全部博文(252)
标题 | 阅读 | 评论 | 转发 | 发布日期 | |
---|---|---|---|---|---|
error: ‘struct device’ has no member named ‘bus_id’《转》 | 901 | 0 | 0 | 2012-05-31 | |
mini2440 nand flash驱动移植--问题解决记录 | 698 | 0 | 0 | 2012-05-31 | |
Fedora 9 中安装vmware tools | 733 | 0 | 0 | 2012-05-24 | |
如何编写linux下nand flash驱动(2) | 638 | 0 | 0 | 2012-05-23 | |
如何编写linux下nand flash驱动(1) | 608 | 0 | 0 | 2012-05-23 | |
Native PCIE热插拔框架的实现机制 | 1039 | 0 | 0 | 2012-05-23 | |
嵌入式BootLoader技术内幕(转载) | 463 | 0 | 0 | 2012-05-23 | |
linux网址精选 | 989 | 0 | 0 | 2012-05-23 | |
嵌入式linux启动信息完全注释2(转) | 503 | 0 | 0 | 2012-05-23 | |
嵌入式Linux开发资源大全 | 502 | 0 | 0 | 2012-05-23 | |
嵌入式linux启动信息完全注释1(转) | 384 | 0 | 0 | 2012-05-23 | |
2.6.14 内核移植说明文档 (转) | 469 | 0 | 0 | 2012-05-23 | |
Linux2.6.24.4 移植到S3C2410 | 553 | 0 | 0 | 2012-05-23 | |
s3c2410触摸屏驱动(2.6内核)分析 | 325 | 0 | 0 | 2012-05-23 | |
嵌入式指纹处理模块设计与实现 | 873 | 0 | 0 | 2012-05-23 | |
S3C2410 LCD 驱动程序移植及GUI程序编写 | 355 | 0 | 0 | 2012-05-23 | |
u-boot编译过程二 | 606 | 0 | 0 | 2012-05-23 | |
u-boot编译过程一 | 515 | 0 | 0 | 2012-05-23 | |
u-boot的Makefile分析 | 596 | 0 | 0 | 2012-05-23 | |
Bootloader(3) | 658 | 0 | 0 | 2012-05-23 |