set_parms使用方法

bjmcsdb#[/]set_parms
Usage: set_parms
   Where can be:
hostname
timezone
date_time
root_passwd
ip_address
addl_netwrk
   or initial (for entire initial boot-time dialog sequence)
bjmcsdb#[/]set_parms hostname
_______________________________________________________________________________
For the system to operate correctly, you must assign it a unique
system name or "hostname".  The hostname can be a simple name
(example: widget) or an Internet fully-qualified domain name
(example: widget.region.mycorp.com).

A simple name, or each dot (.) separated component of a domain name, must:

    * Start with an uppercase or lowercase letter.
    * End with a letter or digit.
    * Contain only letters, digits, underscore (_), or dash (-).
      The underscore (_) is not recommended.
    * Contain no more than 8 characters per component.
    * Contain no more than 63 total characters.

NOTE: The first or only component of a hostname should contain no more
      than 8 characters and the full hostname should contain no more
      than 63 characters for maximum compatibility with HP-UX software.

The current hostname is bjmcsdb.
_______________________________________________________________________________

Enter the system name, then press [Enter] or simply press [Enter]
to retain the current host name (bjmcsdb): bjmcsd01

You have chosen bjmcsd01 as the name for this system.
Is this correct?

Press [y] for yes or [n] for no, then press [Enter] y
_______________________________________________________________________________

  Working...
_______________________________________________________________________________

awk: There is a regular expression error.
        ?, *, or + not preceded by valid regular expression
 The input line number is 30. The file is /var/adm/inetd.sec.
 The source line number is 34.
_______________________________________________________________________________

Your changes will not take effect until you reboot the system.

_______________________________________________________________________________

Do you want to reboot now?

Press [y] for yes or [n] for no, then press [Enter]
Broadcast Message from root () Sun Dec 13 09:42:35...
PLEASE LOG OFF NOW ! ! !
        System maintenance about to begin.
All processes will be terminated in 0 seconds.

Broadcast Message from root () Sun Dec 13 09:42:35...
SYSTEM BEING BROUGHT DOWN NOW ! ! !