Chinaunix首页 | 论坛 | 博客
  • 博客访问: 193590
  • 博文数量: 23
  • 博客积分: 10
  • 博客等级: 民兵
  • 技术积分: 428
  • 用 户 组: 普通用户
  • 注册时间: 2011-03-05 12:46
个人简介

博客转移至CU。之前的百度空间博客http://hi.baidu.com/williwill。

文章分类

全部博文(23)

文章存档

2014年(18)

2013年(5)

我的朋友

发布时间:2013-12-11 14:46:39

client采用wifidog,可以在openwrt的menuconfig后network - captive portals下找到server采用wifidog新推荐的authpuppyauthpuppy的安装配置可参考http://www.authpuppy.org/doc/Getting_Started除了部分细节,基本可完全按其成功配置目前遗留问题:mysql配置好后无法通过安装页面登录,虽然在终端下正常。只能.........【阅读全文】

阅读(37446) | 评论(7) | 转发(5)

发布时间:2013-11-10 23:56:20

初接触openwrt,第一次编译完毕后通过原厂固件web界面烧写后,192.168.1.1管理界面打不开,原来opewrt默认没有luci。执行scripts/feeds install -a -p luci,然后make menuconfig就可以看到LUCI菜单无web烧写固件需要把固件放到tmp目录下,然后通过mtd -r write /tmp/openwrt-ar71xx-generic-mw4530r-v1-squa.........【阅读全文】

阅读(6485) | 评论(0) | 转发(1)

发布时间:2013-11-10 01:45:50

按各地址起作用的顺序,uboot引导linux内核启动涉及到以下地址:load address:entry point: 这两个地址是mkimage时指定的bootm address:bootm为uboot的一个命令,以此从address启动kernelkernel运行地址:在具体mach目录中的Makefile.boot中指定,为kernel启动后实际运行的物理地址.........【阅读全文】

阅读(2755) | 评论(0) | 转发(1)

发布时间:2013-11-10 01:18:07

移植内核经常会出现Uncompressing Linux................................................................ done, booting the kernel.后无启动信息的状况,此时有下面调试方法:一. 使用low level debug1. 内核编译时要打开:kernel hacking->kernel debuging->low level debug(这时要确认下arch/arm/kernel/debu.........【阅读全文】

阅读(3282) | 评论(0) | 转发(1)

发布时间:2013-11-10 00:50:20

关于移植的基本方法可以先阅读u-boot的README文档If the system board that you have is not listed, then you will needto port U-Boot to your hardware platform. To do this, follow thesesteps:1. Add a new configuration option for your board to the toplevel "Makefile" and to the "MAKEALL" scri.........【阅读全文】

阅读(1792) | 评论(0) | 转发(0)
给主人留下些什么吧!~~
留言热议
请登录后留言。

登录 注册