CentOS6调整网卡顺序

在虚拟机下安装的CentOS6.0，用克隆的方法，一下搞了好几个CentOS6.0的虚拟机，进入系统之后却发现网卡的序号不再是eth0，而是eth1.

以前CentOS 5.x版本的时候，在/etc/modprobe.conf里面可以定义网卡的顺序，通过：

1	alias eth0 e1000e

这种方法来定义。

但是在CentOS6中，已经不存在/etc/modprobe.conf文件了，在/etc/modprobe.d下也不存在对网卡进行配置的配置文件：

1 2 3 4

[root@localhost modprobe.d]# pwd /etc/modprobe.d [root@localhost modprobe.d]# grep eth0 * [root@localhost modprobe.d]#

经过分析发现，CentOS 6.0开始通过udev来管理网卡，具体网卡序号的配置文件在：/etc/udev/rules.d/70-persistent-net.rules文件中，其内容为：

01 02 03 04 05 06 07 08 09 10 11

# This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x15ad:0x07b0 (vmxnet3) (custom name provided by external tool) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:93:00:00", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x15ad:0x07b0 (vmxnet3) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:93:00:0e", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

从上面可以看出，原来的eth0网卡是安装CentOS6那台虚拟机的网卡配置（关键是MAC地址），克隆后虚拟网卡的MAC修改了，所以系统自动生成相应的配置文件，网卡序号为eth1，所以在系统中只能看到eth1。

将/etc/udev/rules.d/70-persistent-net.rules修改：

1 2 3 4 5 6 7 8

# This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x15ad:0x07b0 (vmxnet3) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:93:00:0e", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

重新启动后就可以看到熟悉的eth0了。