Linux下对主板进行监控

OS:redhat9.0
安装rpm:lm_sensors

1一块PIII的主板，使用ITE IT8712F-A芯片：
modprobe i2c-proc
modprobe it87
sensors
即可得到监控信息了

2一块xeon板子，E7501北桥，使用winbond W83627HF芯片：
modprobe i2c-isa
modprobe w83781d
sensors
即可了，信息如下：
w83627hf-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1:   +1.48 V  (min =  +4.08 V, max =  +4.08 V)             
VCore 2:   +2.49 V  (min =  +4.08 V, max =  +4.08 V)             
+3.3V:     +3.39 V  (min =  +2.97 V, max =  +3.63 V)             
+5V:       +5.07 V  (min =  +4.50 V, max =  +5.48 V)             
+12V:     +12.46 V  (min = +10.79 V, max = +13.11 V)             
-12V:     -12.03 V  (min = -13.21 V, max = -10.90 V)             
-5V:       -5.70 V  (min =  -5.51 V, max =  -4.51 V)             
V5SB:      +5.53 V  (min =  +4.50 V, max =  +5.48 V)             
VBat:      +3.26 V  (min =  +2.70 V, max =  +3.29 V)             
fan1:     4687 RPM  (min = 3000 RPM, div = 2)                    
fan2:        0 RPM  (min = 3000 RPM, div = 2)                    
fan3:        0 RPM  (min = 3000 RPM, div = 2)                    
temp1:       +60癈  (limit =  +60癈)                        sensor = thermistor          
temp2:     +30.0癈  (limit =  +60癈, hysteresis =  +50癈) sensor = PII/Celeron diode          
temp3:     +13.0癈  (limit =  +60癈, hysteresis =  +50癈) sensor = PII/Celeron diode          
vid:      +1.350 V
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm disabled

关键是知道监控芯片对应的驱动，然后加载，就可以了
当然这里面的驱动的层次关系，以硬件，深入的我就不知道了。

参考：