This requires the use of the ras_admin and support

Collecting Data via CLI

 

This requires the use of the ras_admin and supportData utilities. Both utilities are located on the management host in the same directory which is specific to the Operating System where the CAM software is installed upon.

 

Solaris: /opt/SUNWsefms/bin/

Linux:  /opt/sun/cam/private/fms/bin/

Windows with CAM 5.0.2 or earlier:  C:\Program Files\Sun_Microsystems\StorageTek_Mgmt\Component\fms\bin\

Windows with CAM 5.1 or later:  C:\Program Files\Sun\Common Array Manager\Component\fms\bin\

 

 

1.  Get the array detail from ras_admin device_list:

 

Example:

 

 

# ras_admin device_list

Monitored On     Device          Type IP Address  Unique Identifier Active ASR

---------------- --------------- ---- ----------- ----------------- ------ ---

camhost          arrayname       6540           Y      Y  

#

 

 

NOTE: Although the array listed is a 2510, all arrays under CAM will provide data for support collection.

 

 

2. Use the supportData utility to collect the array data collection:

 

supportData -d -p -o where the:

 

is either the:

 

 

for the internal Array Serial Number or

for the Name of the Array assigned in Configuration Service or

for the ip address of either the A or B controller or

  for the fully qualified DNS name of either the A or B controller.

 

 

is the location where you want the output written, e.g. /tmp.

 

is the output file to be created.Example:

 

supportData -d arrayname -p /tmp -o myarray.support