独学而无友,则孤陋而寡闻!
| 标题 | 阅读 | 评论 | 转发 | 发布日期 | |
|---|---|---|---|---|---|
| FreeBSD中VLAN设置 | 2328 | 0 | 0 | 2008-08-17 | |
| MFS 学习 | 1449 | 0 | 0 | 2008-07-05 | |
| ipfw网上资源(二) | 1716 | 0 | 0 | 2008-06-11 | |
| ports中有用的部分 | 1602 | 0 | 0 | 2008-05-25 | |
| FreeBSD下通过com口调整网络设备 | 1637 | 0 | 0 | 2008-05-21 | |
| FreeBSD7.0下硬盘复制的经历 | 2251 | 0 | 0 | 2008-04-21 | |
| FreeBSD系统的克隆 | 2776 | 0 | 0 | 2008-04-18 | |
| SCSI硬盘模式带的整体速度降低 | 1936 | 0 | 0 | 2008-04-16 | |
| FreeBSD下视频软件试用 | 1489 | 0 | 0 | 2008-04-12 | |
| Xorg在检测不到模式的显示器上的设置 | 2678 | 0 | 0 | 2008-04-12 | |
| ipfw的内核natd使用手册(摘自ipfw man) | 3419 | 0 | 0 | 2008-03-15 | |
| FreeBSD Q&A摘录 | 1610 | 0 | 0 | 2008-03-13 | |
| FreeBSD7 ipfwpcap测试: | 3091 | 0 | 0 | 2008-03-12 | |
| FreeBSD 6.2通过源码升级到7.0,遇到几个问题。 | 2058 | 0 | 0 | 2008-03-12 | |
| bash fork | 1789 | 0 | 0 | 2008-03-07 | |
| vi 使用方法 | 2162 | 0 | 0 | 2008-02-23 | |
| Mysql不支持GBK及解决方法 | 5317 | 0 | 0 | 2007-12-19 | |
| 通过SSH远程管理中文名文件 | 2335 | 0 | 0 | 2007-12-18 | |
| ipfw的两个参数:established和diverted | 2186 | 0 | 0 | 2007-11-12 | |
| ipf内核参数调整的系统自启动 | 2285 | 0 | 0 | 2007-11-12 |
adx1102011-06-18 19:43
superzjq2011-06-10 23:38
非常感谢老师的关注:)使用skipto可以解决这个问题
但还有点疑问,one_pass不是只跟nat和pipe有关吗,limit应该是属于动态规则吧 ?
在下不才 针对两种情况进行了测试
net.inet.ip.fw.one_pass = 0
# ipfw show
00100 9 529 allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 100
00200 0 0 nat 1 ip from 192.168.1.0/24 to any out via em0
00300 0 0 nat 1 ip from any to me in via em0
00400 3 373 allow ip from any to any(用来匹配所有重新进入ipfw的数据包)
65535 0 0 deny ip from any to any
net.inet.ip.fw.one_pass = 1
# ipfw show
00100 8 480 allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 100
00200 0 0 nat 1 ip from 192.168.1.0/24 to any out via em0
00300 0 0 nat 1 ip from any to me in via em0
00400 0 0 allow ip from any to 192.168.1.0/24 out via em1
65535 45 1262 deny ip from any to any
其中em0接外网,em1接内网,有没one_pass都一样,数据包一被limit匹配后就没了下文
只能跟skipto一起使用,不知道是不是BUG,还是说有哪些地方需要设置
我用的是FreeBSD 8.2,内核配置都是默认的 
superzjq2011-05-26 17:59
老师您好,能否帮我看下这段配置
ipfw add allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 10
ipfw add nat 1 ip from 192.168.1.0/24 to any out via em0
ipfw add nat 1 ip from any to me in via em0
ipfw nat 1 config if em0 log
ipfw add allow ip from any to any
em0接外网,em1接内网,做了NAT,想限制每IP连接数,已经明确指定了方向和接口,但不知为何数据包被第一条limit匹配后就无法到达第二条的nat上了,去掉第一条的limit部分后则完全没有问题,实在是让我郁闷不已,望不吝赐教
