登录后提示:
Sun(tm) Advanced Lights Out Manager 1.0
Please login:admin
Please Enter password: ******
(Admin用户的初始密码是第一次使用SC时提示并设置的密码,不可忘记哦)
sc>
出现提示符“SC>”,说明登录成功。
3. 配置ALOM的IP
sc> setupsc
Entering Interactive setup mode. To exit and discard changes to that point, use Ctrl-C or to exit and save changes to that point, use Ctrl-Z.Do you wish to configure the enabled interfaces [y]? y
Should the SC network interface be enabled [y]? y
Should the SC email alerts be enabled [y]? n
Do you wish to configure the network interface [y]? y
Should the SC use DHCP to obtain its network configuration [n]? n
Enter the SC IP address [100.100.100.100]? 10.71.106.100
Enter the SC IP netmask [255.255.255.0]? 255.255.255.0
Enter the SC IP gateway address 100.100.100.100]? 10.71.106.1
Should the TPE link test be enabled [y]? y
Do you wish to configure the managed system interface [y]? y
What level of SC events should be reported to the managed system where valid settings are 0 (none), 1 (critical), 2 (critical and major) and 3 (critical,major and minor) [2]? 2
What action should the SC invoke if the OS is hung. The available options are 'none', 'xir' or 'reset' where an xir will attempt to collect diagnosis data befor e invoking a reset [xir]? xir
Do you wish to configure the network mana
Enter the number of mail servers to configure [0]? 0
Do you wish to configure the SC parameters [y]? n
Your ALOM configuration profile has been successfully completed. To activate your network configuration, please reset the SC.
4.配置完后,查看配置结果。
sc> showsc
Advanced Lights Out Manager v1.0
parameter value
--------- -----
if_network true
if_modem false
if_snmp false
if_emailalerts false
sys_autorestart xir
netsc_tpelinktest true
netsc_dhcp false
netsc_ipaddr 10.71.106.100
netsc_ipnetmask 255.255.255.0
netsc_ipgateway 10.71.106.1
mgt_mailhost
mgt_mailalert
sc_customerinfo
sc_escapechars #.
sc_powerondelay true
sc_clipasswdecho true
sc_cliprompt sc
sc_clitimeout 0
sc_clieventlevel 2
sys_eventlevel 2
ser_baudrate 9600
ser_parity none
ser_stopbits 1
ser_data 8
netsc_enetaddr 00:03:ba:40:a1:ec
sys_hostname iinscp2
sys_enetaddr 00:03:ba:40:a1:e3
5.配完IP后需要重启ALOM
sc>reset