欢迎加入IT云增值在线QQ交流群：342584734
分类：
2006-03-18 21:14:10
When the system attempts to boot, it fails to find a valid device as required by the boot-device path at device alias "disk". It then attempts to boot from the network:
screen not found. Can't open input device. Keyboard not present. Using ttya for input and output. Sun Ultra 30 UPA/PCI (UltraSPARC-II 296MHz), No Keyboard OpenBoot 3.27, 512 MB memory installed, Serial #9377973. Ethernet address 8:0:20:8f:18:b5, Host ID: 808f18b5. Initializing Memory Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet ...
At this point, the administrator realizes that the boot disk has failed, and queries the device aliases to find the one corresponding to the veritas mirror:
ok devalias vx-rootmirror /pci@1f,4000/scsi@3/disk@1,0:a vx-rootdisk /pci@1f,4000/scsi@3/disk@0,0:a . . .
The administrator then boots the system from the mirror device "vx-rootmirror":
ok boot vx-rootmirror
As the system boots, Veritas volume manager detects that the volumes on the rootdisk are not accessible, and detaches those plexes from the root volumes. In spite of this, the system is able to boot cleanly from the mirror device with no operator action required.
ok boot vx-rootmirror Boot device: /pci@1f,4000/scsi@3/disk@1,0:a File and args: SunOS Release 5.8 Version Generic_108528-16 64-bit Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved. Starting VxVM restore daemon... VxVM starting in boot mode... /usr/sbin/prtconf: getexecname() failed vxvm:vxconfigd: WARNING: Detaching plex rootvol-01 from volume rootvol vxvm:vxconfigd: WARNING: Disk rootdisk in group rootdg: Disk device not found configuring IPv4 interfaces: hme0. Hostname: pegasus VxVM starting special volumes ( swapvol rootvol var )... VxVM general startup... dumpadm: no swap devices could be configured as the dump device The system is coming up. Please wait. starting rpc services: rpcbind done. Setting netmask of hme0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway pegasus Starting sshd... This platform does not support both privilege separation and compression Compression disabled syslog service starting. savecore: no dump device configured savecore: no dump device configured dumpadm: no swap devices could be configured as the dump device Oct 28 14:06:20 pegasus savecore: no dump device configured Print services started. /dev/bd.off: not a serial device. volume management starting. No VVR license installed on the system; vradmind not started. No VVR license installed on the system; in.vxrsyncd not started. The system is ready. pegasus console login:
Once the reboot is complete, the administrator then logs into the system and checks the status of the system. Note that the device c0t0d0s2 is listed as "failed", and the all plexes on that device are listed as "DISABLED/NODEVICE".
pegasus console login: root Password: Last login: Mon Oct 28 12:27:20 on console Oct 28 14:06:52 pegasus login: ROOT LOGIN /dev/console Sun Microsystems Inc. SunOS 5.8 Generic February 2000 You have new mail. # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t1d0s2 sliced rootmirror rootdg online - - rootdisk rootdg failed was:c0t0d0s2 # vxprint -ht Disk group: rootdg DG NAME NCONFIG NLOG MINORS GROUP-ID DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE DC NAME PARENTVOL LOGVOL SP NAME SNAPVOL DCO dg rootdg default default 0 1035555399.1025.pegasus dm rootdisk - - - - NODEVICE dm rootmirror c0t1d0s2 sliced 3359 17690400 - v rootvol - ENABLED ACTIVE 13423200 ROUND - root pl rootvol-01 rootvol DISABLED NODEVICE 13423200 CONCAT - RW sd rootdisk-B0 rootvol-01 rootdisk 17690399 1 0 - NDEV sd rootdisk-02 rootvol-01 rootdisk 0 13423199 1 - NDEV pl rootvol-02 rootvol ENABLED ACTIVE 13423200 CONCAT - RW sd rootmirror-01 rootvol-02 rootmirror 0 13423200 0 c0t1d0 ENA v swapvol - ENABLED ACTIVE 2100000 ROUND - swap pl swapvol-01 swapvol DISABLED NODEVICE 2100000 CONCAT - WO sd rootdisk-01 swapvol-01 rootdisk 13423199 2100000 0 - NDEV pl swapvol-02 swapvol ENABLED ACTIVE 2100000 CONCAT - RW sd rootmirror-02 swapvol-02 rootmirror 13423200 2100000 0 c0t1d0 ENA v var - ENABLED ACTIVE 2100000 ROUND - fsgen pl var-01 var DISABLED NODEVICE 2100000 CONCAT - WO sd rootdisk-03 var-01 rootdisk 15523199 2100000 0 - NDEV pl var-02 var ENABLED ACTIVE 2100000 CONCAT - RW sd rootmirror-03 var-02 rootmirror 15523200 2100000 0 c0t1d0 ENA
The administrator replaces the failed disk with a new disk of the same geometry. Depending on the system model, the disk replacement may require that the system be powered down. Once the operating system can "see" the new disk c0t0d0 via the format command, the administrator tells Veritas volume manager to rescan the system via the "vxdctl enable" command.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0
/pci@1f,4000/scsi@3/sd@1,0
Specify disk (enter its number): ^D
# vxdctl enable
# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c0t0d0s2 sliced - - error
c0t1d0s2 sliced rootmirror rootdg online
- - rootdisk rootdg failed was:c0t0d0s2
Now the administrator can make use of "vxdiskadm" to manage the process of replacing the boot disk volumes.
# vxdiskadm Volume Manager Support Operations Menu: VolumeManager/Disk 1 Add or initialize one or more disks 2 Encapsulate one or more disks 3 Remove a disk 4 Remove a disk for replacement 5 Replace a failed or removed disk 6 Mirror volumes on a disk 7 Move volumes from a disk 8 Enable access to (import) a disk group 9 Remove access to (deport) a disk group 10 Enable (online) a disk device 11 Disable (offline) a disk device 12 Mark a disk as a spare for a disk group 13 Turn off the spare flag on a disk 14 Unrelocate subdisks back to a disk 15 Exclude a disk from hot-relocation use 16 Make a disk available for hot-relocation use 17 Prevent multipathing/Suppress devices from VxVM's view 18 Allow multipathing/Unsuppress devices from VxVM's view 19 List currently suppressed/non-multipathed devices 20 Change the disk naming scheme 21 Get the newly connected/zoned disks in VxVM view list List disk information ? Display help about menu ?? Display help about the menuing system q Exit from menus Select an operation to perform: 4 Remove a disk for replacement Menu: VolumeManager/Disk/RemoveForReplace Use this menu operation to remove a physical disk from a disk group, while retaining the disk name. This changes the state for the disk name to a "removed" disk. If there are any initialized disks that are not part of a disk group, you will be given the option of using one of these disks as a replacement. Enter disk name [,list,q,?] list Disk group: rootdg DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE dm rootdisk - - - - NODEVICE dm rootmirror c0t1d0s2 sliced 3359 17690400 - Enter disk name [ ,list,q,?] rootdisk The following volumes will lose mirrors as a result of this operation: rootvol swapvol var No data on these volumes will be lost. The requested operation is to remove disk rootdisk from disk group rootdg. The disk name will be kept, along with any volumes using the disk, allowing replacement of the disk. Select "Replace a failed or removed disk" from the main menu when you wish to replace the disk. Continue with operation? [y,n,q,?] (default: y) y Removal of disk rootdisk completed successfully. Remove another disk? [y,n,q,?] (default: n) n Volume Manager Support Operations Menu: VolumeManager/Disk 1 Add or initialize one or more disks 2 Encapsulate one or more disks 3 Remove a disk 4 Remove a disk for replacement 5 Replace a failed or removed disk 6 Mirror volumes on a disk 7 Move volumes from a disk 8 Enable access to (import) a disk group 9 Remove access to (deport) a disk group 10 Enable (online) a disk device 11 Disable (offline) a disk device 12 Mark a disk as a spare for a disk group 13 Turn off the spare flag on a disk 14 Unrelocate subdisks back to a disk 15 Exclude a disk from hot-relocation use 16 Make a disk available for hot-relocation use 17 Prevent multipathing/Suppress devices from VxVM's view 18 Allow multipathing/Unsuppress devices from VxVM's view 19 List currently suppressed/non-multipathed devices 20 Change the disk naming scheme 21 Get the newly connected/zoned disks in VxVM view list List disk information ? Display help about menu ?? Display help about the menuing system q Exit from menus Select an operation to perform: 5 Replace a failed or removed disk Menu: VolumeManager/Disk/ReplaceDisk Use this menu operation to specify a replacement disk for a disk that you removed with the "Remove a disk for replacement" menu operation, or that failed during use. You will be prompted for a disk name to replace and a disk device to use as a replacement. You can choose an uninitialized disk, in which case the disk will be initialized, or you can choose a disk that you have already initialized using the Add or initialize a disk menu operation. Select a removed or failed disk [ ,list,q,?] list Disk group: rootdg DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE dm rootdisk - - - - REMOVED Select a removed or failed disk [ ,list,q,?] rootdisk Select disk device to initialize [,list,q,?] list DEVICE DISK GROUP STATUS c0t0d0 - - error c0t1d0 rootmirror rootdg online Select disk device to initialize [,list,q,?] c0t0d0 The following disk device has a valid VTOC, but does not appear to have been initialized for the Volume Manager. If there is data on the disk that should NOT be destroyed you should encapsulate the existing disk partitions as volumes instead of adding the disk as a new disk. Output format: [Device_Name] c0t0d0 Encapsulate this device? [y,n,q,?] (default: y) n c0t0d0 Instead of encapsulating, initialize? [y,n,q,?] (default: n) y The requested operation is to initialize disk device c0t0d0 and to then use that device to replace the removed or failed disk rootdisk in disk group rootdg. Continue with operation? [y,n,q,?] (default: y) Replacement of disk rootdisk in group rootdg with disk device c0t0d0 completed successfully. Replace another disk? [y,n,q,?] (default: n) n Volume Manager Support Operations Menu: VolumeManager/Disk 1 Add or initialize one or more disks 2 Encapsulate one or more disks 3 Remove a disk 4 Remove a disk for replacement 5 Replace a failed or removed disk 6 Mirror volumes on a disk 7 Move volumes from a disk 8 Enable access to (import) a disk group 9 Remove access to (deport) a disk group 10 Enable (online) a disk device 11 Disable (offline) a disk device 12 Mark a disk as a spare for a disk group 13 Turn off the spare flag on a disk 14 Unrelocate subdisks back to a disk 15 Exclude a disk from hot-relocation use 16 Make a disk available for hot-relocation use 17 Prevent multipathing/Suppress devices from VxVM's view 18 Allow multipathing/Unsuppress devices from VxVM's view 19 List currently suppressed/non-multipathed devices 20 Change the disk naming scheme 21 Get the newly connected/zoned disks in VxVM view list List disk information ? Display help about menu ?? Display help about the menuing system q Exit from menus Select an operation to perform: q Goodbye.
Having replaced the disk in Veritas volume manager, the disk device is now listed as "online", and VxVM is in the process of attaching the replacement plexes to the original volumes.
# vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 sliced rootdisk rootdg online c0t1d0s2 sliced rootmirror rootdg online # vxprint -ht Disk group: rootdg DG NAME NCONFIG NLOG MINORS GROUP-ID DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE DC NAME PARENTVOL LOGVOL SP NAME SNAPVOL DCO dg rootdg default default 0 1035555399.1025.pegasus dm rootdisk c0t0d0s2 sliced 3359 17690400 - dm rootmirror c0t1d0s2 sliced 3359 17690400 - v rootvol - ENABLED ACTIVE 13423200 ROUND - root pl rootvol-01 rootvol ENABLED STALE 13423200 CONCAT - WO sd rootdisk-05 rootvol-01 rootdisk 2100000 13423200 0 c0t0d0 ENA pl rootvol-02 rootvol ENABLED ACTIVE 13423200 CONCAT - RW sd rootmirror-01 rootvol-02 rootmirror 0 13423200 0 c0t1d0 ENA v swapvol - ENABLED ACTIVE 2100000 ROUND - swap pl swapvol-01 swapvol DISABLED RECOVER 2100000 CONCAT - WO sd rootdisk-06 swapvol-01 rootdisk 15523200 2100000 0 c0t0d0 ENA pl swapvol-02 swapvol ENABLED ACTIVE 2100000 CONCAT - RW sd rootmirror-02 swapvol-02 rootmirror 13423200 2100000 0 c0t1d0 ENA v var - ENABLED ACTIVE 2100000 ROUND - fsgen pl var-01 var DISABLED RECOVER 2100000 CONCAT - WO sd rootdisk-04 var-01 rootdisk 0 2100000 0 c0t0d0 ENA pl var-02 var ENABLED ACTIVE 2100000 CONCAT - RW sd rootmirror-03 var-02 rootmirror 15523200 2100000 0 c0t1d0 ENA # vxtask list TASKID PTID TYPE/STATE PCT PROGRESS 161 PARENT/R 0.00% 3/0(1) VXRECOVER rootdisk 162 162 ATCOPY/R 01.22% 0/13423200/163680 PLXATT rootvol rootvol-01
After about an hour, all of the plexes have been synchronized, and full operating system redundancy has been restored:
# vxtask list TASKID PTID TYPE/STATE PCT PROGRESS # vxprint -ht Disk group: rootdg DG NAME NCONFIG NLOG MINORS GROUP-ID DM NAME DEVICE TYPE PRIVLEN PUBLEN STATE RV NAME RLINK_CNT KSTATE STATE PRIMARY DATAVOLS SRL RL NAME RVG KSTATE STATE REM_HOST REM_DG REM_RLNK V NAME RVG KSTATE STATE LENGTH READPOL PREFPLEX UTYPE PL NAME VOLUME KSTATE STATE LENGTH LAYOUT NCOL/WID MODE SD NAME PLEX DISK DISKOFFS LENGTH [COL/]OFF DEVICE MODE SV NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OFF AM/NM MODE DC NAME PARENTVOL LOGVOL SP NAME SNAPVOL DCO dg rootdg default default 0 1035555399.1025.pegasus dm rootdisk c0t0d0s2 sliced 3359 17690400 - dm rootmirror c0t1d0s2 sliced 3359 17690400 - v rootvol - ENABLED ACTIVE 13423200 ROUND - root pl rootvol-01 rootvol ENABLED ACTIVE 13423200 CONCAT - RW sd rootdisk-05 rootvol-01 rootdisk 2100000 13423200 0 c0t0d0 ENA pl rootvol-02 rootvol ENABLED ACTIVE 13423200 CONCAT - RW sd rootmirror-01 rootvol-02 rootmirror 0 13423200 0 c0t1d0 ENA v swapvol - ENABLED ACTIVE 2100000 ROUND - swap pl swapvol-01 swapvol ENABLED ACTIVE 2100000 CONCAT - RW sd rootdisk-06 swapvol-01 rootdisk 15523200 2100000 0 c0t0d0 ENA pl swapvol-02 swapvol ENABLED ACTIVE 2100000 CONCAT - RW sd rootmirror-02 swapvol-02 rootmirror 13423200 2100000 0 c0t1d0 ENA v var - ENABLED ACTIVE 2100000 ROUND - fsgen pl var-01 var ENABLED ACTIVE 2100000 CONCAT - RW sd rootdisk-04 var-01 rootdisk 0 2100000 0 c0t0d0 ENA pl var-02 var ENABLED ACTIVE 2100000 CONCAT - RW sd rootmirror-03 var-02 rootmirror 15523200 2100000 0 c0t1d0 ENA