题库内容摘自 . 更新时间：2008-9-20
1. What is a key advantage of the POWER5 technology over all other competitive offerings?
A. POWER5 supports multiple operating systems.
B. POWER5 supports more nodes in a clustered environment.
C. POWER5 hypervisor has significantly less overhead than hardware partitioning.
D. POWER5 has greater granularity of resources such as memory, processors and I/O.
Answer: D
2. Which of the following support dynamic LPAR?
A. AIX v5.1
B. AIX v4.3.3
C. SuSe Linux Enterprise Server 9 (SLES9)
D. SuSe Linux Enterprise Server 8 (SLES8)
Answer: C
3. A customer has two different applications, each requiring two processors. They are evaluating the followingthree alternatives:1) Two p5-520s each with two processors and 4GB memory2) One partitioned p5-550 with four processors and 8GB memory3) One partitioned p5-570 with four processors and 8GB memoryAll three solutions will work. However, when helping the customer decide which solution is best for theirenvironment, the pSeries technical specialist should convey which of the following pieces of information?
A. Solutions 2 and 3 allow for processor and memory CoD; however, both solutions require an HMC.
B. Solutions 2 and 3 allow for sharing of physical resources when AIX 5.3 is implemented; however, bothsolutions require an HMC.
C. All three solutions allow for sharing of physical resources when AIX 5.3 is implemented; however, solutions 2and 3 require an HMC.
D. All three solutions allow for processor and memory CoD; however, solutions 2 and 3 require an HMC.
Answer: B
4. A customer needs a very small AIX system to run their new application and is considering a 1-way p615.What key information should the pSeries technical specialist provide to the customer?
A. The 1-way p615 cannot be upgraded to a 2-way p615.
B. The 1-way p615 can be upgraded to a 2-way p615 should additional capacity be required.Pass4Side IBM 000-238Pass4Side Help you pass any IT Exams! Page 3 of 7
C. The p615 can be upgraded to a POWER5-based processor.
D. The p615 is not a good solution, as it does not take advantage of the Advanced POWER Virtualization features.
Answer: A
5. A customer is debating whether to use Shared Ethernet versus Virtual Ethernet. Which of the following bestdescribes a key difference between Shared and Virtual Ethernet?
A. Shared Ethernet runs on POWER4 systems
B. Virtual Ethernet runs on POWER4 systems
C. Shared Ethernet requires a Virtual I/O server and Advanced Power Virtualization
D. Virtual Ethernet requires a Virtual I/O server and Advanced Power Virtualization
Answer: C
阅读(220) | 评论(0) | 转发(0) |
