超实用 Linux下通过VNC安装Oracle

以前写过一篇:在Solaris下安装VNC 远程安装Oracle,有朋友说在Linux下安装有问题.今天碰巧需要,在Linux上安装了一次(某些版本缺省既有安装).

　　首先从网上下载:

[oracle@jumper]$ wget
--10:34:32-- 
           => `vnc-4.0-x86_.tar.gz'
Resolving done.
Connecting to [83.170.68.194]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1,625,390 [application/x-gzip]

100%[==============================>] 1,625,390     52.67K/s    ETA 00:00

10:35:04 (52.67 KB/s) - `vnc-4.0-x86_.tar.gz' saved [1625390/1625390]

　　发现4.0版本安装起来更加方便,解压后按照README文档操作即可:

[root@xcorder ]# tar -xvf vnc-4.0-x86_.tar
vnc-4.0-x86_/
vnc-4.0-x86_/vncinstall
vnc-4.0-x86_/Xvnc
vnc-4.0-x86_/vncviewer
vnc-4.0-x86_/vncserver
.....
vnc-4.0-x86_/java/vncviewer.jar
[root@xcorder ]# cd vnc-4.0-x86_

[root@xcorder ]# ./vncinstall /usr/local/bin
Can't install manual pages to /usr/local/man/man1
Copying Xvnc to /usr/local/bin
Copying vncviewer to /usr/local/bin
Copying vncpasswd to /usr/local/bin
Copying vncconfig to /usr/local/bin
Copying vncserver to /usr/local/bin
Copying x0vncserver to /usr/local/bin
[root@xcorder ]# mkdir -p /usr/local/vnc/classes
[root@xcorder ]# cp java/* /usr/local/vnc/classes

　　此时即可启动vncserver: 

[root@xcorder ]# vncserver

You will require a password to access your desktops.

Password:
Verify:
xauth:  creating new authority file /root/.Xauthority

New 'xcorder.sky.cn:1 (root)' desktop is xcorder.sky.cn:1

Creating default startup script /root/.vnc/xstartup
Starting applications specified in /root/.vnc/xstartup
Log file is /root/.vnc/xcorder.sky.cn:1.log

　　如果存在防火墙,还需要开放防火墙,然后就可以通过浏览器在5801端口访问vncserver了.

　　可以通过如下命令确认端口已经正常启动:

[root@xcorder ]# netstat -an|grep 01
tcp        0      0 0.0.0.0:5801                0.0.0.0:*                   LISTEN     
tcp        0      0 0.0.0.0:5901                0.0.0.0:*                   LISTEN     
tcp        0      0 0.0.0.0:6001                0.0.0.0:*                   LISTEN     
.....

　　通过VNC远程安装Oracle是非常不错的一个选择.