install FreeBSD 7.0 under ZFS

ZFS is an exciting new file system developed by Sun and recently ported to FreeBSD. Many people are excited by the possibilities of ZFS (including us) as it promises to simplify a great many things. It offers:

• increased reliability through checksums, multiple copies of data and self-healing RAID
• elimination of that dreaded “oh, if only I’d made the /var partition larger” feeling. Partitions can now be resized at any time and in fact can each be allocated up to the full size of the storage media.
• built-in compression and encryption
• built-in NFS file sharing
• clean, easy to use toolset for creating storage pools, volumes and much more
• snapshots and rollbacks for backups

Read more about some of the powerful commands

Installing ZFS on FreeBSD

Since it is early days for ZFS on BSD, the installer doesn’t yet support ZFS natively. So there are a few tricks to getting it up and running. Also, you cannot boot directly from a ZFS partition since adding that functionality to the boot loader in FreeBSD is a huge undertaking.

Step One: installing FreeBSD

• Boot up on the FreeBSD Current 7.0 CD
• Choose Country and Locale
• Go Custom install
• Partition fdisk with Auto option (one slice, whole disk)
• Disklabel with options

  A: 512Mb   UFS2  /
  B: swap
  D: rest of disk

To create D you’ll need to enter any mount point you want and then use the M option to clear it. This ensures that it will not mount or be created as a file system.
* Distribution choose Minimal install
* Media Select CD/DVD

System will install to the small 512Mb UFS root partition you created.

Step Two: creating the ZFS pool

• Once installation is complete, remove CD and reboot into our new FreeBSD system.
• Boot into FreeBSD partition and select “4” for single user mode.
• Hit ENTER to accept /bin/sh shell.

# mount -w / 

Now create a Disk pool using the D label we prepared during the install. In this example we have a SATA disk at ad4.

# zpool create tank /dev/ad4s1d

Firstly stop ZFS from creating default mountpoints for shares

# zfs set mountpoint=none tank

Create some extra/common mountpoints

# zfs create tank/root
# zfs create tank/usr
# zfs create tank/var
# zfs create tank/tmp

Now set the mountpoints of the shares

# zfs set mountpoint=/tank tank/root
# zfs set mountpoint=/tank/usr tank/usr
# zfs set mountpoint=/tank/var tank/var
# zfs set mountpoint=/tank/tmp tank/tmp

Have a look to what we have done

#df -h

#zfs list

Beautiful isn’t it? :)

Edit /etc/rc.conf and enable ZFS

# echo 'zfs_enable="YES"' >> /etc/rc.conf

Now copy the UFS bootable slice to the ZFS mountpoint. This gives us a workable FreeBSD installation under ZFS.

# find -x / | cpio -pmd /tank 

(you can ignore any errors here if you get them)

Step Three: solving the ZFS boot problem

The problem which remains is that FreeBSD will not be able to boot directly into ZFS since the bootloader doesn’t know anything about ZFS. So a little trick is that we put the kernel onto /boot which lives on the UFS partition. This gets the system running to the point where ZFS can be mounted and the rest of the boot proceeds.

Remove the /tank/boot just copied over from the UFS system:

# rm -rf /tank/boot

Now make the directory in which our UFS partition will be mounted. This will be useful later on when we want to update the contents of that slice from a running system. We also need to make sure that when the ZFS is booting up it can see the UFS bootdir.

# mkdir /tank/bootdir
# cd /tank
# ln -s bootdir/boot boot

Now we tell the loader on the UFS slice to load and boot from the contents of the ZFS volume:

# echo 'zfs_load="YES"' >>  /boot/loader.conf
# echo 'vfs.root.mountfrom="zfs:tank/root"'  >>  /boot/loader.conf

Edit /tank/etc/fstab so our UFS slice is mounted in the right location for when ZFS boots.

/dev/ad4s1a  /bootdir        ufs     rw      1       1 

When we reboot in a minute, we want the ZFS tank to mount in /var /usr /tmp and/ and not within the /tank location it is now. So set the true mountpoints:

# zfs set mountpoint=/tmp tank/tmp
# zfs set mountpoint=/usr tank/usr
# zfs set mountpoint=/var tank/var

Set root mount point to ’legacy’ so ZFS won’t try to mount it automatically. It should already have been mounted by the loader:

# cd /
# zfs set mountpoint=legacy tank/root

All Done!

Reboot and login as root. df -h and zfs list and you will see everything.

# df -h
Filesystem          Size     Used     Avail Capacity  Mounted on
tank/root           282G     454M     281G      0%    /
devfs               1.0K     1.0K     0B      100%    /dev
/dev/ad4s1a         496M     317M     139M     69%    /bootdir
tank/tmp            281G     1.1M     281G      0%    /tmp
tank/usr            287G     5.7G     281G      2%    /usr
tank/var            281G      76M     281G      0%    /var

# zfs list
NAME       USED  AVAIL  REFER  MOUNTPOINT
tank       6.27G  281G     454M    none
tank/root  16.2M  51.3G  16.2M  legacy
tank/tmp   1.10M  281G     1.10M    /tmp
tank/usr    5.75G  281G     5.75G    /usr
tank/var   75.5M  281G     75.5M    /var

All is done. :) Basic install completed. At this point you might want to install a more complete version of FreeBSD, install the ports system or anything else you normally do.

Creating a Mirror

That was pretty exciting.

Now let’s say that we have some important data on that drive and we are pretty keen not to lose it. So, let’s add another drive as a mirror under ZFS. In some ways this is even superior to a hardware RAID setup since ZFS is able to monitor the checksums on the disk and automatically detect which of the two drives has corrupted a block of data, transparently using the other and repairing if necessary.

• Install the HDD and boot up on the system.
• Login as root
• Run sysinstall
• Enter Custom Install
• Partition fdisk with Auto option (one slice, who disk) and press ’w’ to write changes
• Label with options

  A: 512Mb   /
  B: swap
  D: rest of disk empty (for zfs later) 

and once again, press ’w’ to save changes and state ’YES’ to the question it asks you about applying now. You’ll need to make this identical to the labels on the first drive.
* Exit sysinstall.

Check out what we have:

#zpool status

Add the 2nd drive to our mirror (our second drive comes up as ad6)

# zpool attach tank ad4s1d ad6s1d
# zpool status

and it will now show the two HDD’s in a mirror

  pool: tank
 state: ONLINE
 scrub: none requested
config:

        NAME        STATE     READ WRITE CKSUM
        tank        ONLINE       0     0     0
          mirror    ONLINE       0     0     0
            ad4s1d  ONLINE       0     0     0
            ad6s1d  ONLINE       0     0     0

errors: No known data errors

Now we have a mirror, but if we lose the first drive we will need the contents of the UFS slice copied to the second drive in order to reboot.

# newfs /dev/ad6s1a
# mkdir /mnt/bootdir
# mount /dev/ad6s1a /mnt/bootdir
# find -x /bootdir | cpio -pmd /mnt

This gives us another ready to use system on the 2nd HDD in case we have a failure on the 1st HDD with all the necessary zfs tools to move forward.

/boot/Loader.conf tweaks

As you know, ZFS within Freebsd is and Experimental system and there are still some bugs to iron out, if the system has so much disk access you crash, you can kernel panic with “kmem_suballoc” you can fix this by placing the following in /boot/loader.conf.

vm.kmem_size_max=”512M”
vm.kmem_size=”512M”
vfs.zfs.zil_disable=1

The amount for the kmem size is up to you but if you make sit too large you will kernel panic on boot up.

Disaster recovery

(Maybe necessary if you have just completed the before mentioned tweaks and rebooted)

With the way we have setup our system if the ZFS fails to boot or function for whatever reason we can still boot off the original minimal install at any time. To do this do the following:

• Boot up
• Choose #6 (Escape to Loader Prompt) at the boot menu.
• Suppress the mounting of the ZFS volumes like this and disable the zfs module:

# unset vfs.root.mountfrom
# disable-module zfs

• Suppress of kmem sizes

# unset vm.kmem_size
# unset vm.kmem_size_max

• Single user mode and boot

# set boot_single
# boot

• Login

and edit the /boot/loader.conf as necessary

# df -h
# zpool list

You will notice that it has not picked up the ZFS drives or the pool. Never fear we can import it!

#zpool import -d /boot/zfs

This loads the zpool data so the libraries can find the information it needs, now we need to import our pool using an alternate root.

#zpool import -f -R /tank tank

And check out that it has worked.

# df -h
# zpool list

Useful Commands

Create a mirror

#zpool create -m /usr/local/www/ mirror  ad4s1g ad6s1g

Show available pool/resources

#zfs list

Show Status of Disk/pool

#zpool status

Changing Mount points for created resources

#zfs set mountpoint=/ 

Data Limiting

# zfs set quota=10g testpool/testfs/dir1

(logically limits space)

# zfs set reservation=20g testpool/testfs/dir2

(logically preallocates space)

Unloading a kernel and choosing another one (in the boot loader mode)

 
# unload kernel
# boot/boot/kernel.old/kernel