Oracle监控数据库性能的SQL

--1. 监控事例的等待

    select event,sum(decode(wait_Time,0,0,1)) "Prev",
            sum(decode(wait_Time,0,1,0)) "Curr",count(*) "Tot"
            from v$session_Wait
           group by event
           order by 4;

--2. 回滚段的争用情况

    select name, rssize,writes,xacts,waits, gets, waits/gets "Ratio"
      from v$rollstat a, v$rollname b
     where a.usn = b.usn;

--3. 监控表空间的 I/O 比例

    select df.tablespace_name name,df.file_name "file",f.phyrds pyr,
           f.phyblkrd pbr,f.phywrts pyw, f.phyblkwrt pbw
      from v$filestat f, dba_data_files df
     where f.file# = df.file_id
  order by df.tablespace_name;

--4. 监控文件系统的 I/O 比例

    select substr(a.file#,1,2) "#", substr(a.name,1,30) "Name",
           a.status, a.bytes, b.phyrds, b.phywrts
      from v$datafile a, v$filestat b
     where a.file# = b.file#;

--5.在某个用户下找所有的索引

    select user_indexes.table_name, user_indexes.index_name,uniqueness, column_name
      from user_ind_columns, user_indexes
     where user_ind_columns.index_name = user_indexes.index_name
       and user_ind_columns.table_name = user_indexes.table_name
  order by user_indexes.table_type, user_indexes.table_name,
           user_indexes.index_name, column_position;

--6. 监控 SGA 的命中率

    select a.value + b.value "logical_reads", c.value "phys_reads",
           round(100 * ((a.value+b.value)-c.value) / (a.value+b.value)) "BUFFER HIT RATIO"
      from v$sysstat a, v$sysstat b, v$sysstat c
     where a.statistic# = 38
       and b.statistic# = 39
       and c.statistic# = 40;

   --数据缓冲命中率 应接近1
    select round((1- sum(decode(name,'physical reads',value,0))/
    (sum(decode(name,'db block gets',value,0)) + sum(decode(name,'consistent gets',value,0)))),2)
 from v$sysstat

--7. 监控 SGA 中字典缓冲区的命中率

    select parameter, gets,Getmisses , getmisses/(gets+getmisses)*100 "miss ratio",
           (1-(sum(getmisses)/ (sum(gets)+sum(getmisses))))*100 "Hit ratio"
      from v$rowcache
     where gets+getmisses <>0
  group by parameter, gets, getmisses;

  select 1-sum(getmisses)/sum(gets) from v$rowcache

--8. 监控 SGA 中共享缓存区的命中率，应该小于1%

   select sum(pins) "Total Pins", sum(reloads) "Total Reloads",
          round( 1 - sum(reloads)/sum(pins),2)
      from v$librarycache;  

--9. 显示所有数据库对象的类别和大小

    select count(name) num_instances ,type ,sum(source_size) source_size ,
           sum(parsed_size) parsed_size ,sum(code_size) code_size ,sum(error_size) error_size,
           sum(source_size) +sum(parsed_size) +sum(code_size) +sum(error_size) size_required
      from dba_object_size
  group by type
  order by 2;

--10. 监控 SGA 中重做日志缓存区的命中率，应该小于1%

    SELECT name, gets, misses, immediate_gets, immediate_misses,
           Decode(gets,0,0,misses/gets*100) ratio1,
           Decode(immediate_gets+immediate_misses,0,0,
           immediate_misses/(immediate_gets+immediate_misses)*100) ratio2
      FROM v$latch
     WHERE name IN ('redo allocation', 'redo copy');

--11.  监控内存和硬盘的排序比率，最好使它小于 .10，增加 sort_area_size

    SELECT a.value "disk sorts",
           b.value "memory sorts",
           round((a.value/b.value)*100,2)  "disk sort percentage"
     FROM v$sysstat a,v$sysstat b
       WHERE a.name='sorts (disk)' and b.name='sorts (memory)';

--12. 监控当前数据库谁在运行什么SQL语句

    SELECT osuser, username, sql_text from v$session a, v$sqltext b
     where a.sql_address =b.address order by address, piece;

--13. 监控字典缓冲区

    SELECT (SUM(PINS - RELOADS)) / SUM(PINS) "LIB CACHE" FROM V$LIBRARYCACHE;
    SELECT (SUM(GETS - GETMISSES - USAGE - FIXED)) / SUM(GETS) "ROW CACHE" FROM V$ROWCACHE;
    SELECT SUM(PINS) "EXECUTIONS", SUM(RELOADS) "CACHE MISSES WHILE EXECUTING" FROM V$LIBRARYCACHE;

--   后者除以前者,此比率小于1%,接近0%为好。

    SELECT SUM(GETS) "DICTIONARY GETS",SUM(GETMISSES) "DICTIONARY CACHE GET MISSES"，SUM(GETMISSES)/ SUM(GETS)
    FROM V$ROWCACHE

--14. 找ORACLE字符集

    select * from sys.props$ where name='NLS_CHARACTERSET';

--15. 监控 MTS

    select busy/(busy+idle) "shared servers busy" from v$dispatcher;

--    此值大于0.5时，参数需加大

    select sum(wait)/sum(totalq) "dispatcher waits" from v$queue where type='dispatcher';
    select count(*) from v$dispatcher;
    select servers_highwater from v$mts;

--    servers_highwater接近mts_max_servers时，参数需加大

--16. 碎片程度

    select tablespace_name,count(tablespace_name) from dba_free_space group by tablespace_name
    having count(tablespace_name)>10;

    alter tablespace name coalesce;
    alter table name deallocate unused;

    create or replace view ts_blocks_v as
    select tablespace_name,block_id,bytes,blocks,'free space' segment_name from dba_free_space
    union all
    select tablespace_name,block_id,bytes,blocks,segment_name from dba_extents;

    select * from ts_blocks_v;

    select tablespace_name,sum(bytes),max(bytes),count(block_id) from dba_free_space
    group by tablespace_name;

--    查看碎片程度高的表

    SELECT segment_name table_name , COUNT(*) extents
    FROM dba_segments WHERE owner NOT IN ('SYS', 'SYSTEM') GROUP BY segment_name
    HAVING COUNT(*) = (SELECT MAX( COUNT(*) ) FROM dba_segments GROUP BY segment_name);

--17. 表、索引的存储情况检查

    select segment_name,sum(bytes),count(*) ext_quan from dba_extents where
    tablespace_name='&tablespace_name' and segment_type='TABLE' group by tablespace_name,segment_name;

    select segment_name,count(*) from dba_extents where segment_type='INDEX' and owner='&owner'
    group by segment_name;

--18、找使用CPU多的用户session

--    12是cpu used by this session

    select a.sid,spid,status,substr(a.program,1,10) prog,a.terminal,osuser,value/60/100 value
    from v$session a,v$process b,v$sesstat c
    where c.statistic#=12 and c.sid=a.sid and a.paddr=b.addr order by value desc;