第一步出错如下：
[root@erpapp /]# /mnt/cdrom/install
VERITAS Installation Script
Copyright 1993 - 2005 VERITAS Software Corporation, All Rights Reserved.
Installing NetBackup Server Software
NOTE: To install only NetBackup Client software locally on this machine
or to load additional UNIX client software on this server, insert
the NetBackup UNIX Clients cdrom.
Do you wish to continue? [y,n] (y) y
The NetBackup and Media Manager software is built for use on LINUX hardware.
Do you want to install NetBackup and Media Manager files? [y,n] (y)
NetBackup and Media Manager are normally installed in /usr/openv.
The existing /usr/openv directory will be used for NetBackup and Media Manager.
Reading NetBackup files from /mnt/cdrom/linux/anb
gunzip: /mnt/cdrom/linux/anb/NetBackup.Z: No such file or directory
no data in archive
/mnt/cdrom/linux/catalog/anb/NB.file_trans failed. Aborting ...
File /usr/openv/tmp/install_trace.1984 contains a trace of this install.
That file can be deleted after you are sure the install was successful.
经尝试，方法如下：
从光盘拷贝rebuild.bat、gzip.exe、Linux目录到硬盘上，最好放在根目录(目录结构保持不便)
cmd模式执行rebuild.bat 重新打包文件后替换源光盘里的Linux目录即可。
错误二
The following package(s) are missing and must be
installed before NetBackup can be installed:
VRTSpbx
The missing package(s) are located on the VERITAS
Infrastructure Core Services (ICS) cdrom which is
included in the NetBackup media kit. From a different
window, unmount/eject the NetBackup cdrom and insert/mount
the ICS cdrom. When the ICS cdrom has been properly
mounted, files are visible and you are ready to
proceed, enter the path name to the directory where the
installics script is located followed by a to continue.
This script will then install the missing package(s).
OR
Enter q to stop this install and abort.
官方文档相关部分说明：
◆ NetBackup 6.0 contains features that are dependent on a new Infrastructure Core Services (ICS) product called VERITAS Private Branch Exchange (PBX).
PBX helps limit the number of TCP/IP ports used by many new features in NetBackup. In addition, it allows all socket communication to take place while connecting through a single port. The PBX port number is 1556. For more information about PBX and configuring NetBackup ports, refer to the both volumes of the
NetBackup System Administrator’s Guide, Volume 1.
Because PBX is required for all NetBackup products, its installation is part of the NetBackup installation procedure unless it is already present on the system. When you begin installing NetBackup on a server, the installation procedure determines if a version of PBX is already installed. Whether PBX is installed causes one of the following to happen:
◆
If a version of PBX already exists, the installation procedure uses that version of PBX and continues.
◆
If PBX does not exist, you see message similar to the following:
The following package(s) are missing and must be installed
before NetBackup can be installed:
VRTSpbx
The missing package(s) are located on the VERITAS Infrastructure Core Services (ICS) CD, which is included in the NetBackup media kit.
You need to do the following:
a.From a different window, unmount/eject the NetBackup Server software installation CD.
b. Mount the CD that contains the PBX software. Refer to the table “NetBackup Software CD Contents” on page 3 for an exact name of this CD.
c.From the original window where you began installing NetBackup, enter the CD pathname (the directory where the installics script is located).
d.The NetBackup installation script attempts to install PBX automatically.
解决方法如下，安装相应rpm即可.
[root@erpapp ics]# rpm -ivh VRTSicsco-1.2.3.18-18.i386.rpm
Preparing... ########################################### [100%]
1:VRTSicsco ########################################### [100%]
[root@erpapp ics]# rpm -ivh VRTSpbx-1.2.2.41-1.i386.rpm
Preparing... ########################################### [100%]
1:VRTSpbx ########################################### [100%]
阅读(3153) | 评论(0) | 转发(0) |
