首先打开命令行窗口,输入
ipv6 install
然后输入
ipconfig -all
这里是截取某一部分:
thernet adapter 本地连接:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast Ethe
net NIC
Physical Address. . . . . . . . . : 00-0A-EB-83-F8-D4
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 222.201.148.35
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : 2001:250:1999:12::8402
IP Address. . . . . . . . . . . . : 2001:da8:207::8402
IP Address. . . . . . . . . . . . : 2001:250:1999:12:4853:3cf3:df2f:4c43
IP Address. . . . . . . . . . . . : 2001:250:1999:12:20a:ebff:fe83:f8d4
IP Address. . . . . . . . . . . . : fe80::20a:ebff:fe83:f8d4%4
Default Gateway . . . . . . . . . : 222.201.148.254
2001:250:1999:12::1
fe80::20c:dbff:fe23:1ea0%4
2001:250:1999:12:d43c:1bc0:9e8c:fe4
2001:da8:207::8401
2001:250:1999:12::8401
DNS Servers . . . . . . . . . . . : 222.201.130.30
222.201.130.33
fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
然后输入netsh,在netsh环境下输入:
interface ipv6 add address "本地连接" 2001:250:1999:12::8402
interface ipv6 add route ::/0 "本地连接" 2001:250:1999:12::8401
OK了,然后我们打开就可以看到一只跳舞的乌龟了
阅读(1536) | 评论(0) | 转发(0) |