hp OM install on solaris 9

==========================================================================

                  Welcome to the installation for


             HP OpenView Operations for Sun Solaris A.08.10.160


Copyright (c) 1990-2004 Hewlett-Packard Company, All Rights Reserved.


==========================================================================
/tmp/ovoinstall[43]: swlist:  not found


ovoinstall didn't detect an existing OVO 8.X installation.



Continue with installation (y|n) :
[y]

                    ----------------------------------------
        ---------------------------------------------------------
            ---- OpenView Resource Calculation Section ----      

            The values you give here are just rough numbers      
        to do an estimation about RAM/SWAP and kernel parameters.

        These values are used for calculation only and never ever
              be used for licensing or hard coded limits.        
        ---------------------------------------------------------



Number of JavaGUI operators working simultaneously :
[5]
2


How many of these JavaGUI operators will use the ServiceNavigator :
[2]



Number of MotifGUI operators working simultaneously :
[5]
2


Number of nodes managed by HTTPS agents :
[100]
10


Number of nodes managed by DCE/NCS agents :
[0]
5
                    ----------------------------------------

Checking for memory requirements on management server
  (for agent systems/GUI stations please see the manual) ...
        checking if RAM is at least 838 MB
        checking if SWAP is at least 664 MB
Checking memory requirements successfully done
                    ----------------------------------------

Checking kernel parameters (takes a few minutes) ...

WARNING: The parameter shmsys:shminfo_shmmax is currently set to 8388608
         It is highly recommended that it is minimally set to 4294967295.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter shmsys:shminfo_shmmni is currently set to 100
         It is highly recommended that it is minimally set to 500.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter seminfo_semmni is currently set to 10
         It is highly recommended that it is minimally set to 500.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter seminfo_semopm is currently set to 10
         It is highly recommended that it is minimally set to 100.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter seminfo_semmns is currently set to 60
         It is highly recommended that it is minimally set to 1024.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter seminfo_semmsl is currently set to 25
         It is highly recommended that it is minimally set to 400.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter seminfo_semmnu is currently set to 30
         It is highly recommended that it is minimally set to 400.
         To modify add new entry to system configuration information
         file - system(4).

WARNING: The parameter seminfo_semume is currently set to 10
         It is highly recommended that it is minimally set to 250.
         To modify add new entry to system configuration information
         file - system(4).



Warning(s) found while checking kernel parameters ...
Please check kernel parameters and correct them before restarting this script.
Continue installation (y|n) :
[n]
y
Checking kernel parameters successfully done
                    ----------------------------------------

Checking for installed filesets ...
Checking required filesets successfully done
                    ----------------------------------------

Checking for operating system patches listed in
/etc/opt/OV/share/conf/OpC/mgmt_sv/ovo.info.SunOS.5.9.txt
Please see the HP web for an updated version of this file.
(this will take some minutes)
Checking for operating system patches successfully done

        -------------------------------------------------
        ---- OpenView Software Configuration Section ----
        -------------------------------------------------


NOTE: SD isn't installed yet. Installation automatically selected.

NOTE: HPlwdce isn't installed yet. Installation automatically selected.


Reinstall the Network Node Manager (NNM) now (y|n) :
[y]
n


Install localized version of OVO (y|n) :
[n]
y


Install OVO Developer Kit (y|n) :
[n]
y


Install OSSPI for Unix platforms automatically (y|n) :
[y]
n


Install OSSPI for the Windows platforms automatically (y|n) :
[y]
n
Automatically selected installation of DCE/NCS agent software package


Complete path of SD depot :
[/mnt/ovo/OVOCD1/sd]
Checking ..
.            => found.


Complete path of HPlwdce depot :
[/mnt/ovo/OVOCD1/HPlwdce]
Checking ..
.            => found.


Complete path of OpenView Foundation Components depot :
[/mnt/ovo/OVOCD1/OV_DEPOT/HPOvComponents.sparc.tar]
Checking ..
.            => found.


Complete path of HPOvSext depot :
[/mnt/ovo/OVOCD1/OV_DEPOT/HPOvHACFG.depot]
Checking ..
.            => found.


Complete path of OpenView Operations server depot :
[/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOServer.depot]
Checking ..
.            => found.


Complete path of OpenView HTTPS clients depot :
[/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOhttpsClients.depot]
Checking ..
.            => found.


Complete path of OpenView DCE/NCS clients depot :
[/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOrpcClients.depot]
Checking ..
.            => found.


Complete directory path of patches for OVO :
[/mnt/ovo/OVOCD2/OVOServer_patches]
Checking ..
.            => found.


Complete path to documentation :
[/mnt/ovo/OVOCD1/OV_DOC]
Checking ..
.            => found.


                    ----------------------------------------
                    ----------------------------------------


Password for certificate backup
(only used on disaster recovery when no other backup was done)
(the password is required for using this backup) :
[]
openview


Do you plan to install OVO patches before the configuration starts (y|n) :
[n]
y
                    ----------------------------------------
        ---------------------------------------------------
        ----- OpenView Database Configuration Section -----
        ---------------------------------------------------



Oracle Home :
[/opt/oracle/product/9.2.0]
/opt/oracle/product/9.0.6


Oracle Home :
[/opt/oracle/product/9.0.6]
Checking ..
.            => found.


Oracle base directory :
[/opt/oracle]



Oracle base directory :
[/opt/oracle]
Checking ..
.            => found.


Value for ORACLE_SID :
[openview]



Oracle Data Directory :
[/opt/oradata/openview]



Oracle index directory :
[/opt/oradata/openview]



Database character set (NLS_LANG)
    Typical examples are

        american_america.WE8ISO8859P15          (English/default)
        american_canada.WE8ISO8859P15           (Canada - English)
        canadian french_canada.WE8ISO8859P15    (Canada - French)
        french_france.WE8ISO8859P15             (French)
        german_germany.WE8ISO8859P15            (German)
        japanese_japan.JA16SJIS                 (Japanese)
        korean_korea.KO16KSC5601                (Korean)
        russian_cis.CL8ISO8859P5                (Russian)
        simplified chinese_china.ZHS16CGB231280 (Simplified Chinese)
        spanish_spain.WE8ISO8859P15             (Spanish)
        traditional chinese_taiwan.ZHT16BIG5    (Traditional Chinese)

    For other valid settings see your Oracle manual  :
[american_america.WE8ISO8859P15]
american_america.WE8ISO8859P15

Checking NLS_LANG variable (american_america.WE8ISO8859P15)
Checking done.



This will upload the english OVO templates using LANG=C
Do you want to continue (y|n) :
[y]



Oracle user 'opc_op' password
  (will temporarily be stored during the installation) :
[po_cpo]



Oracle user 'opc_report' password
  (will temporarily be stored during the installation) :
[troper_cpo]



Oracle user 'system' password
  (keep the default if DB doesn't exist yet but change the password manually    after the installation
   - also this password will temporarily be stored during the installation) :
[manager]



Oracle DBA user :
[oracle]



Enable automatic database startup (y|n) :
[y]



Do you want to set up the database manually (local/remote) (y|n) :
[n]



If there is a current database -
    clear and re-initialize the tables (y|n) :
[y]



Oracle Service name :
[ov_net]

Saving current OVO install settings for reuse into file
    '/var/opt/OV/installation/ovoinstall.defaults'
                    ----------------------------------------
Checking for installed compatible setting of Oracle DB ...
Checking installed compatible setting of Oracle DB successfully done
                    ----------------------------------------
Checking for essential processes ...
     /usr/sbin/rpcbind
Checking essential processes successfully done
                    ----------------------------------------

Checking for typical disk space usage ...
    (showing which filesystem will decrease by the given amount of memory)
  Checking for disk space requirements of OV Foundation Components:
    /etc/opt/OV (/) will decrease by 1 MB
    /var/opt/OV (/) will decrease by 186 MB
    /opt/OV (/) will decrease by 33 MB
  Checking for disk space requirements of HTTPS agents package:
    /etc/opt/OV (/) will decrease by 1 MB
    /var/opt/OV (/) will decrease by 500 MB
    /opt/OV (/) will decrease by 1 MB
  Checking for disk space requirements of DCE/NCS agents package:
    /etc/opt/OV (/) will decrease by 1 MB
    /var/opt/OV (/) will decrease by 100 MB
    /opt/OV (/) will decrease by 1 MB
  Checking for disk space requirements of OpenView Operations:
    /etc/opt/OV (/) will decrease by 2 MB
    /var/opt/OV (/) will decrease by 4 MB
    /opt/OV (/) will decrease by 400 MB
    /opt/oradata/openview (/) will decrease by 700 MB
    /opt/oradata/openview (/) will decrease by 150 MB
  Checking for disk space requirements of local HTTPS agent:
    /etc/opt/OV (/) will decrease by 1 MB
    /var/opt/OV (/) will decrease by 1 MB
    /opt/OV (/) will decrease by 40 MB
  Checking for disk space requirements of SD:
    /var (/) will decrease by 7 MB
    /usr (/) will decrease by 14 MB
  Checking for disk space requirements of DCE runtime environment:
    /etc (/) will decrease by 1 MB
    /opt/OV (/) will decrease by 9 MB
  Checking for disk space requirements of possible future needs:
    /etc/opt/OV (/) will decrease by 50 MB
    /var/opt/OV (/) will decrease by 200 MB
    /opt/OV (/) will decrease by 400 MB
    /opt/oradata/openview (/) will decrease by 300 MB
    /opt/oradata/openview (/) will decrease by 200 MB
Checking typical disk space usage successfully done
                    ----------------------------------------


Do you want to start the installation now :
[y]

        ------------------------------------------------
        ----   Installation started please wait...  ----
        ------------------------------------------------

Installing SD ...
x SW-DIST/SD-AGENT/usr/lbin/swagent.new, 4859972 bytes, 9493 tape blocks
WARNING: Analysis phase for "/" had warnings.

=======  11/27/08 14:11:04 CST  BEGIN swinstall SESSION (setup mode)

       * Target connection succeeded for "/".
       * Execution phase succeeded for "/".
         
       * More information may be found in the agent logfile (location
         is /var/adm/sw/swagent.log).

=======  11/27/08 14:11:08 CST  END swinstall SESSION (setup mode)

Installation completed without errors.
You can now remove /tmp/sd directory.

Installation of Lightweight DCE Client started.
'1.1.4.22.1 (HP special version)' version 'HPlwdce' is succesfully installed.
--------------------------------------------

Installation of M10i Components started.
Transfering packages ...

Revision check for HPOvXpl 2.60.030.
Package HPOvXpl version 2.60.030 already installed. Skipping installation.
--------------------------------------------
Revision check for HPOvSecCo 2.10.030.
Installing 'HPOvSecCo'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvSecCo' version '2.10.030' is succesfully installed.
--------------------------------------------
Revision check for HPOvBbc 5.10.030.
Installing 'HPOvBbc'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvBbc' version '5.10.030' is succesfully installed.
--------------------------------------------
Revision check for HPOvSecCC 1.00.121.
Installing 'HPOvSecCC'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvSecCC' version '1.00.121' is succesfully installed.
--------------------------------------------
Revision check for HPOvCtrl 1.50.141.
Installing 'HPOvCtrl'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvCtrl' version '1.50.141' is succesfully installed.
--------------------------------------------
Revision check for HPOvDepl 2.10.031.
Installing 'HPOvDepl'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvDepl' version '2.10.031' is succesfully installed.
--------------------------------------------
Revision check for HPOvConf 1.00.121.
Installing 'HPOvConf'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvConf' version '1.00.121' is succesfully installed.
--------------------------------------------
Revision check for HPOvSecCS 1.00.121.
Installing 'HPOvSecCS'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvSecCS' version '1.00.121' is succesfully installed.
--------------------------------------------
Revision check for HPOvLcja 2.10.000.
Installing 'HPOvLcja'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvLcja' version '2.10.000' is succesfully installed.
--------------------------------------------
Revision check for HPOvSeja 2.10.000.
Installing 'HPOvSeja'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvSeja' version '2.10.000' is succesfully installed.
--------------------------------------------
Revision check for HPOvLcko 2.10.000.
Installing 'HPOvLcko'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvLcko' version '2.10.000' is succesfully installed.
--------------------------------------------
Revision check for HPOvSeko 2.10.000.
Installing 'HPOvSeko'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvSeko' version '2.10.000' is succesfully installed.
--------------------------------------------
Revision check for HPOvLczS 2.10.000.
Installing 'HPOvLczS'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvLczS' version '2.10.000' is succesfully installed.
--------------------------------------------
Revision check for HPOvSezS 2.10.000.
Installing 'HPOvSezS'. Look in '/var/opt/OV/tmp/pkgadd.log' for details.
'HPOvSezS' version '2.10.000' is succesfully installed.
--------------------------------------------
Revision check for HPOvJxpl 2.60.030.
Package HPOvJxpl version 2.60.030 already installed. Skipping installation.
--------------------------------------------

Installation of Server Extensions component HPOvSext.HPOVHACFG started...
From location '/mnt/ovo/OVOCD1/OV_DEPOT/HPOvHACFG.depot'
Check /var/adm/sw/swagent.log for progress information....
Calling /opt/OV/lbin/xpl/init_ovrg.sh server
Calling /opt/OV/lbin/secco/init_ovrg.sh server

Starting installation of documentation

Installation of documentation finished


Analysis phase for software OVOEnglish was successful.

Installation of OVO Server bundles and products ['OVOEnglish OVOLocalized OVOPC-DEV']
started...
From location '/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOServer.depot'
Check /var/adm/sw/swagent.log for progress information....

Installation completed successfully.

Installation of HTTPS Agents started...
From location '/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOhttpsClients.depot'
Check /var/adm/sw/swagent.log for progress information....

Installation completed successfully.

Installation of HTTPS Agents started...
From location '/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOhttpsClients.depot'
Check /var/adm/sw/swagent.log for progress information....

Installation completed successfully.

Installation of DCE/NCS Agents started...
From location '/mnt/ovo/OVOCD2/OV_DEPOT/HPOvOrpcClients.depot'
Check /var/adm/sw/swagent.log for progress information....

 Installing available patches from /mnt/ovo/OVOCD2/OVOServer_patches

/mnt/ovo/OVOCD2/OVOServer_patches/ovcreatedirs.tar:
x /var/opt/OV/share/databases/OpC/mgd_node/customer/linux/x86/linux24/cmds/ovcreatedirs.sh, 846 bytes, 2 tape blocks
x /var/opt/OV/share/databases/OpC/mgd_node/customer/sun/sparc/solaris7/cmds/ovcreatedirs.sh, 846 bytes, 2 tape blocks
x /var/opt/OV/share/databases/OpC/mgd_node/customer/hp/pa-risc/hpux1100/cmds/ovcreatedirs.sh, 846 bytes, 2 tape blocks
x /var/opt/OV/share/databases/OpC/mgd_node/customer/hp/ipf32/hpux1122/cmds/ovcreatedirs.sh, 846 bytes, 2 tape blocks

Installing available patches from /tmp/OVO_patches/A.08.10.160/OVO


                    ----------------------------------------
Please install the OVO patches / setup the database now.


Once you are finished with applying patches / setting up the
remote database, answer y to the following question to continue
with the configuration of the database.
Do you want to continue now (y|n) :
[y]



###############################another terminal#########################
bash-2.05# cd /mnt/
bash-2.05# ls
ITOSOL_00653(ovou 8.29)           gcc-3.4.6-sol10-sparc-local
ITOSOL_00663(solaris agent 8.51)  libgcc-3.4.6-sol10-sparc-local
ITOSOL_00673(ovou 8.30)           libiconv-1.11-sol10-sparc-local
ITOSOL_00674(JAVA GUI 8.30)       lost+found
ITOSOL_00677(windows agent 8.51)  make-3.81-sol10-sparc-local
crs                               oracle9
db                                ovo
db2                               suncl
dp
bash-2.05# mkdir ovou830
bash-2.05# mv ITOSOL_00673\(ovou\ 8.30\)  ovou830/
bash-2.05# cd ovou830/
bash-2.05# sh ITOSOL_00673\(ovou\ 8.30\)
x - ITOSOL_00673.text
x - ITOSOL_00673.tar [compressed]
x - install_patch [compressed]
bash-2.05# ./install_patch
Installing patch ITOSOL_00673 Thu Nov 27 14:25:09 CST 2008
Vendor specific install operations should follow here.
Searching for an installed HP Operations Manager for Sun Solaris Release A.08.10
         HP Operations Manager for Sun Solaris Release A.08.10 was detected - ok.
Saving original files to /system/ITOSOL_00673/orig and
installing new files
...............................................................................................................................................................................................................................................................................................................................................................................................................................................
         Changing group to opcgrp (id 77) for some files.

Patch ITOSOL_00673 installed.
bash-2.05#
bash-2.05# mkdir javagui
bash-2.05# mv ITOSOL_00674\(JAVA\ GUI\ 8.30\)  javagui/
bash-2.05# cd javagui/
bash-2.05# ls
ITOSOL_00674(JAVA GUI 8.30)
bash-2.05# sh ITOSOL_00674\(JAVA\ GUI\ 8.30\)
x - ITOSOL_00674.text
x - ITOSOL_00674.tar [compressed]
x - install_patch
bash-2.05# ./install_patch
Installing patch ITOSOL_00674 Thu Nov 27 14:33:26 CST 2008
Vendor specific install operations should follow here.
Saving original files to /system/ITOSOL_00674/orig and
installing new files
.............................................
Patch ITOSOL_00674 installed.
bash-2.05#

###############################################################################



本来想传个完整的，一次到位的，可惜安装的多了，人变懒了，没改内核参数，以至在建库时发生问题，
只得再传个手动DBSETUP数据库的日志了。接着翻一下看看吧