Network Working Group M. St. Johns
Request for Comments: 1413 US Department of Defense
Obsoletes: 931 February 1993
Identification Protocol
Status of this Memo
This RFCspecifies an IAB standards track protocol for the Internet
community, and requests discussion and suggestions for improvements.
Please refer to the current edition of the IAB Official Protocol
Standards for the standardization state and status of this protocol.
Distribution of this memo is unlimited.
1. INTRODUCTION
The Identification Protocol (a.k.a., ident, a.k.a., the Ident
Protocol) provides a means to determine the identity of a user of a
particular TCP connection. Given a TCP port number pair, it returns
a character string which identifies the owner of that connection on
the server's system.
The Identification Protocol was formerly called the Authentication
Server Protocol. It has been renamed to better reflect its function.
This document is a product of the TCP Client Identity Protocol
Working Group of the Internet Engineering Task Force (IETF).
2. OVERVIEW
This is a connection based application on TCP. A server listens for
TCP connections on TCP port 113 (decimal). Once a connection is
established, the server reads a line of data which specifies the
connection of interest. If it exists, the system dependent user
identifier of the connection of interest is sent as the reply. The
server may then either shut the connection down or it may continue to
read/respond to multiple queries.
The server should close the connection down after a configurable
amount of time with no queries - a 60-180 second idle timeout is
recommended. The client may close the connection down at any time;
however to allow for network delays the client should wait at least
30 seconds (or longer) after a query before abandoning the query and
closing the connection.
3. RESTRICTIONS
Queries are permitted only for fully specified connections. The
query contains the local/foreign port pair -- the local/foreign
address pair used to fully specify the connection is taken from the
local and foreign address of query connection. This means a user on
address A may only query the server on address B about connections
between A and B.
4. QUERY/RESPONSE FORMAT
The server accepts simple text query requests of the form:
,
where is the TCP port (decimal) on the target (where
the ident server is running) system, and is the
TCP port (decimal) on the source (client) system.
N.B - If a client on host A wants to ask a server on host B about a
connection specified locally (on the client's machine) as 23, 6191
(an inbound TELNET connection), the client must actually ask about
6191, 23 - which is how the connection would be specified on host B.
For example:
6191, 23
The response is of the form
, : :
where , are the same pair as the
query, is a keyword identifying the type of response, and
is context dependent.
The information returned is that associated with the fully specified
TCP connection identified by , ,
, , where and
are the local and foreign IP addresses of the
querying connection -- i.e., the TCP connection to the Identification
Protocol Server. ( and are taken
from the query.)
For example:
6193, 23 : USERID : UNIX : stjohns
6195, 23 : ERROR : NO-USER
5. RESPONSE TYPES
A response can be one of two types:
USERID
In this case, is a string consisting of an
operating system name (with an optional character set
identifier), followed by :, followed by an
identification string.
The character set (if present) is separated from the
operating system name by ,. The character set
identifier is used to indicate the character set of the
identification string. The character set identifier,
if omitted, defaults to US-ASCII (see below).
Permitted operating system names and character set
names are specified in , Assigned Numbers or
its successors.
In addition to those operating system and character set
names specified in Assigned Numbers there is one
special case operating system identifier - OTHER.
Unless OTHER is specified as the operating system
type, the server is expected to return the normal
user identification of the owner of this connection.
Normal in this context may be taken to mean a string
of characters which uniquely identifies the connection
owner such as a user identifier assigned by the system
administrator and used by such user as a mail
identifier, or as the user part of a user/password
pair used to gain access to system resources. When an
operating system is specified (e.g., anything but
OTHER), the user identifier is expected to be in a
more or less immediately useful form - e.g., something
that could be used as an argument to finger or as a
mail address.
OTHER indicates the identifier is an unformatted
character string consisting of printable characters in
the specified character set. OTHER should be
specified if the user identifier does not meet the
constraints of the previous paragraph. Sending an
encrypted audit token, or returning other non-userid
information about a user (such as the real name and
phone number of a user from a UNIX passwd file) are
both examples of when OTHER should be used.
Returned user identifiers are expected to be printable
in the character set indicated.
The identifier is an unformatted octet string - - all
octets are permissible EXCEPT octal 000 (NUL), 012 (LF)
and 015 (CR). N.B. - space characters (040) following the
colon separator ARE part of the identifier string and
may not be ignored. A response string is still
terminated normally by a CR/LF. N.B. A string may be
printable, but is not *necessarily* printable.
ERROR
For some reason the port owner could not be determined,
tells why. The following are the permitted values of and
their meanings:
INVALID-PORT
Either the local or foreign port was improperly
specified. This should be returned if either or
both of the port ids were out of range (TCP port
numbers are from 1-65535), negative integers, reals or
in any fashion not recognized as a non-negative
integer.
NO-USER
The connection specified by the port pair is not
currently in use or currently not owned by an
identifiable entity.
HIDDEN-USER
The server was able to identify the user of this
port, but the information was not returned at the
request of the user.
UNKNOWN-ERROR
Can't determine connection owner; reason unknown.
Any error not covered above should return this
error code value. Optionally, this code MAY be
returned in lieu of any other specific error code
if, for example, the server desires to hide
information implied by the return of that error
code, or for any other reason. If a server
implements such a feature, it MUST be configurable
and it MUST default to returning the proper error
message.
Other values may eventually be specified and defined in future
revisions to this document. If an implementer has a need to specify
a non-standard error code, that code must begin with X.
In addition, the server is allowed to drop the query connection
without responding. Any premature close (i.e., one where the client
does not receive the EOL, whether graceful or an abort should be
considered to have the same meaning as ERROR : UNKNOWN-ERROR.
FORMAL SYNTAX
::=
::= ,
::=
::= 015 012 ; CR-LF End of Line Indicator
::= |
::= : ERROR :
::= : USERID :
:
::= INVALID-PORT | NO-USER | UNKNOWN-ERROR
| HIDDEN-USER |
::= [ , ]
::= OTHER | UNIX | ...etc.
; (See Assigned Numbers)
::= US-ASCII | ...etc.
; (See Assigned Numbers)
::=
::= 1*64 ; 1-64 characters
::= X1*63
; 2-64 chars beginning w/X
::= 1*5 ; 1-5 digits.
::= 0 | 1 ... 8 | 9 ; 0-9
::=
- (dash), .!@#$%^&*()_=+.,<>/?'~`{}[]; >
; upper and lowercase a-z plus
; printables minus the colon :
; character.
::= 1*512
::=
ASCII NUL (000), CR (015) and LF (012)>
Notes on Syntax:
1) To promote interoperability among variant
implementations, with respect to white space the above
syntax is understood to embody the be conservative in
what you send and be liberal in what you accept
philosophy. Clients and servers should not generate
unnecessary white space (space and tab characters) but
should accept white space anywhere except within a
token. In parsing responses, white space may occur
anywhere, except within a token. Specifically, any
amount of white space is permitted at the beginning or
end of a line both for queries and responses. This
does not apply for responses that contain a user ID
because everything after the colon after the operating
system type until the terminating CR/LF is taken as
part of the user ID. The terminating CR/LF is NOT
considered part of the user ID.
2) The above notwithstanding, servers should restrict the
amount of inter-token white space they send to the
smallest amount reasonable or useful. Clients should
feel free to abort a connection if they receive 1000
characters without receiving an .
3) The 512 character limit on user IDs and the 64
character limit on tokens should be understood to mean
as follows: a) No new token (i.e., OPSYS or ERROR-TYPE)
token will be defined that has a length greater than 64
and b) a server SHOULD NOT send more than 512 octets of
user ID and a client MUST accept at least 512 octets of
user ID. Because of this limitation, a server MUST
return the most significant portion of the user ID in
the first 512 octets.
4) The character sets and character set identifiers should
map directly to those defined in or referenced by ,
Assigned Numbers or its successors. Character set
identifiers only apply to the user identification field
- all other fields will be defined in and must be sent
as US-ASCII.
5) Although is defined as an
above, it must follow the format and character set
constraints implied by the ; see the
discussion above.
6) The character set provides context for the client to
print or store the returned user identification string.
If the client does not recognize or implement the
returned character set, it should handle the returned
identification string as OCTET, but should in addition
store or report the character set. An OCTET string
should be printed, stored or handled in hex notation
(0-9a-f) in addition to any other representation the
client implements - this provides a standard
representation among differing implementations.
6. Security Considerations
The information returned by this protocol is at most as trustworthy
as the host providing it OR the organization operating the host. For
example, a PC in an open lab has few if any controls on it to prevent
a user from having this protocol return any identifier the user
wants. Likewise, if the host has been compromised the information
returned may be completely erroneous and misleading.
The Identification Protocol is not intended as an authorization or
access control protocol. At best, it provides some additional
auditing information with respect to TCP connections. At worst, it
can provide misleading, incorrect, or maliciously incorrect
information.
The use of the information returned by this protocol for other than
auditing is strongly discouraged. Specifically, using Identification
Protocol information to make access control decisions - either as the
primary method (i.e., no other checks) or as an adjunct to other
methods may result in a weakening of normal host security.
An Identification server may reveal information about users,
entities, objects or processes which might normally be considered
private. An Identification server provides service which is a rough
analog of the CallerID services provided by some phone companies and
many of the same privacy considerations and arguments that apply to
the CallerID service apply to Identification. If you wouldn't run a
finger server due to privacy considerations you may not want to run
this protocol.
7. ACKNOWLEDGEMENTS
Acknowledgement is given to Dan Bernstein who is primarily
responsible for renewing interest in this protocol and for pointing
out some annoying errors in .
References
[1] St. Johns, M., Authentication Server, , TPSC, January
1985.
[2] Reynolds, J., and J. Postel, Assigned Numbers, STD 2, ,
USC/Information Sciences Institute, July 1992.
Author's Address
Michael C. St. Johns
DARPA/CSTO
3701 N. Fairfax Dr
Arlington, VA 22203
Phone: (703) 696-2271
EMail:
| |
