分类： C/C++
2006-11-17 14:48:32
Introduction
This tutorial forms a part of a new series which will concentrate on some of the non-GUI related issues in Windows programming. The subject of this tutorial will be the CreateProcess win32 API call. The tutorial is split into several sections, each one describing a neat fact about CreateProcess which you can use to your advantage. What I will describe cannot be found in Microsoft documentation, but was discovered through alot of experimentation!
Before I start properly let's review what CreateProcess does, and how to use it in your code. If you are familiar with CreateProcess then please skip down to the first undocumented tip.
BOOL CreateProcess(
LPCTSTR lpApplicationName, // name of executable module
LPTSTR lpCommandLine, // command line string
LPSECURITY_ATTRIBUTES lpProcessAttributes, // SD
LPSECURITY_ATTRIBUTES lpThreadAttributes, // SD
BOOL fInheritHandles, // handle inheritance option
DWORD dwCreationFlags, // creation flags
LPVOID lpEnvironment, // new envirnment block
LPCTSTR lpCurrentDirectory, // current directory name
LPSTARTUPINFO lpStartupInfo, // startup information
LPPROCESS_INFORMATION lpProcessInformation // process information
);
This function definition (above) was taken directly out of MSDN. The function is a bit unweildy and difficult to understand at first but process creation is a complicated business. Fortunately most of the parameters in CreateProcess can be omitted and the standard way of creating a new process looks like this:
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char szExe[] = "cmd.exe";
if(CreateProcess(0, szExe, 0, 0, FALSE, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
The example above simply starts a new instance of cmd.exe and lets it run. However, there are alot of options available in the call to CreateProcess which allow you to control how the program is started. Some of these options are specified directly as parameters, but most of the options are specified inside the STARTUPINFO structure which is passed as the 9th parameter:
typedef struct
{
DWORD cb;
LPTSTR lpReserved;
LPTSTR lpDesktop;
LPTSTR lpTitle;
DWORD dwX;
DWORD dwY;
DWORD dwXSize;
DWORD dwYSize;
DWORD dwXCountChars;
DWORD dwYCountChar;
DWORD dwFillAttribute;
DWORD dwFlags;
WORD wShowWindow;
WORD cbReserved2;
LPBYTE lpReserved2;
HANDLE hStdInput;
HANDLE hStdOutput;
HANDLE hStdError;
} STARTUPINFO;
The STARTUPINFO structure is also documented in MSDN, but some interesting information has been omitted by Microsoft which we will start to explore right now. The whole thrust of this article will centre around this STARTUPINFO structure, and the three "reserved" members of the STARTUPINFO structure - that is, lpReserved, lpReserved2 and cbReserved2.
Later on in this article I will explain what these three member variables are really used for, but first of all we will look at the dwFlags member variable and what it does. A quick reminder from MSDN is appropriate here:
Name Value Meaning
STARTF_USESHOWWINDOW
0x01
If this value is not specified, the wShowWindow member is ignored.
STARTF_USESIZE
0x02
If this value is not specified, the dwXSize and dwYSize members are ignored.
STARTF_USEPOSITION
0x04
If this value is not specified, the dwX and dwY members are ignored.
STARTF_USECOUNTCHARS
0x08
If this value is not specified, the dwXCountChars and dwYCountChars members are ignored.
STARTF_USEFILLATTRIBUTE
0x10
If this value is not specified, the dwFillAttribute member is ignored.
STARTF_RUNFULLSCREEN
0x20
Indicates that the process should be run in full-screen mode, rather than in windowed mode.
STARTF_FORCEONFEEDBACK
0x40
Indicates that the cursor is in feedback mode for two seconds after CreateProcess is called.
STARTF_FORCEOFFFEEDBACK
0x80
Indicates that the feedback cursor is forced off while the process is starting. The normal cursor is displayed.
STARTF_USESTDHANDLES
0x100
Sets the standard input, standard output, and standard error handles for the process to the handles specified in the hStdInput, hStdOutput, and hStdError members of the STARTUPINFO structure.
These nine values (or bit-flags) can be specified on their own or together by ORing them. The table above is pretty boring because apart from the START_USESTDHANDLES flag none of them are particularly useful. However, look at the range of values that the bit-flags use: the numbers go from 0x01 to 0x100 - this is only 9 bit-positions. There are 32bits in a single DWORD, so that leaves 23 possible bit-flags which havn't been defined yet.
That's more than enough background to get us started, so let's move onto move interesting things.
Detect if an executable was started from a Short-Cut
OK, the first trick I'm going to show you is how any win32 application can detect if it was started from a shortcut (i.e. by double-clicking a shortcut link), or directly via Windows explorer or the Run dialog. This trick is so simple it's amazing Microsoft hasn't documentated it:
There is an undocumented STARTUPINFO flag which I have called STARTF_TITLESHORTCUT. This bit-flag has the value 0x800. Windows sets this flag when an executable has been started via a short-cut. So it is possible for any program to check if it was started this way by examining it's own STARTUPINFO structure to see if this flag was specified:
// Returns TRUE if started through a shortcut, FALSE if not.
// Also returns the name of the shortcut file (if any)
BOOL GetShortcutName(TCHAR *szLinkName, UINT nLinkNameSize)
{
STARTUPINFO si = { sizeof(si) };
GetStartupInfo(&si);
if(si.dwFlags & STARTF_TITLESHORTCUT)
{
lstrcpyn(szLinkName, si.lpTitle, nLinkNameSize);
return TRUE;
}
return FALSE;
}
It is a simple matter to check for this undocumented flag, but another important piece of information should be explained. When the STARTF_TITLESHORTCUT flag is set, the lpTitle member of STARTUPINFO points to a string which contains the full path to the shortcut file used to start the current executable. So imagine that there is a short-cut on your desktop which launches notepad.exe. When notepad.exe starts, it's STARTUPINFO::lpTitle contains the following text:
C:\Documents and Settings\James\Desktop\Notepad.lnk
Pretty cool huh? Well I hope I've whet the appetite because we can move onto the next undocumented nugget!
Specify which monitor a process should start on
The next undocumented tip uses another unknown STARTUPINFO flag. This flag has the value 0x400, and I have given it the name STARTF_MONITOR.
When this flag is specified in the dwFlags member, the STARTUPINFO's hStdOutput member is used to specify a handle to a monitor, on which to start the new process. This monitor handle can be obtained by any of the multiple-monitor display functions (i.e. EnumDisplayMonitors, MonitorFromPoint, MonitorFromWindow etc).
BOOL CALLBACK EnumMonitorProc(HMONITOR hMonitor, HDC hdc, LPRECT rect, LPARAM data)
{
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char szExe[] = "sol.exe";
// specify which monitor to use
si.dwFlags = STARTF_MONITOR;
si.hStdOutput = hMonitor;
// start solitaire on specified monitor
if(CreateProcess(0, szExe, 0, 0, FALSE, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
}
// call EnumMonitorProc (above) for every installed monitor on the system
void Demo()
{
EnumDisplayMonitors(NULL, NULL, EnumMonitorProc, 0);
}
The example above uses the EnumDisplayMonitors API call as a method of obtaining a monitor handle (one for each monitor installed). The EnumMonitorProc function simply starts a new instance of Solitaire on each monitor in turn.
There are certain restrictions which should be noted here. You may be asking yourself why the above example works, when you know full well that the hStdOutput member should be used for a standard-output pipe. The answer to this question is simple - when the undocumented STARTF_MONITOR flag is specified, the STARTF_USESTDHANDLES flag is ignored. This means that these two flags cannot be used together, and the hStdInput, hStdOutput and hStdError handles act differently to how they are described in the documentation.
The next restriction is kind of obvious too: when you start a new process with CreateProcess, it has no concept of monitors, windows, or any other GUI related entities. A windows program actually has to physically create it's windows in order to display it's GUI. This is where the restriction for the STARTF_MONITOR flag comes into play. When a process calls CreateWindow, it can specify exactly where the window will appear by using the x, y, width and height parameters. This means that it is not possible for one program to specify where a second program's windows should appear unless this second program creates it's windows in a certain way.
hWnd = CreateWindow("ClassName",
"Title Text",
WS_OVERLAPPEDWINDOW,
CW_USEDEFAULT, // X coordinate
CW_USEDEFAULT, // Y coordinate
width, // Width
height, // Height
0, 0, 0, 0);
ShowWindow(hWnd, SW_SHOWDEFAULT);
It is only when a program creates a window using the CW_USEDEFAULT values for the coordinates, does the monitor specified by CreateProcess get used. The CreateWindow API call must obviously look inside the current process's STARTUPINFO structure to see what monitor it should create the window on. The Solitaire card-game was used in the example because it creates it's main window in this manner. I couldn't use Notepad as a demonstration because it didn't work - notepad seems to use actual coordinates to display it's main window rather than the CW_USEDEFAULT values.
Note that the ShellExecuteEx API call makes use of this CreateProcess feature in order to implement it's own monitor settings.
Starting screen-savers
In old versions of Microsoft's platform SDK documentation there was a flag called STARTF_SCREENSAVER - with the hex value 0x80000000. This flag is not documented anymore. When this flag is specified in CreateProcess' STARTUPINFO structure, the new process is started with NORMAL_PRIORITY. But, when this new process first calls GetMessage, it's priority is automatically lowered to that of IDLE_PRIORITY. This functionality seems vaguely useful for a screen-saver, and completely useless for any other situation. Presumably it is intended to allow a screen-saver's startup code to get up and running quickly, and then let the screensaver run "normally" without using too much CPU.
It appears that only the WinLogon process (winlogon.exe) is allowed to use STARTF_SCREENSAVER when activating the current screensaver, and this flag is next to useless for any other scenario.
Legacy Program Manager functionality
Do you remember Program Manager from the Windows 3.1 days? Program Manager still exists today even in Windows XP - just goto a command-prompt and type "progman" - the familiar program manager shell will pop up. Even in the days of Windows 3.1 (home and NT editions) the CreateProcess API contained undocumented functionality. I'm going to share this information with you now - even though this information is next to useless, it is still interesting to go over it.
If you look back at the STARTUPINFO structure definition, you can see that it has a member called lpReserved. This member has actually been in use for a long time now, but only by the Program Manager when it started executables.
The STARTUPINFO::lpReserved member is a pointer to a string buffer in the following format:
"dde.#,hotkey.#,ntvdm.#"
Whenever a new process is started by Program Manager, it can call GetStartupInfo to see how it was started. The resulting lpReserved member points to a string which contains three comma-separated fields, with the hash-signs (#) representing hexadecimal numbers.
The "dde." item specifies the DDE identifier which the child process can use to communicate with Program Manager. When the child process sends progman a WM_DDE_REQUEST message with this id, progman responds with a WM_DDE_DATA message. This message contains, amongst other things, the progman description, progman icon index and progman working directory for the child process.
More information on this progman DDE interface can be found in the Microsoft Knowledge Base article 105446.
The "hotkey." item specifies the Program Manager hotkey sequence which was used to activate the process. This is a 16bit hex number, with the low byte representing the ASCII code of the hotkey, and the high byte representing the HOTKEYF_xxx values used by the WM_SETHOTKEY message. I have no idea why it is useful for a child process to know this information.
The "ntvdm." item is used to inform the NTVDM process about a program's properties in Program Manager. This is a single hex field which is made up of a combination of bit-flags. The value 1 indicates that there is a current directory, a value of 2 indicates that the item has a hotkey, and a value of 4 indicates that a title has been assigned to the program.
That just about covers the lpReserved member. It really isn't a useful feature any more, and even though it is possible to use lpReserved in a call to CreateProcess, no child process is ever going to make use of the information. You can see for yourself how Program Manager uses lpReserved by debugging a child process which has been executed via progman.exe.
Of course, if you have two applications and want to pass information from one app to the second (other than through the command-line) the lpReserved field could be useful.
Legacy ShellExecuteEx functionality
The ShellExecuteEx API has been around since Windows NT 3.1 (but not "normal" 3.1). This API call takes a single parameter - a pointer to a SHELLEXECUTEINFO structure. You can look in MSDN to see what this structure looks like (it's pretty boring). There are one or two interesting fields in this structure which are not at all well documented:
The first is the hMonitor member. ShellExecuteEx uses this value to control which monitor a new process should appear on. This is possible because ShellExecuteEx calls CreateProcess internally, and uses the same undocumented feature we covered earlier on (the STARTF_MONITOR flag).
The next field of interest is the hIcon member. MSDN documents this as being a handle to an icon for the new process, but I believe it might be an icon-index rather than an icon. I havn't been able to make use of this feature, and as far as I can tell only console applications running under Windows NT 3.1/3.5 made use of this feature. However, ShellExecuteEx calls CreateProcess with another undocumented setting. Again this is a new STARTUPINFO flag (I call it STARTF_ICON). Strangely this flag has the same value as the STARTF_MONITOR flag (0x400), and like before the STARTUPINFO::hStdOutput member is used to store the icon handle/index/whatever it is. You can observe this quite simply by writing a small program that calls ShellExecuteEx which specifies an icon for the new process, and watch the call to CreateProcess in a debugger. (The new program always ignores the icon though).
The last field of interest is the dwHotKey value. This is supposed to specify a hot-key for a child process, so that you can activate the application at any time by using the hotkey sequence at the keyboard - however, I have been unable to make this work. Again, ShellExecuteEx uses another undocumented STARTUPINFO flag. In this case the flag appears in winbase.h - it is called STARTF_USEHOTKEY and has the value 0x200. When this flag is specified in the STARTUPINFO::dwFlags member, the hStdInput member is supposed to be used as the hotkey value instead of the standard-input pipe. (See WM_SETHOTKEY for more information).
Both the icon and hotkey features of CreateProcess are a little strange, firstly because the functionality appears to be duplicated by the lpReserved parameter, and secondly the functionality is not present in modern versions of Windows. If anyone knows any more details about this subject I'd be very glad to hear them!
Pass arbitrary data to a child process!
The last undocumented trick is quite different to the previous ones so I thought I'd save it until last. The STARTUPINFO structure contains two members, lpReserved2 and cbReserved2:
WORD cbReserved2;
LPBYTE lpReserved2;
These two members provide a mechanism for passing arbitrary amounts of data from one process to another, without having to call VirtualAllocEx / WriteProcessMemory. The cbReserved2 member is a 16bit integer and specifies the size of the buffer pointed to by lpReserved2. This means that lpReserved2 can be as big as 65535 bytes.
The example below demonstrates how to pass a buffer from one process to another. When process-B is executed by process-A, it will display a message box saying "Hello from Process A!":
Process A:
int main()
{
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char buf[4444] = "Hello from Process A!";
// setup the buffer to pass to child process
si.lpReserved2 = buf;
si.cbReserved2 = sizeof(buf);
// create a new process with this data
if(CreateProcess(0, szExe, 0, 0, 0, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
}
Process B:
int mainCRTStartup()
{
STARTUPINFO si = { sizeof(si) };
GetStartupInfo(&si);
// display what process A sent us
MessageBox(NULL, si.lpReserved2, "Process B", MB_OK);
}
So far so good - we have a nice method for passing arbitrary binary data between applications, without having to use the command line. There is a problem though. In the example above process-B must be compiled with absolutely no C-runtime support. The reason is quite complicated but I will explain it now:
The Microsoft C runtime (including Visual Studio.NET) uses the lpReserved2 feature in it's implementation of the C functions: exec, system and spawn. When a new process is executed using these routines, the C-runtime has to be able to give the child process copies of it's open file handles (opened using fopen/open rather than CreateFile).
lpReserved2 is used as a mechanism to pass this file-handles information between programs compiled using MSVC. Before the exec/spawn runtime functions inevitably call CreateProcess, the lpReserved2 buffer is constructed using the following format:
DWORD count;
BYTE flags[count];
HANDLE handles[count];
// in memory these are layed out sequentially:
[ count ][ flags... ][ handles... ]
The first field in the lpReserved2 buffer is a 32bit count of the number of file-handles being passed. Next comes a BYTE-array of flags, one for each file-handle. These flags represent the file attributes that were used when the file was opened using fopen/open - i.e. read-only, write-append, text-mode, binary-mode etc. Immediately following the flags array is the HANDLE-array containing each open file. This array contains the actual file handle identifiers, again there are handle_count items in the array.
Any amount of data can follow this structure, up to a maximum of 65536 bytes. The cbReserved2 member must be set to the length (in bytes) of this structure. The actual steps need to construct the lpReserved2 are as follows:
Any currently open "runtime" file-handles are enumerated.
Each underlying win32 HANDLE is marked as inheritable.
The number of file-handles being passed between processes is stored as the first 32bit integer in lpReserved2.
The attributes of each open file-handle are stored sequentially in the flags BYTE-array.
The file-handle integers are stored sequentially in the handles 32bit int-array.
Finally CreateProcess is called, with the bInheritHandles parameter set to TRUE.
It is at this stage that the C-runtime becomes important. When the child process executes, as part of it's initialization before main() is called, the I/O runtime support needs to be initialized. During this initialization the C-runtime calls GetStartupInfo and checks to see if an lpReserved2 buffer has been specified. If lpReserved2 is not NULL (i.e. it points to valid memory) then the C-runtime parses the contents of the buffer and extracts the file-handles contained within - this is so the file-handles will be available to the new process.
Call GetStartupInfo and check if lpReserved2 points to valid data.
Extract the first 32bit integer - this is the number of file-handles in the buffer.
Intialize the current process's I/O state with this number of open files.
Loop over the flags[] array in lpReserved2.
Loop over the handles[] array, populating the open-file table.
The problem might now be apparent to the more astute readers. Any program compiled using Microsoft's C-runtime will check it's lpReserved2 when it first starts - it should come as no surprise that this probably represents 90% of the C/C++ Windows programs in existence. The lpReserved2 member may also be used by other compiler vendors for the same purpose.
Should you wish to use lpReserved2 in your own programs (using CreateProcess instead of spawn/exec) you will need to be careful because the lpReserved2 buffer must be properly constructed. Failure to do so will result in the child processes crashing, or at the very least becoming unstable - the reason being that the child process is expecting to find lpReserved2 in a particular format.
Getting around this problem is simple. Setting the first 4 bytes in lpReserved to zeros (nulls) indicates that the handle-arrays are empty, and any c-runtime startup code will simply skip this phase. Your arbitrary binary data can come immediately after this zero-marker. The code now looks like this:
Process A:
int main()
{
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char buf[4444];
// construct the lpReserved2 buffer
*(DWORD *)buf = 0;
lstrcpy(buf+sizeof(DWORD), "Hello from Process A!";
// setup the buffer to pass to child process
si.lpReserved2 = buf;
si.cbReserved2 = sizeof(buf);
// create a new process with this data
if(CreateProcess(0, szExe, 0, 0, 0, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
}
Process B:
int main()
{
STARTUPINFO si = { sizeof(si) };
GetStartupInfo(&si);
// display what process A sent us
if(si.lpReserved2 != NULL)
MessageBox(NULL, si.lpReserved2 + sizeof(DWORD), "Process B", MB_OK);
}
The example above can now be compiled without having to worry about C-runtime considerations.
CreateProcess Summary
This was more of a programming article than a tutorial. Hopefully you have either found something useful, or have discovered something about CreateProcess which you didn't know before. Just to recap here is a summary of the undocumented CreateProcess features:
Undocumented STARTUPINFO flags:
Name Value Meaning
STARTF_USEHOTKEY
0x200
Use the hot-key DWORD specified in the hStdInput member.
STARTF_MONITOR
0x400
Use the HMONITOR handle specified in the hStdOutput member.
STARTF_ICON
0x400
Use the HICON specified in the hStdOutput member (incompatible with STARTF_MONITOR).
STARTF_TITLESHORTCUT
0x800
Program was started through a shortcut. The lpTitle contains the shortcut path.
STARTF_SCREENSAVER
0x80000000
Start the program with NORMAL_PRIORITY, then drop to IDLE_PRIORITY.
lpReserved - pointer to a string containing the text "dde.#,hotkey.#,ntvdm.#". This only occurs when a process is started through the legacy Program Manager shell.
lpReserved2 and cbReserved2 - pointer to a buffer containing artibtrary binary data to pass to the child process. To be safe ensure that the first four bytes of lpReserved2 are always zero.
I'd really like to hear any comments you have on this article, or any more information which I might have presented incorrectly or omitted entirely.Introduction
This tutorial forms a part of a new series which will concentrate on some of the non-GUI related issues in Windows programming. The subject of this tutorial will be the CreateProcess win32 API call. The tutorial is split into several sections, each one describing a neat fact about CreateProcess which you can use to your advantage. What I will describe cannot be found in Microsoft documentation, but was discovered through alot of experimentation!
Before I start properly let's review what CreateProcess does, and how to use it in your code. If you are familiar with CreateProcess then please skip down to the first undocumented tip.
BOOL CreateProcess(
LPCTSTR lpApplicationName, // name of executable module
LPTSTR lpCommandLine, // command line string
LPSECURITY_ATTRIBUTES lpProcessAttributes, // SD
LPSECURITY_ATTRIBUTES lpThreadAttributes, // SD
BOOL fInheritHandles, // handle inheritance option
DWORD dwCreationFlags, // creation flags
LPVOID lpEnvironment, // new envirnment block
LPCTSTR lpCurrentDirectory, // current directory name
LPSTARTUPINFO lpStartupInfo, // startup information
LPPROCESS_INFORMATION lpProcessInformation // process information
);
This function definition (above) was taken directly out of MSDN. The function is a bit unweildy and difficult to understand at first but process creation is a complicated business. Fortunately most of the parameters in CreateProcess can be omitted and the standard way of creating a new process looks like this:
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char szExe[] = "cmd.exe";
if(CreateProcess(0, szExe, 0, 0, FALSE, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
The example above simply starts a new instance of cmd.exe and lets it run. However, there are alot of options available in the call to CreateProcess which allow you to control how the program is started. Some of these options are specified directly as parameters, but most of the options are specified inside the STARTUPINFO structure which is passed as the 9th parameter:
typedef struct
{
DWORD cb;
LPTSTR lpReserved;
LPTSTR lpDesktop;
LPTSTR lpTitle;
DWORD dwX;
DWORD dwY;
DWORD dwXSize;
DWORD dwYSize;
DWORD dwXCountChars;
DWORD dwYCountChar;
DWORD dwFillAttribute;
DWORD dwFlags;
WORD wShowWindow;
WORD cbReserved2;
LPBYTE lpReserved2;
HANDLE hStdInput;
HANDLE hStdOutput;
HANDLE hStdError;
} STARTUPINFO;
The STARTUPINFO structure is also documented in MSDN, but some interesting information has been omitted by Microsoft which we will start to explore right now. The whole thrust of this article will centre around this STARTUPINFO structure, and the three "reserved" members of the STARTUPINFO structure - that is, lpReserved, lpReserved2 and cbReserved2.
Later on in this article I will explain what these three member variables are really used for, but first of all we will look at the dwFlags member variable and what it does. A quick reminder from MSDN is appropriate here:
Name Value Meaning
STARTF_USESHOWWINDOW
0x01
If this value is not specified, the wShowWindow member is ignored.
STARTF_USESIZE
0x02
If this value is not specified, the dwXSize and dwYSize members are ignored.
STARTF_USEPOSITION
0x04
If this value is not specified, the dwX and dwY members are ignored.
STARTF_USECOUNTCHARS
0x08
If this value is not specified, the dwXCountChars and dwYCountChars members are ignored.
STARTF_USEFILLATTRIBUTE
0x10
If this value is not specified, the dwFillAttribute member is ignored.
STARTF_RUNFULLSCREEN
0x20
Indicates that the process should be run in full-screen mode, rather than in windowed mode.
STARTF_FORCEONFEEDBACK
0x40
Indicates that the cursor is in feedback mode for two seconds after CreateProcess is called.
STARTF_FORCEOFFFEEDBACK
0x80
Indicates that the feedback cursor is forced off while the process is starting. The normal cursor is displayed.
STARTF_USESTDHANDLES
0x100
Sets the standard input, standard output, and standard error handles for the process to the handles specified in the hStdInput, hStdOutput, and hStdError members of the STARTUPINFO structure.
These nine values (or bit-flags) can be specified on their own or together by ORing them. The table above is pretty boring because apart from the START_USESTDHANDLES flag none of them are particularly useful. However, look at the range of values that the bit-flags use: the numbers go from 0x01 to 0x100 - this is only 9 bit-positions. There are 32bits in a single DWORD, so that leaves 23 possible bit-flags which havn't been defined yet.
That's more than enough background to get us started, so let's move onto move interesting things.
Detect if an executable was started from a Short-Cut
OK, the first trick I'm going to show you is how any win32 application can detect if it was started from a shortcut (i.e. by double-clicking a shortcut link), or directly via Windows explorer or the Run dialog. This trick is so simple it's amazing Microsoft hasn't documentated it:
There is an undocumented STARTUPINFO flag which I have called STARTF_TITLESHORTCUT. This bit-flag has the value 0x800. Windows sets this flag when an executable has been started via a short-cut. So it is possible for any program to check if it was started this way by examining it's own STARTUPINFO structure to see if this flag was specified:
// Returns TRUE if started through a shortcut, FALSE if not.
// Also returns the name of the shortcut file (if any)
BOOL GetShortcutName(TCHAR *szLinkName, UINT nLinkNameSize)
{
STARTUPINFO si = { sizeof(si) };
GetStartupInfo(&si);
if(si.dwFlags & STARTF_TITLESHORTCUT)
{
lstrcpyn(szLinkName, si.lpTitle, nLinkNameSize);
return TRUE;
}
return FALSE;
}
It is a simple matter to check for this undocumented flag, but another important piece of information should be explained. When the STARTF_TITLESHORTCUT flag is set, the lpTitle member of STARTUPINFO points to a string which contains the full path to the shortcut file used to start the current executable. So imagine that there is a short-cut on your desktop which launches notepad.exe. When notepad.exe starts, it's STARTUPINFO::lpTitle contains the following text:
C:\Documents and Settings\James\Desktop\Notepad.lnk
Pretty cool huh? Well I hope I've whet the appetite because we can move onto the next undocumented nugget!
Specify which monitor a process should start on
The next undocumented tip uses another unknown STARTUPINFO flag. This flag has the value 0x400, and I have given it the name STARTF_MONITOR.
When this flag is specified in the dwFlags member, the STARTUPINFO's hStdOutput member is used to specify a handle to a monitor, on which to start the new process. This monitor handle can be obtained by any of the multiple-monitor display functions (i.e. EnumDisplayMonitors, MonitorFromPoint, MonitorFromWindow etc).
BOOL CALLBACK EnumMonitorProc(HMONITOR hMonitor, HDC hdc, LPRECT rect, LPARAM data)
{
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char szExe[] = "sol.exe";
// specify which monitor to use
si.dwFlags = STARTF_MONITOR;
si.hStdOutput = hMonitor;
// start solitaire on specified monitor
if(CreateProcess(0, szExe, 0, 0, FALSE, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
}
// call EnumMonitorProc (above) for every installed monitor on the system
void Demo()
{
EnumDisplayMonitors(NULL, NULL, EnumMonitorProc, 0);
}
The example above uses the EnumDisplayMonitors API call as a method of obtaining a monitor handle (one for each monitor installed). The EnumMonitorProc function simply starts a new instance of Solitaire on each monitor in turn.
There are certain restrictions which should be noted here. You may be asking yourself why the above example works, when you know full well that the hStdOutput member should be used for a standard-output pipe. The answer to this question is simple - when the undocumented STARTF_MONITOR flag is specified, the STARTF_USESTDHANDLES flag is ignored. This means that these two flags cannot be used together, and the hStdInput, hStdOutput and hStdError handles act differently to how they are described in the documentation.
The next restriction is kind of obvious too: when you start a new process with CreateProcess, it has no concept of monitors, windows, or any other GUI related entities. A windows program actually has to physically create it's windows in order to display it's GUI. This is where the restriction for the STARTF_MONITOR flag comes into play. When a process calls CreateWindow, it can specify exactly where the window will appear by using the x, y, width and height parameters. This means that it is not possible for one program to specify where a second program's windows should appear unless this second program creates it's windows in a certain way.
hWnd = CreateWindow("ClassName",
"Title Text",
WS_OVERLAPPEDWINDOW,
CW_USEDEFAULT, // X coordinate
CW_USEDEFAULT, // Y coordinate
width, // Width
height, // Height
0, 0, 0, 0);
ShowWindow(hWnd, SW_SHOWDEFAULT);
It is only when a program creates a window using the CW_USEDEFAULT values for the coordinates, does the monitor specified by CreateProcess get used. The CreateWindow API call must obviously look inside the current process's STARTUPINFO structure to see what monitor it should create the window on. The Solitaire card-game was used in the example because it creates it's main window in this manner. I couldn't use Notepad as a demonstration because it didn't work - notepad seems to use actual coordinates to display it's main window rather than the CW_USEDEFAULT values.
Note that the ShellExecuteEx API call makes use of this CreateProcess feature in order to implement it's own monitor settings.
Starting screen-savers
In old versions of Microsoft's platform SDK documentation there was a flag called STARTF_SCREENSAVER - with the hex value 0x80000000. This flag is not documented anymore. When this flag is specified in CreateProcess' STARTUPINFO structure, the new process is started with NORMAL_PRIORITY. But, when this new process first calls GetMessage, it's priority is automatically lowered to that of IDLE_PRIORITY. This functionality seems vaguely useful for a screen-saver, and completely useless for any other situation. Presumably it is intended to allow a screen-saver's startup code to get up and running quickly, and then let the screensaver run "normally" without using too much CPU.
It appears that only the WinLogon process (winlogon.exe) is allowed to use STARTF_SCREENSAVER when activating the current screensaver, and this flag is next to useless for any other scenario.
Legacy Program Manager functionality
Do you remember Program Manager from the Windows 3.1 days? Program Manager still exists today even in Windows XP - just goto a command-prompt and type "progman" - the familiar program manager shell will pop up. Even in the days of Windows 3.1 (home and NT editions) the CreateProcess API contained undocumented functionality. I'm going to share this information with you now - even though this information is next to useless, it is still interesting to go over it.
If you look back at the STARTUPINFO structure definition, you can see that it has a member called lpReserved. This member has actually been in use for a long time now, but only by the Program Manager when it started executables.
The STARTUPINFO::lpReserved member is a pointer to a string buffer in the following format:
"dde.#,hotkey.#,ntvdm.#"
Whenever a new process is started by Program Manager, it can call GetStartupInfo to see how it was started. The resulting lpReserved member points to a string which contains three comma-separated fields, with the hash-signs (#) representing hexadecimal numbers.
The "dde." item specifies the DDE identifier which the child process can use to communicate with Program Manager. When the child process sends progman a WM_DDE_REQUEST message with this id, progman responds with a WM_DDE_DATA message. This message contains, amongst other things, the progman description, progman icon index and progman working directory for the child process.
More information on this progman DDE interface can be found in the Microsoft Knowledge Base article 105446.
The "hotkey." item specifies the Program Manager hotkey sequence which was used to activate the process. This is a 16bit hex number, with the low byte representing the ASCII code of the hotkey, and the high byte representing the HOTKEYF_xxx values used by the WM_SETHOTKEY message. I have no idea why it is useful for a child process to know this information.
The "ntvdm." item is used to inform the NTVDM process about a program's properties in Program Manager. This is a single hex field which is made up of a combination of bit-flags. The value 1 indicates that there is a current directory, a value of 2 indicates that the item has a hotkey, and a value of 4 indicates that a title has been assigned to the program.
That just about covers the lpReserved member. It really isn't a useful feature any more, and even though it is possible to use lpReserved in a call to CreateProcess, no child process is ever going to make use of the information. You can see for yourself how Program Manager uses lpReserved by debugging a child process which has been executed via progman.exe.
Of course, if you have two applications and want to pass information from one app to the second (other than through the command-line) the lpReserved field could be useful.
Legacy ShellExecuteEx functionality
The ShellExecuteEx API has been around since Windows NT 3.1 (but not "normal" 3.1). This API call takes a single parameter - a pointer to a SHELLEXECUTEINFO structure. You can look in MSDN to see what this structure looks like (it's pretty boring). There are one or two interesting fields in this structure which are not at all well documented:
The first is the hMonitor member. ShellExecuteEx uses this value to control which monitor a new process should appear on. This is possible because ShellExecuteEx calls CreateProcess internally, and uses the same undocumented feature we covered earlier on (the STARTF_MONITOR flag).
The next field of interest is the hIcon member. MSDN documents this as being a handle to an icon for the new process, but I believe it might be an icon-index rather than an icon. I havn't been able to make use of this feature, and as far as I can tell only console applications running under Windows NT 3.1/3.5 made use of this feature. However, ShellExecuteEx calls CreateProcess with another undocumented setting. Again this is a new STARTUPINFO flag (I call it STARTF_ICON). Strangely this flag has the same value as the STARTF_MONITOR flag (0x400), and like before the STARTUPINFO::hStdOutput member is used to store the icon handle/index/whatever it is. You can observe this quite simply by writing a small program that calls ShellExecuteEx which specifies an icon for the new process, and watch the call to CreateProcess in a debugger. (The new program always ignores the icon though).
The last field of interest is the dwHotKey value. This is supposed to specify a hot-key for a child process, so that you can activate the application at any time by using the hotkey sequence at the keyboard - however, I have been unable to make this work. Again, ShellExecuteEx uses another undocumented STARTUPINFO flag. In this case the flag appears in winbase.h - it is called STARTF_USEHOTKEY and has the value 0x200. When this flag is specified in the STARTUPINFO::dwFlags member, the hStdInput member is supposed to be used as the hotkey value instead of the standard-input pipe. (See WM_SETHOTKEY for more information).
Both the icon and hotkey features of CreateProcess are a little strange, firstly because the functionality appears to be duplicated by the lpReserved parameter, and secondly the functionality is not present in modern versions of Windows. If anyone knows any more details about this subject I'd be very glad to hear them!
Pass arbitrary data to a child process!
The last undocumented trick is quite different to the previous ones so I thought I'd save it until last. The STARTUPINFO structure contains two members, lpReserved2 and cbReserved2:
WORD cbReserved2;
LPBYTE lpReserved2;
These two members provide a mechanism for passing arbitrary amounts of data from one process to another, without having to call VirtualAllocEx / WriteProcessMemory. The cbReserved2 member is a 16bit integer and specifies the size of the buffer pointed to by lpReserved2. This means that lpReserved2 can be as big as 65535 bytes.
The example below demonstrates how to pass a buffer from one process to another. When process-B is executed by process-A, it will display a message box saying "Hello from Process A!":
Process A:
int main()
{
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char buf[4444] = "Hello from Process A!";
// setup the buffer to pass to child process
si.lpReserved2 = buf;
si.cbReserved2 = sizeof(buf);
// create a new process with this data
if(CreateProcess(0, szExe, 0, 0, 0, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
}
Process B:
int mainCRTStartup()
{
STARTUPINFO si = { sizeof(si) };
GetStartupInfo(&si);
// display what process A sent us
MessageBox(NULL, si.lpReserved2, "Process B", MB_OK);
}
So far so good - we have a nice method for passing arbitrary binary data between applications, without having to use the command line. There is a problem though. In the example above process-B must be compiled with absolutely no C-runtime support. The reason is quite complicated but I will explain it now:
The Microsoft C runtime (including Visual Studio.NET) uses the lpReserved2 feature in it's implementation of the C functions: exec, system and spawn. When a new process is executed using these routines, the C-runtime has to be able to give the child process copies of it's open file handles (opened using fopen/open rather than CreateFile).
lpReserved2 is used as a mechanism to pass this file-handles information between programs compiled using MSVC. Before the exec/spawn runtime functions inevitably call CreateProcess, the lpReserved2 buffer is constructed using the following format:
DWORD count;
BYTE flags[count];
HANDLE handles[count];
// in memory these are layed out sequentially:
[ count ][ flags... ][ handles... ]
The first field in the lpReserved2 buffer is a 32bit count of the number of file-handles being passed. Next comes a BYTE-array of flags, one for each file-handle. These flags represent the file attributes that were used when the file was opened using fopen/open - i.e. read-only, write-append, text-mode, binary-mode etc. Immediately following the flags array is the HANDLE-array containing each open file. This array contains the actual file handle identifiers, again there are handle_count items in the array.
Any amount of data can follow this structure, up to a maximum of 65536 bytes. The cbReserved2 member must be set to the length (in bytes) of this structure. The actual steps need to construct the lpReserved2 are as follows:
Any currently open "runtime" file-handles are enumerated.
Each underlying win32 HANDLE is marked as inheritable.
The number of file-handles being passed between processes is stored as the first 32bit integer in lpReserved2.
The attributes of each open file-handle are stored sequentially in the flags BYTE-array.
The file-handle integers are stored sequentially in the handles 32bit int-array.
Finally CreateProcess is called, with the bInheritHandles parameter set to TRUE.
It is at this stage that the C-runtime becomes important. When the child process executes, as part of it's initialization before main() is called, the I/O runtime support needs to be initialized. During this initialization the C-runtime calls GetStartupInfo and checks to see if an lpReserved2 buffer has been specified. If lpReserved2 is not NULL (i.e. it points to valid memory) then the C-runtime parses the contents of the buffer and extracts the file-handles contained within - this is so the file-handles will be available to the new process.
Call GetStartupInfo and check if lpReserved2 points to valid data.
Extract the first 32bit integer - this is the number of file-handles in the buffer.
Intialize the current process's I/O state with this number of open files.
Loop over the flags[] array in lpReserved2.
Loop over the handles[] array, populating the open-file table.
The problem might now be apparent to the more astute readers. Any program compiled using Microsoft's C-runtime will check it's lpReserved2 when it first starts - it should come as no surprise that this probably represents 90% of the C/C++ Windows programs in existence. The lpReserved2 member may also be used by other compiler vendors for the same purpose.
Should you wish to use lpReserved2 in your own programs (using CreateProcess instead of spawn/exec) you will need to be careful because the lpReserved2 buffer must be properly constructed. Failure to do so will result in the child processes crashing, or at the very least becoming unstable - the reason being that the child process is expecting to find lpReserved2 in a particular format.
Getting around this problem is simple. Setting the first 4 bytes in lpReserved to zeros (nulls) indicates that the handle-arrays are empty, and any c-runtime startup code will simply skip this phase. Your arbitrary binary data can come immediately after this zero-marker. The code now looks like this:
Process A:
int main()
{
STARTUPINFO si = { sizeof(si) };
PROCESS_INFORMATION pi;
char buf[4444];
// construct the lpReserved2 buffer
*(DWORD *)buf = 0;
lstrcpy(buf+sizeof(DWORD), "Hello from Process A!";
// setup the buffer to pass to child process
si.lpReserved2 = buf;
si.cbReserved2 = sizeof(buf);
// create a new process with this data
if(CreateProcess(0, szExe, 0, 0, 0, 0, 0, 0, &si, &pi))
{
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
}
}
Process B:
int main()
{
STARTUPINFO si = { sizeof(si) };
GetStartupInfo(&si);
// display what process A sent us
if(si.lpReserved2 != NULL)
MessageBox(NULL, si.lpReserved2 + sizeof(DWORD), "Process B", MB_OK);
}
The example above can now be compiled without having to worry about C-runtime considerations.
CreateProcess Summary
This was more of a programming article than a tutorial. Hopefully you have either found something useful, or have discovered something about CreateProcess which you didn't know before. Just to recap here is a summary of the undocumented CreateProcess features:
Undocumented STARTUPINFO flags:
Name Value Meaning
STARTF_USEHOTKEY
0x200
Use the hot-key DWORD specified in the hStdInput member.
STARTF_MONITOR
0x400
Use the HMONITOR handle specified in the hStdOutput member.
STARTF_ICON
0x400
Use the HICON specified in the hStdOutput member (incompatible with STARTF_MONITOR).
STARTF_TITLESHORTCUT
0x800
Program was started through a shortcut. The lpTitle contains the shortcut path.
STARTF_SCREENSAVER
0x80000000
Start the program with NORMAL_PRIORITY, then drop to IDLE_PRIORITY.
lpReserved - pointer to a string containing the text "dde.#,hotkey.#,ntvdm.#". This only occurs when a process is started through the legacy Program Manager shell.
lpReserved2 and cbReserved2 - pointer to a buffer containing artibtrary binary data to pass to the child process. To be safe ensure that the first four bytes of lpReserved2 are always zero.
I'd really like to hear any comments you have on this article, or any more information which I might have presented incorrectly or omitted entirely.
