Oracle 11.1.0.6 for linux X86 64的SILENT安装

Oracle 11.1.0.6 for linux X86 64的SILENT安装

首先是检查系统硬件情况：

代码:


[root@enterprice64 ~]# grep MemTotal /proc/meminfo

MemTotal:      8178836 kB

[root@enterprice64 ~]# grep SwapTotal /proc/meminfo

SwapTotal:     8385888 kB

[root@enterprice64 ~]# free

             total       used       free     shared    buffers     cached

Mem:       8178836    5297744    2881092          0     122512    4773424

-/+ buffers/cache:     401808    7777028

Swap:      8385888          0    8385888

[root@enterprice64 ~]# df -k /dev/shm

Filesystem           1K-blocks      Used Available Use% Mounted on

tmpfs                  4089416         0   4089416   0% /dev/shm

[root@enterprice64 ~]# df -k /tmp

Filesystem           1K-blocks      Used Available Use% Mounted on

/dev/sda7             10153988    428132   9201740   5% /

[root@enterprice64 ~]# df -k /data

Filesystem           1K-blocks      Used Available Use% Mounted on

/dev/sda9            207275064   3933228 192642952   3% /data



.

要求内存不小于1G，在内存小于2G，SWAP应该是内存的1.5倍，内存2到8G，SWAP和内存相同大小即可，内存超过8G，SWAP是内存的0.75倍。
由于11g对于共享内存要求变大，因此系统共享内存应该大于512*进程数，如果共享内存不足的话，会造成ORA-845或ORA-1078错误。
要求临时表空间不少于200M，安装目录应大于4G。
下面检查系统软件情况：

代码:


[root@enterprice64 ~]# cat /proc/version

Linux version 2.6.18-8.el5 (mockbuild@ca-build14) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Tue Jun 5 23:25:19 EDT 2007

[root@enterprice64 ~]# uname -a

Linux enterprice64 2.6.18-8.el5 #1 SMP Tue Jun 5 23:25:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux

[root@enterprice64 ~]# more /etc/issue

Enterprise Linux Enterprise Linux Server release 5 (Carthage)

Kernel r on an m



.

对操作系统要求：
Asianux 2.0
Asianux 3.0
Oracle Enterprise Linux 4.0
Oracle Enterprise Linux 5.0
Red Hat Enterprise Linux 4.0
Red Hat Enterprise Linux 5.0
SUSE Enterprise Linux 10.0
系统内核为2.6.9(Asianux 2.0、Oracle Enterprise Linux 4.0、Red Hat Enterprise Linux 4.0)，2.6.18(Asianux 3.0、Oracle Enterprise Linux 5.0、Red Hat Enterprise Linux 5.0)，或2.6.16.21(SUSE Enterprise Linux 10.0)。
对于ES4，oracle需要一下包：
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3 (32 bit)
elfutils-libelf-0.125
elfutils-libelf-devel-0.125
gcc-4.1.1
gcc-c++-4.1.1
glibc-2.5-12
glibc-2.5-12 (32 bit)
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5-12 (32 bit)
libaio-0.3.106
libaio-0.3.106 (32 bit)
libaio-devel-0.3.106
libgcc-4.1.1
libgcc-4.1.1 (32 bit)
libstdc++-4.1.1
libstdc++-4.1.1 (32 bit)
libstdc++-devel 4.1.1
make-3.81
sysstat-7.0.0
通过rpm –qa查询是否所有需要的包都以及安装，如果没有安装的通过rpm –ivh命令进行安装。
检查网络情况：

代码:


[root@enterprice64 ~]# cat /etc/nsswitch.conf|grep hosts

#hosts:     db files nisplus nis dns

hosts:      files dns

[root@enterprice64 ~]# hostname

enterprice64

[root@enterprice64 ~]# domainname

(none)

[root@enterprice64 ~]# more /etc/hosts

# Do not remove the following line, or various programs

# that require network functionality will fail.

127.0.0.1               enterprice64 localhost.localdomain localhost

172.25.13.195           enterprice64



.

建立Oracle用户和dba组：

代码:


[root@enterprice64 ~]# groupadd oinstall

[root@enterprice64 ~]# groupadd dba

[root@enterprice64 ~]# groupadd asadmin

[root@enterprice64 ~]# useradd -g oinstall -G dba,asadmin oracle

[root@enterprice64 ~]# passwd oracle

Changing password for user oracle.

New UNIX password: 

BAD PASSWORD: it is based on a dictionary word

Retype new UNIX password: 

passwd: all authentication tokens updated successfully.

[root@enterprice64 ~]# id nobody

uid=99(nobody) gid=99(nobody) groups=99(nobody) context=root:system_r:unconfined_t:SystemLow-SystemHigh



.

建立oinstall、dba和asadmin组。创建好用户后，检查nobody用户是否存在。不存在的话，建立该用户。
检测并修改系统的核心参数，编辑/etc/sysctl.conf文件，添加下面的配置，保存后重启系统。注意，如果系统默认的配置比这里给出的值大，不要修改原有配置。

fs.file-max = 512 * PROCESSES
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 4194304
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 262144
配置oracle用户的环境变量和shell限制，编辑/etc/security/limits.conf，添加下面的内容：
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
编辑/etc/pam.d/login文件，添加下面的内容：
session required /lib/security/pam_limits.so
session required pam_limits.so
编辑oracle用户目录下的.bash_rc文件，添加下列环境变量：
umask 022
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi

export TMP=/tmp
export TMPDIR=/tmp
export ORACLE_BASE=/data/oracle
export ORACLE_SID=ora11g64
export ORACLE_HOME=/data/oracle/product/11.1
最后建立安装Oracle所需的目录结构。

代码:


[root@enterprice64 ~]# mkdir -p /data/oracle/product/11.1

[root@enterprice64 ~]# chown -R oracle.oinstall /data



.

准备工作做完了下面开始进行Silent方式的安装。
首先设置oraInst.loc文件：

代码:


[root@enterprice64 ~]# ls -l /etc/oraInst.loc 

-rw-rw-r-- 1 oracle dba 61 Oct 19 17:25 /etc/oraInst.loc

[root@enterprice64 ~]# more /etc/oraInst.loc 

inventory_loc=/data/oracle/oraInventory

inst_group=oinstall



.

确保/etc/oraInst.loc中包含上面的信息，且Oracle包含访问权限。
根据希望安装的数据库类型选择Silent的response_file文件的类似，比如：enterprise.rsp、standard.rsp还是custom.rsp。
这里选择enterpise.rsp类型，安装盘中的database/response目录下对应的response文件拷贝出来，根据文件里面的提示对输入值进行修改。
比如这个例子中对如下的参数进行设置：
UNIX_GROUP_NAME="oinstall"
FROM_LOCATION="/data/database/stage/products.xml"
ORACLE_BASE="/data/oracle"
ORACLE_HOME="/data/oracle/product/11.1"
ORACLE_HOME_NAME="ORADBHOME11"
SHOW_ROOTSH_CONFIRMATION=false
RESTART_SYSTEM=false
RESTART_REMOTE_SYSTEM=false
COMPONENT_LANGUAGES={"zh_CN"}
s_nameForDBAGrp="dba"
s_nameForOPERGrp="oinstall"
s_nameForASMGrp="asadmin"
n_configurationOption=3
s_ASMSYSPassword="asm"
s_ASMSYSPasswordAgain="asm"
注意，所有的字符串需要放在双引号中，注意大小写。数字和布尔变量直接写就可以。
由于这里没有选择建立数据库而只安装软件，因此没有设置数据库相关的配置参数。

代码:


[oracle@enterprice64 data]$ chmod 700 enterprise.rsp 



.

下面可以开始SILENT安装了：
注意，响应文件需要使用绝对路径。

代码:


[oracle@enterprice64 database]$ ./runInstaller -silent -noconfig -responseFile /data/database/enterprise.rsp

Starting Oracle Universal Installer...

Checking Temp space: must be greater than 120 MB.   Actual 8886 MB    Passed

Checking swap space: must be greater than 150 MB.   Actual 8189 MB    Passed

Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-10-19_06-40-04PM. Please wait ...[oracle@enterprice64 database]$ Oracle Universal Installer, Version 11.1.0.6.0 Production

Copyright (C) 1999, 2007, Oracle. All rights reserved.

You can find the log of this install session at:

 /data/oracle/oraInventory/logs/installActions2007-10-19_06-40-04PM.log

.................................................................................................... 100% Done.



Loading Product Information

................................................................................................................ 100% Done.



Starting execution of Prerequisites...

Total No of checks: 14

Performing check for CertifiedVersions

Checking operating system requirements ...

Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10,asianux-2,asianux-3

Actual Result: enterprise-5

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for Packages

Checking operating system package requirements ...

Checking for make-3.81; found make-1:3.81-1.1-x86_64.   Passed

Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-2.el5-x86_64.     Passed

Checking for gcc-4.1.1; found gcc-4.1.1-52.el5-x86_64.  Passed

.

.

.

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for Kernel

Checking kernel parameters

Checking for semmsl=250; found semmsl=250.      Passed

.

.

.

Checking for wmem_max=262144; found wmem_max=262144.    Passed

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for GLIBC

Checking Recommended glibc version

Expected result: ATLEAST=2.5-12 

Actual Result: 2.5-12

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for TotalMemory

Checking physical memory requirements ...

Expected result: 922MB

Actual Result: 7984MB

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for SwapSpace

Checking available swap space requirements ...

Expected result: 7984MB

Actual Result: 8189MB

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for DetectIfDHCPAssignedIP

Checking Network Configuration requirements ...

Check complete. The overall result of this check is: Not executed <<<<



Check complete: Not executed <<<<

Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses.  However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly.  See the Installation Guide for more details on installing the software on systems configured with DHCP.

========================================================

Performing check for CheckPathForOtherOracleHomes

Checking PATH environment variable...

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for CheckTempDiskSpace

Checking for sufficient diskspace in TEMP location...

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for CheckLdLibraryPath

Checking LD_LIBRARY_PATH environment variable...

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for OracleBase

Validating ORACLE_BASE location (if set) ...

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for OracleHomeSpace

Checking Oracle Home path for spaces...

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for DetectAnyInvalidASMHome

Checking for proper system clean-up....

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

Performing check for CompatibilityChecks_DB

Checking for Oracle Home incompatibilities ....

Actual Result: NEW_HOME

Check complete. The overall result of this check is: Passed



Check complete: Passed

========================================================

PrereqChecks complete



Analyzing dependencies 

..................................................................................................... 100% Done.



-----------------------------------------------------------------------------

Summary

Global Settings

    Source: /data/database/stage/products.xml

    Oracle Base: /data/oracle

    Oracle Home: /data/oracle/product/11.1 (ORADBHOME11)

    Installation Type: Enterprise Edition

Product Languages

   Simplified Chinese

   English

Space Requirements

   / Required 226MB (only as temporary space) : Available 8.56GB

   /data/ Required 3.63GB : Available 181.86GB

New Installations (126 products)

   Oracle Database 11g 11.1.0.6.0 

   Enterprise Edition Options 11.1.0.6.0 

   Oracle Partitioning 11.1.0.6.0 

.

.

.

   Oracle Universal Installer 11.1.0.6.0 

   Oracle One-Off Patch Installer 11.1.0.6.0 

   Installer SDK Component 11.1.0.6.0 

   Sun JDK 1.5.0.11.0 

-----------------------------------------------------------------------------



Installation in progress (Fri Oct 19 18:40:20 CST 2007)

...............................................................   6% Done.

...............................................................  12% Done.

...............................................................  19% Done.

...............................................................  25% Done.

...............................................................  31% Done.

...............................................................  38% Done.

...............................................................  44% Done.

...............................................................  50% Done.

...............................................................  57% Done.

...............................................................  63% Done.

...............................................................  69% Done.

...............................................................  76% Done.

.................................................                81% Done.

Install successful

Linking in progress (Fri Oct 19 18:42:27 CST 2007)

..                                                               81% Done.

Link successful

Setup in progress (Fri Oct 19 18:43:33 CST 2007)

...................................                             100% Done.

Setup successful

End of install phases.(Fri Oct 19 18:43:36 CST 2007)

WARNING:

The following configuration scripts need to be executed as the "root" user.

#!/bin/sh

#Root script to run

/data/oracle/product/11.1/root.sh

To execute the configuration scripts:

    1. Open a terminal window

    2. Log in as "root"

    3. Run the scripts

    

The installation of Oracle Database 11g was successful.

Please check '/data/oracle/oraInventory/logs/silentInstall2007-10-19_06-40-04PM.log' for more details.



.

最后使用root执行一下$ORACLE_HOME/root.sh脚本就可以了。
不过这里Oracle存在一个bug，在root.sh脚本中，自动将OUI_SILENT参数设置为TRUE，而后的检查中，如果发现这个值为TRUE，那么这个脚本运行会自动退出了。这里需要手工将其修改为FALSE，然后使用root执行：

代码:


[root@enterprice64 11.1]# ./root.sh 

Running Oracle 11g root.sh script...

The following environment variables are set as:

    ORACLE_OWNER= oracle

    ORACLE_HOME=  /data/oracle/product/11.1

Enter the full pathname of the local bin directory: [/usr/local/bin]: 

The file "dbhome" already exists in /usr/local/bin.  Overwrite it? (y/n) 

[n]: y

   Copying dbhome to /usr/local/bin ...

The file "oraenv" already exists in /usr/local/bin.  Overwrite it? (y/n) 

[n]: y

   Copying oraenv to /usr/local/bin ...

The file "coraenv" already exists in /usr/local/bin.  Overwrite it? (y/n) 

[n]: y

   Copying coraenv to /usr/local/bin ...

Entries will be added to the /etc/oratab file as needed by

Database Configuration Assistant when a database is created

Finished running generic part of root.sh script.

Now product-specific root actions will be performed.

Finished product-specific root actions.



.

对于root.sh的执行不要使用. root.sh的方式，这种方式可能造成脚本陷入死循环。
至此，数据库软件的安装已经完成，如果系统启动了SELINUX，那么这里还需要处理一个bug：
利用root改变SELINUX的设置：

代码:


[root@enterprice64 ~]# setenforce 0



.

至此，Oracle软件已经安装完毕：

代码:


[oracle@enterprice64 ~]$ sqlplus "/ as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Oct 22 14:07:28 2007
Copyright (c) 1982, 2007, Oracle.  All rights reserved.
Connected to an idle instance.
SQL>

上面介绍了如何在SILENT方式下安装11.1.0.6：http://yangtingkun.itpub.net/post/468/407375
这篇继续介绍SILENT模式下的数据库建立过程。


通过SILENT模式安装数据库之后，下面继续使用SILENT模式进行数据库的建立，仍然是拷贝安装目录下的/database/reponse/dbca.rsp到安装目录，并进行编译，根据数据库建立方式的不同编辑不同的数据库库选项。
比如在本次安装过程中设置了下列参数：
RESPONSEFILE_VERSION = "11.1.0"
OPERATION_TYPE = "createDatabase"
GDBNAME = "ora11g64.us.oracle.com"
SID = "ora11g64"
TEMPLATENAME = "New_Database.dbt"
SYSPASSWORD = "test"
SYSTEMPASSWORD = "test"
SYSMANPASSWORD = "test"
DBSNMPPASSWORD = "test"
DATAFILEDESTINATION ="/data/oracle/oradata/ora11g64"
RECOVERYAREADESTINATION="/data/oracle/flash_recovery_area"
CHARACTERSET = "ZHS16GBK"
TOTALMEMORY = "6000"
TEMPLATENAME = "ora11g64"
GDBNAME = "ora11g64.us.oracle.com"
SCRIPTDESTINATION ="/data/oracle/admin/ora11g64/scripts"
其中最后三项不是必须的，这个的目的是在建立数据库的同时生成脚本。
下面就可以开始SILENT模式的数据库创建了：

代码:


[oracle@enterprice64 database]$ dbca -silent -responseFile /data/database/dbca.rsp 

Creating and starting Oracle instance

1% complete

3% complete

Creating database files

6% complete

Creating data dictionary views

7% complete

8% complete

9% complete

10% complete

11% complete

12% complete

14% complete

16% complete

17% complete

18% complete

Adding Oracle JVM

23% complete

28% complete

33% complete

35% complete

Adding Oracle Text

36% complete

37% complete

38% complete

Adding Oracle XML DB

40% complete

41% complete

42% complete

45% complete

Adding Oracle Multimedia

46% complete

47% complete

56% complete

Adding Oracle OLAP

57% complete

58% complete

59% complete

Adding Oracle Spatial

60% complete

61% complete

62% complete

63% complete

66% complete

Adding Oracle Ultra Search

67% complete

73% complete

Adding Enterprise Manager Repository

75% complete

76% complete

Adding Oracle Application Express

80% complete

83% complete

Adding Oracle Warehouse Builder

87% complete

90% complete

Completing Database Creation

91% complete

92% complete

93% complete

94% complete

97% complete

100% complete

Look at the log file "/data/oracle/cfgtoollogs/dbca/ora11g64/ora11g64.log" for further details.



.

数据库建立完成：

代码:


[oracle@enterprice64 database]$ sqlplus "/ as sysdba"

SQL*Plus: Release 11.1.0.6.0 - Production on Mon Oct 22 17:28:02 2007

Copyright (c) 1982, 2007, Oracle.  All rights reserved.



Connected to:

Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production

With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL> select * from v$version;

BANNER

----------------------------------------------------------------------------

Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production

PL/SQL Release 11.1.0.6.0 - Production

CORE    11.1.0.6.0      Production

TNS for Linux: Version 11.1.0.6.0 - Production

NLSRTL Version 11.1.0.6.0 - Production



.

最后可以利用netca来SILENT方式设置网络部分，同样的方法设置netca.rsp：
RESPONSEFILE_VERSION="11.1"
CREATE_TYPE= "CUSTOM"
SHOW_GUI=false
LOG_FILE=""/data/oracle/product/11.1/network/tools/log/netca.log""
INSTALLED_COMPONENTS={"server","net8","javavm"}
INSTALL_TYPE=""typical""
LISTENER_NUMBER=1
LISTENER_NAMES={"LISTENER"}
LISTENER_PROTOCOLS={"TCP;1521"}
LISTENER_START=""LISTENER""
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
设置的参数包括上面的部分，然后就可以使用netca启动silent配置：

代码:


[oracle@enterprice64 database]$ netca /silent /responseFile /data/database/netca.rsp 

Mon Oct 22 18:26:40 CST 2007 Oracle Net Configuration Assistant

Parsing command line arguments:

    Parameter "silent" = true

    Parameter "responsefile" = /data/database/netca.rsp

    Parameter "log" = /data/oracle/product/11.1/network/tools/log/netca.log

Done parsing command line arguments.

Oracle Net Services Configuration:

Profile configuration complete.

Listener started at port:1521

Oracle Net Listener Startup:

    Running Listener Control: 

      /data/oracle/product/11.1/bin/lsnrctl start LISTENER

    Listener Control complete.

    Listener started successfully.

Listener configuration complete.

Oracle Net Services configuration successful. The exit code is 0

 

[oracle@enterprice64 database]$ lsnrctl status

LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 22-OCT-2007 18:31:20

Copyright (c) 1991, 2007, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))

STATUS of the LISTENER

------------------------

Alias                     LISTENER

Version                   TNSLSNR for Linux: Version 11.1.0.6.0 - Production

Start Date                22-OCT-2007 18:26:40

Uptime                    0 days 0 hr. 4 min. 39 sec

Trace Level               off

Security                  ON: Local OS Authentication

SNMP                      OFF

Listener Parameter File   /data/oracle/product/11.1/network/admin/listener.ora

Listener Log File         /data/oracle/diag/tnslsnr/enterprice64/listener/alert/log.xml

Listening Endpoints Summary...

  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))

  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=enterprice64)(PORT=1521)))

Services Summary...

Service "ora11g64.us.oracle.com" has 1 instance(s).

  Instance "ora11g64", status READY, has 1 handler(s) for this service...

Service "ora11g64XDB.us.oracle.com" has 1 instance(s).

  Instance "ora11g64", status READY, has 1 handler(s) for this service...

Service "ora11g64_XPT.us.oracle.com" has 1 instance(s).

  Instance "ora11g64", status READY, has 1 handler(s) for this service...

The command completed successfully



.

至此，SILENT安装方式完成。