Chinaunix首页 | 论坛 | 博客
  • 博客访问: 642287
  • 博文数量: 486
  • 博客积分: 10125
  • 博客等级: 上将
  • 技术积分: 5842
  • 用 户 组: 普通用户
  • 注册时间: 2008-10-27 18:34
文章分类

全部博文(486)

文章存档

2011年(52)

2010年(107)

2009年(289)

2008年(38)

我的朋友

分类:

2009-06-01 20:16:47

#!/bin/bash
#ise script
#ngdbuild -ise "./edn.ise" -intstyle ise -dd _ngo  -sd "../ngc/" -nt timestamp -i -p xc5vlx155t-ff1136-3 "mos8a_fpga_f2.edn" mos8a_fpga_f2.ngd -uc mos8a_fpga_f2.ucf

getdate="date +%Y/%m/%d"
gettime="date +%H:%M:%S"

PATH=/bin:/usr/bin
source /opt/Xilinx/10.1/ISE/settings32.sh

#additioncmd="-global_opt on -retiming on"
#additioncmd=" "

if [ $# -ge 2 ]
then
#    echo "number of parameter more than 1"
    echo $2 | grep -qv "[^0-9]" > /dev/null
    if [ "$?" -eq "0" ]
    then
#        echo "parameter 2 is digital"
        if [ "$2" -ge "0"  -a  "$2" -le "100" ]
        then
#            echo "costtab set to $2"
            costtab=$2
#            echo "costtab is $costtab"
        else
            echo "parameter 2 is bigger than 100 or less than 0"
            echo "shell will use default value 14"
            costtab=14
            echo "costtab set to $costtab"
        fi
    else
        echo "parameter 2 is no digital"
        echo "shell will use default value 14"
        costtab=14
        echo "costtab set to $costtab"
    fi
else
    echo "number of parameter less than 1"
    echo "shell will use default value 14"
    costtab=14
    echo "costtab set to $costtab"
fi

echo "costtab has set to $costtab now!"

func_pre()
{
if [ -d work ];
then
    echo "Directory work already exist! not create it again!"
else
    echo "Directory work no exist! create now"
    mkdir work
fi

if [ -d output ];
then
    echo "Directory output already exist! not create it again!"
else
    echo "Directory output no exist! create now"
    mkdir output
fi

if [ -e log.log ];
then
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "" >> log.log
    echo "**********************************************************************" >> log.log
    echo "**********************************************************************" >> log.log
    echo "new round of logic!" > log.log
else
    touch log.log
fi
}

func_check()
{
    if [ -d work ] && [ -d output ] && [ -e log.log ];
    then
        echo "check ok! continue."
    else
        echo "check fail!"
    fi
}

func_ngd()
{
#    dir=`pwd`
#    echo $dir
#    #cd ${dir}/work
#    cd work
#    dir=`pwd`
#    echo $dir
#    cd ..
#    dir=`pwd`
#    echo $dir
    cd work
    echo "finished !...."
    starttime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "ngdbuild start at ${starttime} " >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
    ngdbuild -intstyle ise -dd _ngo  -sd "../../ngc/" -nt timestamp -p xc5vlx155t-ff1136-3 "../mos8a_fpga_f2.edn" ../output/mos8a_fpga_f2.ngd -uc ../../ucf/mos8a_fpga_f2.ucf
    cd ..
}


func_map()
{
    cd work
    echo "" >> ../log.log
    echo "" >> ../log.log
    ngdbuildtime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "map start at ${ngdbuildtime}" >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
    map -intstyle ise -p xc5vlx155t-ff1136-3 -ol high -xe n -t $costtab -w  $additioncmd ../output/mos8a_fpga_f2.ngd -o ../output/mos8a_fpga_f2_map.ncd ../output/mos8a_fpga_f2.pcf
    cd ..
}

func_par()
{
    cd work
    echo "" >> ../log.log
    echo "" >> ../log.log
    maptime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "par start at ${maptime}" >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
    par -intstyle ise -ol high -t $costtab -w ../output/mos8a_fpga_f2_map.ncd ../output/mos8a_fpga_f2.ncd ../output/mos8a_fpga_f2.pcf
    cd ..
}

func_trce()
{
    cd work
    echo "" >> ../log.log
    echo "" >> ../log.log
    trcetime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "trce start at ${trcetime}" >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
    trce -intstyle ise -e 3000 -tsi ../output/mos8a_fpga_f2.tsi -xml ../output/mos8a_fpga_f2 ../output/mos8a_fpga_f2.ncd -o ../output/mos8a_fpga_f2.twr ../output/mos8a_fpga_f2.pcf
    #trce -intstyle ise -v 5 -tsi ../output/mos8a_fpga_f2.tsi -xml ../output/mos8a_fpga_f2 ../output/mos8a_fpga_f2.ncd -o ../output/mos8a_fpga_f2.twr ../output/mos8a_fpga_f2.pcf
    cd ..
}

func_bitgen()
{
    cd work
    echo "" >> ../log.log
    echo "" >> ../log.log
    bitgentime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "bitgen start at ${bitgentime}" >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
    bitgen -intstyle ise -f ../../.config/mos8a_fpga_f2.ut ../output/mos8a_fpga_f2.ncd
    cd ..
}

func_bingen()
{
    if [ -d bin ];
    then
        cd bin
    else
        mkdir bin
        cd bin
    fi

    echo "" >> ../log.log
    echo "" >> ../log.log


##    echo 'setMode -pff
##addConfigDevice -size 512 -name "Untitled" -path "../bin"
##setSubmode -pffparallel
##setAttribute -configdevice -attr spiSelected -value "TRUE"
##setAttribute -configdevice -attr dir -value "UP"
##setAttribute -configdevice -attr flashDataWidth -value "8"
##setMode -pff
##setSubmode -pffparallel
##setAttribute -configdevice -attr dir -value "UP"
##addDesign -version 0 -name "0000"
##setMode -pff
##addDeviceChain -index 0
##setAttribute -design -attr name -value "0"
##addDevice -p 1 -file "../../../mos8a_f3_top.bit"
##addDevice -p 2 -file "../output/mos8a_fpga_f2.bit"
##addDevice -p 3 -file "../output/mos8a_fpga_f2.bit"
##setMode -pff
##setSubmode -pffparallel
##setAttribute -configdevice -attr fillValue -value "FF"
##setAttribute -configdevice -attr swapBit -value "true"
##setAttribute -configdevice -attr fileFormat -value "bin"
##setAttribute -configdevice -attr dir -value "UP"
##setAttribute -configdevice -attr path -value "../bin"
##setAttribute -configdevice -attr name -value "Untitled"
##generate -generic -spi
##quit' > ./impact.cmd


    bingentime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "bingen start at ${bingentime}" >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
    impact -batch ../../.config/impact.cmd
    cd ..
}

func_clean()
{
    if [ -d work ];
    then
        rm -rf work
        echo "Delete work sucessful!"
    else
        echo "Work does no exist! Nothing to do!"
    fi
    if [ -d output ];
    then
        rm -rf output
        echo "Delete output sucessful!"
    else
        echo "Output does no exist! Nothing to do!"
    fi
    if [ -d bin ];
    then
        rm -rf bin
        echo "Delete bin sucessful!"
    else
        echo "Bin does no exist! Nothing to do!"
    fi
}

func_finish()
{
    cd work
    echo "" >> ../log.log
    echo "" >> ../log.log
    finishtime="`$getdate` `$gettime`"
    echo "**********************************************************************" >> ../log.log
    echo "process finish at ${finishtime}" >> ../log.log
    echo "**********************************************************************" >> ../log.log
    echo "" >> ../log.log
#touch report`date +%m%d%H%M`.txt
    echo "process finish at ${finishtime} ready to work again!"
    cd ..
}

case "$1" in
    check)
    func_check
    ;;
    pre)
    func_pre
    ;;
    ngd)
    func_ngd
    ;;
    map)
    func_map
    ;;
    par)
    func_par
    ;;
    trce)
    func_trce
    ;;
    bitgen)
    func_bitgen
    ;;
    bingen)
    func_bingen
    ;;
    clean)
    func_clean
    ;;
    all)
    func_pre
    func_ngd
    func_map
    func_par
    func_trce
    func_bitgen
    func_bingen
    func_finish
    ;;
    *)
    echo "default! your input is: $1"
    ;;
esac

阅读(308) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~