Autoconfig后FORM无法弹出

把生产环境clone到测试系统后，因为某种原因做了Autoconfig。之后开发人员反映测试系统的from打不开。

在metalink上查到一篇文档：Forms Applet not Started From Homepage After Run of Autoconfig [ID 989464.1](以fnd_icx_launch.launch为关键字)

其实文档是找对了，但最初我只是从Solution入手，修改了apps.conf后，不仅问题没有解决，连Apache启动都报错。

Solution

To implement a quick work-around to have Forms started properly again perform the following steps

1. In the access_log_pls verify the 'client' performing the request. In this case it's most likely the hostname (+domain) of the server used. Note down this value
   
2. In the apps.conf replace %oacore_fwk_nodes% with the value from 1 (for all references) and save the changes
   
3. Restart the Apache services using adapcctl.sh to have the changes picked up
4. Retest the issue to confirm Forms can be started properly

后来注意到文档中还的一句话：

The below text describes a cause for this issue. However keep in mind there will be multiple causes for the errors reported. For example having changed APPS password, but still using old password in the wdbsvr.app results in the same behavior/errors as reported here.

猛然想起，clone后为了改了测试环境的apps的密码，但却忘记改文件wdbsvr.app中的password了。