solaris 9 kernel paramter

bash-2.05# more /etc/system
*ident  "@(#)system     1.18    97/06/27 SMI" /* SVR4 1.5 */
*
* SYSTEM SPECIFICATION FILE
*

* moddir:
*
*       Set the search path for modules.  This has a format similar to the
*       csh path variable. If the module isn't found in the first directory
*       it tries the second and so on. The default is /kernel /usr/kernel
*
*       Example:
*               moddir: /kernel /usr/kernel /other/modules



* root device and root filesystem configuration:
*
*       The following may be used to override the defaults provided by
*       the boot program:
*
*       rootfs:         Set the filesystem type of the root.
*
*       rootdev:        Set the root device.  This should be a fully
*                       expanded physical pathname.  The default is the
*                       physical pathname of the device where the boot
*                       program resides.  The physical pathname is
*                       highly platform and configuration dependent.
*
*       Example:
*               rootfs:ufs
*               rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a
*
*       (Swap device configuration should be specified in /etc/vfstab.)



* exclude:
*
*       Modules appearing in the moddir path which are NOT to be loaded,
*       even if referenced. Note that `exclude' accepts either a module name,
*       or a filename which includes the directory.
*
*       Examples:
*               exclude: win
*               exclude: sys/shmsys



* forceload:
*
*       Cause these modules to be loaded at boot time, (just before mounting
*       the root filesystem) rather than at first reference. Note that
*       forceload expects a filename which includes the directory. Also
*       note that loading a module does not necessarily imply that it will
*       be installed.
*
*       Example:
*               forceload: drv/foo



* set:
*
*       Set an integer variable in the kernel or a module to a new value.
*       This facility should be used with caution.  See system(4).
*
*       Examples:
*
*       To set variables in 'unix':
*
*               set nautopush=32
*               set maxusers=40
*
*       To set a variable named 'debug' in the module named 'test_module'
*
*               set test_module:debug = 0x13
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmni=500
set semsys:seminfo_semmni=500
set semsys:seminfo_semopm=100
set semsys:seminfo_semmap=15
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=400
set semsys:seminfo_semaem=16384
set semsys:seminfo_semmnu=400
set shmsys:seminfo_semume=250
set shmsys:shminfo_shmseg=400
set semsys:seminfo_semume=250
set semsys:seminfo_semvmx=32767
set rlim_fd_cur=256
set rlim_fd_max=256
set maxusers=256
bash-2.05#

如果安装应用软件（ oracle ）时没改内核参数，则在建库时可能会报错，