 MB

      [X]  Entire Distribution ........................ 5072.00 MB

      [ ]  Developer System Support ................... 4824.00 MB

      [ ]  End User System Support .................... 3869.00 MB

      [ ]  Core System Support ........................  869.00 MB

      [ ]  Reduced Networking Core System Support .....  830.00 MB

 

键入F2

 

q Select Disks qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must select the disks for installing Solaris software.

  Start by looking at the Suggested Minimum field; this value is the

  approximate space needed to install the software you've selected. Keep

  selecting disks until the Total Selected value exceeds the Suggested Minimum

  value.

  NOTE: ** denotes current boot disk

 

  Disk Device                                              Available Space

  =============================================================================

  [X] ** c1t0d0                                           69994 MB  (F4 to edit)

  [ ]    c1t1d0                                           69994 MB

 

                                     Total Selected:  69994 MB

                                  Suggested Minimum:   3908 MB

 

键入F2

 

q Preserve Data? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Do you want to preserve existing data? At least one of the disks you've

  selected for installing Solaris software has file systems or unnamed slices

  that you may want to save.

 

键入F2

 

q Automatically Layout File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Do you want to use auto-layout to automatically layout file systems?

  Manually laying out file systems requires advanced system administration

  skills.

 

键入F4自定义

 

 

q File System and Disk Layout qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  The summary below is your current file system and disk layout, based on the

  information you've supplied.

 

  NOTE: If you choose to customize, you should understand file systems, their

  intended purpose on the disk, and how changing them may affect the operation

  of the system.

 

      File sys/Mnt point Disk/Slice                                       Size

      ========================================================================

      overlap            c1t0d0s2                                   69994  

 

 

键入F4 自定义分区

 

 

q Customize Disk: c1t0d0 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  Boot Device: c1t0d0s0

 

  Entry: /opt                       Recommended:   15 MB     Minimum:    5 MB

================================================================================

  Slice  Mount Point                 Size (MB)

     0   /                                4099

     1   swap                             8193

     2   overlap                         69994

     3   /usr                             4099

     4   /var                             4099

     5   /opt                            49500

     6                                       0

     7                                       0

================================================================================

                         Capacity:       69994 MB

                        Allocated:       20490 MB

                   Rounding Error:           1 MB

                             Free:       49503 MB

 

 

 

qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

按上述参数设置好分区，可以自行设置。

F2_OK

 

键入F2

q Mount Remote File Systems? qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Do you want to mount software from a remote file server? This may be

  necessary if you had to remove software because of disk space problems.

 

键入F2

 

q Profile qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  The information shown below is your profile for installing Solaris software.

  It reflects the choices you've made on previous screens.

 

  ============================================================================

 

 -              Installation Option: Initial

 x                      Boot Device: c1t0d0

 x                  Client Services: None

 x

 x                          Locales: Simplified Chinese UTF-8

 x                    System Locale: Simplified Chinese UTF-8 ( zh.UTF-8

 x

 x                         Software: Solaris 10, Entire Distribution

 x

 x      File System and Disk Layout: /                   c1t0d0s0 4099 MB

 x                                   swap                c1t0d0s1 8193 MB

 x                                   /usr                c1t0d0s3 4099 MB

 x                                   /var                c1t0d0s4 4099 MB

 v                                   /opt                c1t0d0s5 49503 MB

 

键入F2

 

回车重启

 

       ：重启时注意将光盘取出来，否则又会从光盘安装启动（Solaris8好像不会这样）

 

Media:

 

1. CD/DVD

2. Network File System

3. Skip

 

   Media [1]:键入1

 

换盘回车

 

       ：实际安装过程中，开始并没有出现上述Media界面，后来在OK状态下敲boot才会重起出现上述界面

 

Product: Solaris 10 packages (part 2)

Location: /

Size: 1217.49 MB

-------------------------------------

     Solaris 10 packages (part 2)    1217.49 MB

Ready to Install

 

1. Install Now

2. Start Over

3. Exit Installation

 

   What would you like to do [1]?键入1

 

 

Solaris 10 packages (part 2)

|-1%--------------25%-----------------50%-----------------75%--------------100%|

 

   Pausing for 30 seconds at the "Summary" screen. The wizard will continue to

   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to

   continue. [c] c

 

Please specify the media from which you will install Solaris 10 Software 3

(SPARC Platform Edition).

 

Alternatively, choose the selection for "Skip" to skip this disc and go on to

the next one.

 

Media:

 

1. CD/DVD

2. Network File System

3. Skip

 

   Media [1]: 1

 

 

 

换盘回车

 

 

The following items will be installed:

 

Product: Solaris 10 packages (part 3)

Location: /

Size: 554.63 MB

-------------------------------------

     Solaris 10 packages (part 3)    554.63 MB

 

 

 

Ready to Install

 

1. Install Now

2. Start Over

3. Exit Installation

 

   What would you like to do [1]? 键入1

 

 

 

Media:

 

1. CD/DVD

2. Network File System

3. Skip

 

   Media [1]: 1

 

 

换盘回车

 

 

Product: Solaris 10 packages (part 4)

Location: /

Size: 774.08 MB

-------------------------------------

     Solaris 10 packages (part 4)    774.08 MB

 

 

 

Ready to Install

 

1. Install Now

2. Start Over

3. Exit Installation

 

   What would you like to do [1]?1

 

   What would you like to do [1]?

Solaris 10 packages (part 4)

|-1%--------------25%-----------------50%-----------------75%--------------100%|

 

   Pausing for 30 seconds at the "Summary" screen. The wizard will continue to

   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to

   continue. [c] c

 

 

Please specify the media from which you will install Solaris 10 Languages

(SPARC Platform Edition).

 

Alternatively, choose the selection for "Skip" to skip this disc and go on to

the next one.

 

Media:

 

1. CD/DVD

2. Network File System

3. Skip

 

   Media [1]: 3

 

{"!" exits}

 

 

重启动机器后，solaris主操作系统安装完成。

 

       ：实际修改/etc/default/login文件，注释掉CONSOLE行以使root可以远程登录

  Zone

 

开始安装zone

 

用root用户telnet到主机（10.12.100.66）

 

       ：在建立Zone之前，先将另外一块硬盘添加到主OS上，mount点为/data，具体过程不在此文档中赘述了。

 

在/data下建立权限为700的两个目录omc_i_zone、omc_r_zone、omc_s_zone。

 

 

       ：建立多个Zone可以通过编写脚本文件来实现，本文档讲述创建一个omc_i_zone的过程，其它仿照进行

 

配置omc_i_zone：

# zonecfg -z omc_i_zone

Omc_i_zone: No such zone configured

Use 'create' to begin configuring a new zone.

zonecfg:omc_i_zone> create

zonecfg:omc_i_zone> set zonepath=/data/omc_i_zone

zonecfg:omc_i_zone> set autoboot=true

zonecfg:omc_i_zone> set pool=pool_default

zonecfg:omc_i_zone> add net

zonecfg:omc_i_zone:net> set physical=eri0

zonecfg:omc_i_zone:net> set address=10.12.100.67

zonecfg:omc_i_zone:net> end

zonecfg:omc_i_zone> verify

zonecfg:omc_i_zone> commit

zonecfg:omc_i_zone> exit

 

 

# zoneadm -z omc_i_zone verify

 

       ：在运行上述verify步骤前，应该先运行pooladm –e，否则会出现pool not active的告警。

 

# zoneadm -z omc_i_zone install

 

 

# zoneadm -z omc_i_zone boot

 

 

# zlogin -C omc_i_zone

 

Select a Language

 

  0. English

  1. Simplified Chinese

 

Please make a choice (0 - 1), or press h or ? for help: 0

 

 

 

What type of terminal are you using?

 1) ANSI Standard CRT

 2) DEC VT52

 3) DEC VT100

 4) Heathkit 19

 5) Lear Siegler ADM31

 6) PC Console

 7) Sun Command Tool

 8) Sun Workstation

 9) Televideo 910

 10) Televideo 925

 11) Wyse Model 50

 12) X Terminal Emulator (xterms)

 13) CDE Terminal Emulator (dtterm)

 14) Other

Type the number of your choice and press Return:3

 

 

 Host name: omc-i-zone

 

ESC ＋ 2

ESC ＋ 2

 

 

q Configure Security Policy: qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Specify Yes if the system will use the Kerberos security mechanism.

 

  Specify No if this system will use standard UNIX security.

 

      Configure Kerberos Security

      qqqqqqqqqqqqqqqqqqqqqqqqqqq

      [ ] Yes

      [X] No

 

 

ESC ＋ 2

 

ESC ＋ 2

 

q Name Service qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must provide name service information.  Select the name

  service that will be used by this system, or None if your system will either

  not use a name service at all, or if it will use a name service not listed

  here.

 

  > To make a selection, use the arrow keys to highlight the option

    and press Return to mark it [X].

 

 

      Name service

      qqqqqqqqqqqq

      [ ] NIS+

      [ ] NIS

      [ ] DNS

      [ ] LDAP

      [X] None

 

ESC ＋ 2

 

ESC ＋ 2

 

q Time Zone qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  On this screen you must specify your default time zone.  You can specify a

  time zone in three ways:  select one of the continents or oceans from the

  list, select other - offset from GMT, or other - specify time zone file.

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Continents and Oceans

      qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

  -   [ ] Africa

  x   [ ] Americas

  x   [ ] Antarctica

  x   [ ] Arctic Ocean

  x   [X] Asia

  x   [ ] Atlantic Ocean

  x   [ ] Australia

  x   [ ] Europe

  v   [ ] Indian Ocean

 

ESC ＋ 2

 

 

q Country or Region qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  > To make a selection, use the arrow keys to highlight the option and

    press Return to mark it [X].

 

 

      Countries and Regions

      qqqqqqqqqqqqqqqqqqqqqqqq

  -   [ ] Afghanistan

  x   [ ] Armenia

  x   [ ] Azerbaijan

  x   [ ] Bahrain

  x   [ ] Bangladesh

  x   [ ] Bhutan

  x   [ ] Brunei

  x   [ ] Cambodia

  x   [X] China

  x   [ ] Cyprus

  x   [ ] East Timor

  x   [ ] Georgia

  v   [ ] Hong Kong

 

 

ESC ＋ 2

 

q Confirm Information qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  > Confirm the following information.  If it is correct, press F2;

    to change any information, press F4.

 

 

    Time zone: PRC

 

ESC ＋ 2

 

q Root Password qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq

 

  Please enter the root password for this system.

 

  The root password may contain alphanumeric and special characters.  For

  security, the password will not be displayed on the screen as you type it.

 

  > If you do not want a root password, leave both entries blank.

 

 

    Root password:  ****

    Root password:  ****       

 

 

ESC ＋ 2

 

等待片刻，omc_i_zone安装完成。对外部来说，omc_i_zone已经相当于一个单独的操作系统。

 

 

登录进去后注意：修改/etc/default/login文件，注释掉CONSOLE行以使root可以远程登录。

 

 

 

从这个网址（）可以下载最新的Solaris 10 3/05 for x64/x86的光盘。分5张光盘：
Solaris 10 3/05 CD 1
Solaris 10 3/05 CD 2
Solaris 10 3/05 CD 3
Solaris 10 3/05 CD 4
Solaris 10 3/05 Language CD第一张盘主要是Solaris 系统基本软件，第二张有许多和gnome相关的包，第三张主要是staroffice, 第四张包含了许多open source的软件如Apache/Ant/Python/TCL/mysql等等

 

由于安装环境及配置等原因，在安装过程中可能会出现各种各样的小问题，一般可以登陆到去查找相关的Solaris10的安装和管理文档以寻求解决