[root@localhost ~]# pppoe-setup
Welcome to the PPPoE client setup.
your system to make sure the PPPoE client is installed properly...
LOGIN NAME
Enter your Login Name (default root): xy170638010214
INTERFACE
Enter the Ethernet interface connected to the PPPoE modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0): ---------------这里按回车键
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.
Enter the demand value (default no): ---------------这里按回车键
DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: ---------------这里键入
PASSWORD
Please enter your Password:
Please re-enter your Password: ---------------这里键入上网拨号密码
USERCTRL
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes):
FIREWALLING
Please choose the firewall rules to use.
very basic.
firewall setup; however, these will provide basic security.
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.
access to all standard servers like Web, e-mail, ftp, etc.
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.
The firewall choices are:
0 - NONE: This script will not set any firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
Choose a type of firewall (0-2): 0
Start this connection at boot time
Do you want to start this connection at boot time?
Please enter no or yes (default no):y
** Summary of what you entered **
Ethernet Interface: eth0
User name:
Activate-on-demand: No
DNS addresses:
Firewalling:
User Control:
Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/pppoe-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status.
[root@localhost ~]# pppoe-start
[root@localhost ~]# pppoe-status
pppoe-status: Link is up and running on interface ppp0
6: ppp0:
[root@localhost ~]# ping 121.14.88.14
PING 121.14.88.14 (121.14.88.14) 56(84) bytes of data.
64 bytes from 121.14.88.14: icmp_seq=1 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=2 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=3 ttl=54 time=17.6 ms
64 bytes from 121.14.88.14: icmp_seq=4 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=5 ttl=54 time=17.7 ms
^C64 bytes from 121.14.88.14: icmp_seq=6 ttl=54 time=17.6 ms
64 bytes from 121.14.88.14: icmp_seq=7 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=8 ttl=54 time=17.6 ms
64 bytes from 121.14.88.14: icmp_seq=9 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=10 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=11 ttl=54 time=17.7 ms
64 bytes from 121.14.88.14: icmp_seq=12 ttl=54 time=17.7 ms
^C64 bytes from 121.14.88.14: icmp_seq=13 ttl=54 time=18.1 ms
64 bytes from 121.14.88.14: icmp_seq=14 ttl=54 time=17.6 ms
64 bytes from 121.14.88.14: icmp_seq=15 ttl=54 time=17.6 ms
^C^X64 bytes from 121.14.88.14: icmp_seq=16 ttl=54 time=17.6 ms
^X^C
--- 121.14.88.14 ping statistics ---
16 packets transmitted, 16 received, 0% packet loss, time 15895ms
rtt min/avg/max/mdev = 17.675/17.744/18.170/0.175 ms
[root@localhost ~]# pppoe-status
pppoe-status: Link is up and running on interface ppp0
6: ppp0:
[root@localhost ~]#
以下是对PPPOE的基本操作
使用:
拨号上网 pppoe-start
段开上网 pppoe-stop
查看状态 pppoe-status