The system has been enabled to communicate between target and host. Here just to record the usbnet configuration as memo:
Target: CONFIG_USB_GADGET to generate the g_ether
modprobe g_ether
ifconfig usb0 192.168.0.101
route add 192.168.0.100 dev usb0
Ubuntu Host:
CONFIG_USB_USBNET to generate the usbnet (normally the module has been installed)
mobprobe usbnet
ifconfig usb0 192.1698.0.100
route add 192.168.0.101 dev usb0
XP Host:
When issue the modprobe g_ether on the target, a new hardware (RNDIS/Ethernet adapter) will be detected by XP. In most cases, the driver attached with XP doesn't work well. Please specify the driver (named linux.inf) below uploaded.
abd:
Note: linux.inf is not allowed to uploaded by system, here paster the context for rference.
=====================================================
; MS-Windows driver config matching some basic modes of the
; Linux-USB Ethernet/RNDIS gadget firmware:
;
; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
; cable modem profile, and supports most non-Microsoft USB hosts
;
; - RNDIS plus CDC Subset ... used by hardware that incapable of
; full CDC Ethernet support.
;
; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
; http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
[Version]
Signature = "$CHICAGO$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linux%
Compatible = 1
MillenniumPreferred = .ME
DriverVer = 03/30/2004,0.0.0.0
; catalog file would be used by WHQL
;CatalogFile = Linux.cat
[Manufacturer]
%Linux% = LinuxDevices,NT.5.1
[LinuxDevices]
; NetChip IDs, used by both firmware modes
%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
[LinuxDevices.NT.5.1]
%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
[ControlFlags]
ExcludeFromSelect=*
; Windows 98, Windows 98 Second Edition specific sections --------
[RNDIS]
DeviceID = usb8023
MaxInstance = 512
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
[RNDIS_AddReg_98]
HKR, , DevLoader, 0, *ndis
HKR, , DeviceVxDs, 0, usb8023.sys
HKR, NDIS, LogDriverName, 0, "usb8023"
HKR, NDIS, MajorNdisVersion, 1, 5
HKR, NDIS, MinorNdisVersion, 1, 0
HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
[RNDIS_Install_98]
CopyFiles=RNDIS_CopyFiles_98
[RNDIS_CopyFiles_98]
usb8023.sys, usb8023w.sys, , 0
rndismp.sys, rndismpw.sys, , 0
; Windows Millennium Edition specific sections --------------------
[RNDIS.ME]
DeviceID = usb8023
MaxInstance = 512
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
[RNDIS_AddReg_ME]
HKR, , DevLoader, 0, *ndis
HKR, , DeviceVxDs, 0, usb8023.sys
HKR, NDIS, LogDriverName, 0, "usb8023"
HKR, NDIS, MajorNdisVersion, 1, 5
HKR, NDIS, MinorNdisVersion, 1, 0
HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
[RNDIS_Install_ME]
CopyFiles=RNDIS_CopyFiles_ME
[RNDIS_CopyFiles_ME]
usb8023.sys, usb8023m.sys, , 0
rndismp.sys, rndismpm.sys, , 0
; Windows 2000 specific sections ---------------------------------
[RNDIS.NT]
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
CopyFiles = RNDIS_CopyFiles_NT
[RNDIS.NT.Services]
AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
[RNDIS_CopyFiles_NT]
; no rename of files on Windows 2000, use the 'k' names as is
usb8023k.sys, , , 0
rndismpk.sys, , , 0
[RNDIS_ServiceInst_NT]
DisplayName = %ServiceDisplayName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\usb8023k.sys
LoadOrderGroup = NDIS
AddReg = RNDIS_WMI_AddReg_NT
[RNDIS_WMI_AddReg_NT]
HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
; Windows XP specific sections -----------------------------------
[RNDIS.NT.5.1]
Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
BusType = 15
DriverVer = 03/30/2004,0.0.0.0
AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
; no copyfiles - the files are already in place
[RNDIS.NT.5.1.Services]
AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
[RNDIS_ServiceInst_51]
DisplayName = %ServiceDisplayName%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\usb8023.sys
LoadOrderGroup = NDIS
AddReg = RNDIS_WMI_AddReg_51
[RNDIS_WMI_AddReg_51]
HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
; Windows 2000 and Windows XP common sections --------------------
[RNDIS_AddReg_NT]
HKR, Ndi, Service, 0, "USB_RNDIS"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
[RNDIS_EventLog]
AddReg = RNDIS_EventLog_AddReg
[RNDIS_EventLog_AddReg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
; Common Sections -------------------------------------------------
[RNDIS_AddReg_Common]
HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
HKR, NDI\params\NetworkAddress, type, 0, "edit"
HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
HKR, NDI\params\NetworkAddress, default, 0, " "
HKR, NDI\params\NetworkAddress, optional, 0, "1"
[SourceDisksNames]
1=%SourceDisk%,,1
[SourceDisksFiles]
usb8023m.sys=1
rndismpm.sys=1
usb8023w.sys=1
rndismpw.sys=1
usb8023k.sys=1
rndismpk.sys=1
[DestinationDirs]
RNDIS_CopyFiles_98 = 10, system32/drivers
RNDIS_CopyFiles_ME = 10, system32/drivers
RNDIS_CopyFiles_NT = 12
[Strings]
ServiceDisplayName = "USB Remote NDIS Network Device Driver"
NetworkAddress = "Network Address"
Linux = "Linux Developer Community"
LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
========EOF=================================
阅读(1323) | 评论(0) | 转发(0) |
